Save time - flush out old grease with new. For bearings up to 3-1/2" OD. No airline or grease gun required.
Simply place the bearing on the piston. Press down on the cap until the old grease is forced out, and the new grease shows on top of the bearing.
- Works on bearings up to 3-1/2" OD (90mm)
- Packs up to 50 bearings before needing refilling
| SKU | ET0888 |
| Barcode # | 9321280371477 |
| Brand | Automotive |
| Product weight | 0.5200kg |
| Shipping weight | 0.520000kg |
12 Months
Others also bought
Brake Bleeder Adaptor Ford
An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system. This adaptor suits Ford / Mazda vehicles & Tesla model 3/Y.
This adaptor has a double o-ring design that seals to a depth of 14mm.
- Suits Ford / Mazda vehicles, as well as Tesla Model 3/Y (2017- ).
- Nitto style connector fitting
- Right angle connector
- Inner cap 36mm dia | Inner point to point 50mm (excluding lugs)
- 3 lug design
- Tesla OEM code: 1080578 00 C
Brake Bleeder Adaptor | 36m
An individual master cylinder adaptor for use with standard pressure brake bleeders, including the ETWH505H. This adaptor is designed to connect to the master cylinder reservoir to allow replacement brake fluid to be pushed through the system.This adaptor suits Tesla S / X vehicles.
- Applications: Holden Colorado (2017-) | Ford Transit (2019-) | Mazda 3 (2015-) | Tesla S (2012-) / X (2015-)
- Nitto style connector fitting
- 36mm dia
- 3 Lug bayonet fitting
- OEM Code: 1086619 00 B
Strut Support Clamp
An essential safety tool. Locks onto gas struts during vehicle service, to enable the struts to be fixed in an extended position. Universal application for all gas struts on boots, bonnets, hatch backs etc, as the clamp simply locks onto the strut's shaft.
- Aluminium body and brass tip to prevent damage to the lift support
- Magnet to hold the tool in place while securing the clamp
- For up to 13mm struts
More from this category
Metal Bearing Packer
This bearing packer is suitable for use with a grease gun, having a threaded centre post incorporating a grease nipple. Quality metal construction
Bearing range:
- 12mm ID (Max)
- 125mm OD (Max)
- 50mm height (Max)
Truck Bearing Packer
This is a larger capacity bearing packer designed for trucks, tractors etc.
- For bearings up to 6-1/2" OD.
- Metal cones
Universal Bearing Packer
Use with hand or power lube equipment to make a messy job easy, and also to ensure correct packing of bearings. Design incorporates a grease nipple at one end for quick connection to a grease gun coupler.
- For bearings with minimum 1/2" (13mm) ID to max 5" (125mm) OD & height up to 2" (50mm).
- Plastic cones.