Digital measurement of battery fluid, screenwash, antifreeze (including synthetics) and aqueous / urea AdBlue® content.

This meter uses a rechargeable battery - DC3.7V 800mAH (not supplied).

• Easy to read 1.8" TFT colour display
• IP65 waterproof rating
• Automatic temperature compensation (ATC)

Fantastic value! A great entry level multimeter for the automotive professional.

• CAT III | 600V
• Manual ranging
• With temperature probe

Packaged in a BMC, this circuit tester has a standard 4mm connector which can be used with standard multimeter probes.

Wire piercer / probes / alligator clip included.

• Not for use with airbags / vehicle computers.
• For use with DC voltage only.

Great value auto ranging True RMS multimeter. Highly accurate, easy to use. 6,000 counts display. Measures current up to 10A.

• Includes temperature probe
• 2x AAA batteries included

Connects to any Power Probe. Limits output voltage to 5V. Essential for safely testing sensors and computer circuits on vehicles. Now you can supply a 5V reference signal to test computer modules, wiring and the components connected to them.

Phoenix System reverse brake bleeders are designed to push fluid up through the brake / clutch system. Essential for concentric clutch bleeding.

A great value entry level reverse brake bleeder.

• Simple, 1 man operation.
• Also able to pressure bleed.
• Tested for ABS Systems.

The Power Probe Digital Clamp Meter is an 80 Amp, auto-ranging clamp meter designed specifically for the automotive technician. This meter is rated CAT III 600V and can measure Volts, Amps, Ohms, Frequency and Temperature, necessary for automotive electrical testing. This meter's diagnostic applications include (but are not limited to) Parasitic Draw, Crank Current testing and HVAC Temperature testing.

Supplied with 3x AAA batteries.

• Voltage: AC 600V | DC 600V
• Current: AC 80A | DC 80A
• Display 4000 counts
• Jaw Opening 24mm/0.9"
• Auto & Manual Ranging
• Auto Power Off / Non-Contact Voltage Detector
• Diode Open Voltage 3.2V
• Continuity Buzzer <50
• Data Hold
• Large LCD Display Backlight
• Work Light
• Low Battery Display

Ensure your vehicle's cooling system stays corrosion-free and efficient with the ET5676 Antifreeze pH Meter - a professional tool designed to accurately measure the pH level of antifreeze and coolant solutions.

With EV vehicles as coolant decays, the acidity can increase, causing corrosion within the cooling system. This tester allows for quick testing of the coolant PH.

• Most automotive coolants should have an acidity level greater than 7.5. Check manufacturer specifications for suitable PH range.
• Measuring range: 0.00 - 14.00 PH | Resolution: 0.01PH | Accuracy: /- 0.1PH
• Operating temperature: 0 - 50¡C (Auto temperature compensation: 0 - 50¡C)
3x LR44 batteries (included)

Need a simple / fast / accurate way to test brake fluid & coolant? Are your customers asking for a test report to prove the fluid needs changing? Looking for more service opportunities? Test each car that comes into the workshop...

One double ended strip tests both coolant and brake fluid.

Simply dip a test strip into fluid for 60 seconds.

Patented FASCAR copper testing technology.

• Double the service opportunities
• Dual Brake / Coolant test strips
• Provide customers with a test report

Diagnose blown gaskets, cracked blocks and cylinder heads. Indicates CO2 in cooling system by test fluid colour change. Use with cone adaptor or with ET1049 adaptors.

• Any combustion leak will cause the blue liquid to turn yellow within 60 seconds.

Digital measurement of battery fluid, screenwash, antifreeze (including synthetics) and aqueous / urea AdBlue® content.

This meter uses a rechargeable battery - DC3.7V 800mAH (not supplied).

• Easy to read 1.8" TFT colour display
• IP65 waterproof rating
• Automatic temperature compensation (ATC)

A simple / effective tool for checking antifreeze concentration. Avoid winter freeze ups / summer boil overs! Can be used with warm / cold radiators.

• Durable construction with composite body, and rubber bulb.

Number of floating discs indicates coolant strength. Checks condition of coolant antifreeze at both cold & hot temperatures. Orange disc shows over protection / loss of efficiency.

• Suits model Ethylene Glycol antifreeze, include OAT (organic acid technology) antifreeze.
• Reads in Celsius / Fahrenheit. Shows the lowest temperature to which the cooling system is protected