Replacement battery cable clamp for the ET2709 code reader / battery tester.

An advanced CANbus circuit tester compatible with both 12V and 24V systems.

Provides a live display of present communicating signals, and can display the voltage of each pin without having to use a multimeter.

Essential for checking ground / voltage on all OBDII pins prior to connecting a scan tool / flashing ECU. If your scan tool cannot communicate, it could simply be a fault with the OBD connector.

• Connect inline with scan tools, Or use with a multimeter / oscilloscope.
• Quickly diagnose CAN faults.
• Monitor battery voltage at the OBD port.
• A great way to log pin voltage data when used with our ET2504 multimeter.

• 14 Pin Benz connector

• 20 Pin Isuzu connector

• 3 Pin Isuzu connector

• 30 Pin Iveco connector

Save time - flush out old grease with new. For bearings up to 3-1/2" OD. No airline or grease gun required.

Simply place the bearing on the piston. Press down on the cap until the old grease is forced out, and the new grease shows on top of the bearing.

• Works on bearings up to 3-1/2" OD (90mm)
• Packs up to 50 bearings before needing refilling