Connects to any Power Probe circuit tester, limiting output voltage to 5V. Essential for safely testing sensors and computer circuits on vehicles.

Now you can supply a 5V reference signal to test computer modules, wiring and the components connected to them.

• Current limited 5V output
• Safely test computer sensor circuits
• Provides 5V reference voltage
• 12 - 24V input
• 5V output
• Standard 4mm banana connector

The Power Probe Digital Clamp Meter is an 80 Amp, auto-ranging clamp meter designed specifically for the automotive technician. This meter is rated CAT III 600V and can measure Volts, Amps, Ohms, Frequency and Temperature, necessary for automotive electrical testing. This meter's diagnostic applications include (but are not limited to) Parasitic Draw, Crank Current testing and HVAC Temperature testing.

Supplied with 3x AAA batteries.

• Voltage: AC 600V | DC 600V
• Current: AC 80A | DC 80A
• Display 4000 counts
• Jaw Opening 24mm/0.9"
• Auto & Manual Ranging
• Auto Power Off / Non-Contact Voltage Detector
• Diode Open Voltage 3.2V
• Continuity Buzzer <50
• Data Hold
• Large LCD Display Backlight
• Work Light
• Low Battery Display

The PPPWM is an adapter that is plugged into Power Probe circuit testers with 4mm banana plugs (such as THE MAESTRO / PP4 / PP3 / PP3EZ etc).

The adapter can be set for the output 0-100% pulse width drive waveform by pressing the key. Ideal for automotive applications such as automotive fan circuit detection, to find the part of the circuit failure, in order to replace and repair.

Duty cycle adjustable 5% - 100%.

For 12V / 24V use. 10A max continuous output.

The DM300AUTO is much more than a complete True RMS Digital Multimeter. It also includes several other functions of great utility for professionals in the automotive sector, such as checking the status of fuse protection, providing out of spec reading alerts, detecting parasitic draw, guiding automotive tests, checking the correct charging process of the alternator and measuring possible cranking voltages in the supply circuit.

The TFT colour display and the user friendly menu make this instrument an indispensable tool for automotive professionals.

• Measures current Flowing through fuses without removing the fuse (up to 80A)
• Fuse Voltage drop testing
• Guided automotive test such as Cranking Voltage / Alternator Charging
• AC/DC Voltage measurements up to 1000V
• Current measurements up to 30A
• Measures resistance, continuity and diode testing
• Frequency and duty cycle for PWM signals

Professional quality multimeter with oscilloscope functions

Fast A/D converting sampling time, built in data logging, and trend capture.

Bluetooth enabled, with App.

IP67 rated.

• 20MHz / 50MS/s bandwidth / real time sampling rate
• 320 x 240 px TFT colour LCD display
• CATIII 1000V / CATIV 600V
• Rechargeable battery

Next generation multimeter. Auto / manual ranging. Push button function selection. Highly accurate 9999 counts triple display. Non contact voltage. Backlight

A superb unit!

Great value auto ranging True RMS multimeter. Highly accurate, easy to use. 6,000 counts display. Measures current up to 10A.

• Includes temperature probe
• 2x AAA batteries included

Next gen technology! Use App to REMOTELY CONTROL multimeter, log data, graph live data etc. Ideal for hazardous environments, remote measurement (eg trucks) etc. 1000V CAT III

• Battery included

Download the App on the App store

Next generation multimeter with rotary dial.

Two LED lights - for illumination, plus continuity.

• 9000 counts
• Triple function display
• Non contact voltage

Auto/manual ranging DMM with inductive pick up & K type temperature probe. RPM measurement, millisecond pulse duty cycle, dwell angle. Data hold & relative functions.

Supplied in a sturdy plastic case.

• IP67 dust and waterproof
• Fused current inputs and overload protection
• High contrast 4000 counts display with backlight
• 9V battery included
• Automotive functions, with BONUS premium quality Silvertronic leads ET9408