A pack of high quality Roloc style CDR discs. These discs are designed for use with Roloc style sanders. These discs are made from high quality European fabric.

• 2" diameter
• Fine material (Blue)
• 10 pack

A pack of high quality Roloc style CDR discs. These discs are designed for use with Roloc style sanders. These discs are made from high quality European fabric.

• 2" diameter
• Medium material (Maroon)
• 10 pack

A pack of high quality Roloc style CDR discs. These discs are designed for use with Roloc style sanders. These discs are made from high quality European fabric.

• 2" diameter
• Coarse material (Brown)
• 10 pack

This backing pad is designed for use with Roloc style CDR discs. This backing pad is supplied with an arbor for use with die grinders.

• 2" diameter
• For use with Roloc style CDR discs

This backing pad is designed for use with Roloc style CDR discs. This backing pad is supplied with an arbor for use with die grinders.

• 3" diameter
• For use with Roloc style CDR discs

A professional quality industrial thermometer that can read up to 850 degrees celsius.

This thermometer is designed for industrial use and is not suitable for body temperature measurement.

• Automatic data hold / max temp display
• Battery included
• -50 to 850 degree C range

Essential test leads. Potentiometer | piercing probes | crocodile | flat terminals | signal tester and more.

• Potentiometer (variable resister) (1x)
• Signal tester / LED stroboscope (2x)
• Piercing probes (green / yellow)
• Test probe extension (2x)
• SRS (airbag) connector (1x)
• Crocodile clip adaptors (2x)
• Needle probes (4x)
• DMM test leads (2x)
• Banana plug extensions (4x)
• Flat terminals (8x)

This advanced system tester is designed to test all 12V auto batteries (lead, AGM, EFB, GEL etc) including stop / start batteries. The unit tests battery condition PLUS charging (alternator) and starter (crank) systems.

The battery test analyses battery health status to calculate actual cold cranking capability of the battery. The tester will advise whether the battery needs replacing, and is also able to identify a faulty battery before actual failure.

The cranking test analyses the starting circuit (including the starter motor) by measuring increases in starting torque load. The charging test analyses the charging system, detecting under or overcharging.

• Testing range: 100 - 2,000CCA
• Powered from vehicle's 12V battery | no internal battery required

This spill free funnel allows for refilling coolant while eliminating trapped air pockets. The kit includes adaptors for most vehicles, and extension / 45 degree elbows for those hard to reach radiator caps.

• Threaded cap / adaptors for Ford surge tanks / Holden threaded style radiators.

A workshop quality touch control ultrasonic cleaner. Unique dual frequency option for coarser or more intensive cleaning in the one unit.

This model features the following function modes:

Fullwave:

Fullwave mode is a standard cleaning mode based on a single frequency ultrasonic wave. Fullwave (40kHz for intensive clean.

Semiwave:

Semiwave mode is a soft cleaning mode based on a single frequency ultrasonic wave. The wave amplitude is half of the original single frequency. Semiwave (33kHz) for a coarse clean.

Degas mode:

Degas mode circulates periods of the common single frequency ultrasonic cleaning. For example, a pause, sweep, and another pause, making the cleaning liquid generate cavitations. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

Power Sweep:

Power sweep circulates the power of an ultrasonic wave from a low to a high value. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

• Inner dimensions: 330 x 270 x 150mm
• 40kHz frequency
• Drainage tap
• Supplied with metal basket
• Stainless steel tank
• Digital timer
• Digital temperature setting

This funnel can be molded into different shapes making it ideal to drain hard to reach oil filters.

This size is ideal for use with passenger vehicles. A larger size is available which is more suited for larger vehicles (ET7268).

• Suitable for use with engine oil, brake fluid, ATF and coolant
• Size: 170mm x 372mm

• High speed (19,000 RPM)
• 7/16-20 UNF spindle