A professional quality belt sander, with safety cover over the belt wheel, and a side handle for firm tool control. Made in Japan quality.

• 20 x 520mm belt size

A professional quality belt sander, with safety cover over the belt wheel, and a side handle for firm tool control. Made in Japan quality.

• Adjustable arm angle 160 degrees
• Integrated safety cover over belt wheel
• 30 x 540mm belt size

A professional quality industrial thermometer that can read up to 850 degrees celsius.

This thermometer is designed for industrial use and is not suitable for body temperature measurement.

• Automatic data hold / max temp display
• Battery included
• -50 to 850 degree C range

Essential test leads. Potentiometer | piercing probes | crocodile | flat terminals | signal tester and more.

• Potentiometer (variable resister) (1x)
• Signal tester / LED stroboscope (2x)
• Piercing probes (green / yellow)
• Test probe extension (2x)
• SRS (airbag) connector (1x)
• Crocodile clip adaptors (2x)
• Needle probes (4x)
• DMM test leads (2x)
• Banana plug extensions (4x)
• Flat terminals (8x)

Versatile kit with dies for crimping battery cables, balustrading wire, and swaging.

8T hydraulic crimping force for ease of use.

• Die Sizes: 6, 10, 16, 25, 35, 50 & 70mm² Swaging Die
• Overall length: 320mm

This advanced system tester is designed to test all 12V auto batteries (lead, AGM, EFB, GEL etc) including stop / start batteries. The unit tests battery condition PLUS charging (alternator) and starter (crank) systems.

The battery test analyses battery health status to calculate actual cold cranking capability of the battery. The tester will advise whether the battery needs replacing, and is also able to identify a faulty battery before actual failure.

The cranking test analyses the starting circuit (including the starter motor) by measuring increases in starting torque load. The charging test analyses the charging system, detecting under or overcharging.

• Testing range: 100 - 2,000CCA
• Powered from vehicle's 12V battery | no internal battery required

High speed / small body die grinder for demanding industrial applications where there is restricted access. Throttle lever with safety lock. Rear exhaust. Compact / lightweight / ergonomic design with made in Japan quality.

• Collet size: 1/4"
• Free speed: 25,000 RPM
• Air Consumption: 2.7CFM
• Optional collets: 1/8" | 3mm | 6mm

A workshop quality touch control ultrasonic cleaner. Unique dual frequency option for coarser or more intensive cleaning in the one unit.

This model features the following function modes:

Fullwave:

Fullwave mode is a standard cleaning mode based on a single frequency ultrasonic wave. Fullwave (40kHz for intensive clean.

Semiwave:

Semiwave mode is a soft cleaning mode based on a single frequency ultrasonic wave. The wave amplitude is half of the original single frequency. Semiwave (33kHz) for a coarse clean.

Degas mode:

Degas mode circulates periods of the common single frequency ultrasonic cleaning. For example, a pause, sweep, and another pause, making the cleaning liquid generate cavitations. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

Power Sweep:

Power sweep circulates the power of an ultrasonic wave from a low to a high value. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

• Inner dimensions: 330 x 270 x 150mm
• 40kHz frequency
• Drainage tap
• Supplied with metal basket
• Stainless steel tank
• Digital timer
• Digital temperature setting

Professional quality belt sanders, with JAPANESE bearings for smoother operation / extended life.

• Lightweight composite body tools.
• With safety lever
• Belt size: 10mm x 330mm

A professional quality belt sander with JAPANESE bearings for smoother operation / extended life. A lightweight composite body tool with safety lever.

• Belt size: 20mm x 520mm

Professional quality belt sander. Featurng lightweight composite body, and Japanese bearings to deliver longer / better performance. Backed by a 24 month warranty.

• Belt size: 30mm x 540mm

A professional quality belt sander, with safety cover over the belt wheel, and a side handle for firm tool control. Made in Japan quality.

• 20 x 520mm belt size

A professional quality belt sander, with safety cover over the belt wheel, and a side handle for firm tool control. Made in Japan quality.

• Adjustable arm angle 160 degrees
• Integrated safety cover over belt wheel
• 30 x 540mm belt size