Optional collet for Endeavour die grinders.

• Collet size: 6mm

Optional collet for Endeavour die grinders.

• Collet size: 1/8"

The ET2031B Universal Line Kit is a versatile, multi function diagnostic set designed for fast, secure connection to vehicle wiring during general engine testing and circuit evaluation. It enables quick probing, signal access, and component activation across a wide range of automotive systems, making it an essential tool for efficient fault finding and reliable electrical diagnostics.

This kit comes with a bonus multimeter - offering a comprehensive diagnostic solution.

• Dual-Function LED Testers - these two-way LED circuit testers allow for quick identification of power and ground signals, making fault-finding faster and more intuitive.
• Black & Red Multimeter Connector Leads - ensuring reliable connectivity for a wide range of diagnostic tasks.
• Round Terminal Adapters (Male & Female) to Banana Plug - male and female round terminal adapters connect seamlessly to standard banana plugs; ideal for interfacing with OEM wiring and connectors.
• Flat Blade Terminal Adapters (Male & Female) to Banana Plug - Includes flat blade terminal adapters for compatibility with common automotive spade connectors, improving versatility during testing.
• Variable Resistors with Banana Terminals - adjustable resistors allow technicians to simulate loads, test sensor circuits, and diagnose voltage dependent faults with confidence.
• Needle Style Piercing Probes - designed for clean, precise back-probing without damaging insulation; perfect for modern fine gauge wiring.
• Heavy Duty Alligator Clips - these rugged clips provide strong, secure connections to battery posts, chassis grounds, or test points, ensuring stable readings during diagnostic work.

Perfect for connecting to fuel injectors, MAP and TPS sensors, as well as any weather pack seal type connectors. The modular design is compatible with any industry-standard, 4mm plug whether shrouded or not. All probes are supplied in a protective plastic tube.

• 4 colours | 0.7mm (0.028") OD back probe pins
• Made in UK quality
• 1000V CAT III 20A

• IEC 1010 rating: 1000V CATIII double / reinforced insulation 20A
• Threaded contact
• 1.2m double insulated silicone cable
• Bi coloured layers

A workshop quality touch control ultrasonic cleaner. Unique dual frequency option for coarser or more intensive cleaning in the one unit.

This model features the following function modes:

Fullwave:

Fullwave mode is a standard cleaning mode based on a single frequency ultrasonic wave. 40kHz for intensive clean.

Semiwave:

Semiwave mode is a soft cleaning mode based on a single frequency ultrasonic wave. The wave amplitude is half of the original single frequency. Semiwave (33kHz) for a coarse clean.

Degas mode:

Degas mode circulates periods of the common single frequency ultrasonic cleaning. For example, a pause, sweep, and another pause, making the cleaning liquid generate cavitations. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

Power Sweep:

Power sweep circulates the power of an ultrasonic wave from a low to a high value. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

• Inner dimensions: 240 x 140 x 100mm
• 120W ultrasonic power / 100W heating power
• Supplied with metal basket
• Stainless steel tank
• Digital timer
• Digital temperature setting

A versatile heavy duty long handled riveter, suitable for alloy and stainless steel rivets - blind rivets / female nutcerts / male nutcerts.

• Stainless Rivets: To 6.4mm
• Nutcerts: To 12mm
• RivBolts: To 8mm

This master timing kit is specifically designed for LDV 20L4E engines. Enables precise engine timing during service & repair. Locks camshafts / crankshafts in correct position. Supplied in a convenient storage case for easy organisation.

• Engine code: 20L4E
• Applications: LDV D90 | G10, MG GS (2016 - 19) | H5 (from 2019)
• OEM equiv: C00044503 | C00044505 | C000515091

A versatile kit containing a high quality die grinder together with 10 assorted stones. The kit also includes a standard male airfitting and both 1/8" and 1/4" collets.

The die grinder is designed for industrial applications. It features a 0.5HP motor, plus low noise making it suitable for environments where low noise air tools are required.

• RPM: 22,000
• Avg air cons: 3.1 CFM
• Length: 180mm
• Includes 1/4" & 1/8" collet chucks

Professional quality metal body mini die grinder. Supplied with a 1/4" collet. Backed by a 24 month warranty.

• Power: 0.3HP
• Free Speed: 25,000 RPM
• Collet Size: 1/4"
• Air Consumption: 4.0 CFM
• Length: 153mm
• Other collet sizes available: 1/8", 3mm, 6mm

A high quality right angle die grinder designed for grinding, and high speed polishing tasks. The composite body provides reduced vibration, and more comfortable ergonomics. Provided with a safety throttle lever, and a rear exhaust to stream air away from the work area.

Backed by a 24 month warranty.

• Length: 155mm
• Power: 0.3HP
• Collet Size: 1/4"
• Free Speed: 22,000 RPM
• Air Consumption: 4 CFM (113 L/mins)
• Weight: 490g
• Other collet sizes available: 1/8", 3mm, 6mm

The RMAX-RADK 1/4" Mini Angle Die Grinder Kit is a compact, high-performance pneumatic tool designed for precision grinding and cutting. With a robust 20,000 RPM motor, front exhaust, and built-in comfort grip, it ensures smooth operation and reduced fatigue. Ideal for tight spaces, this lightweight grinder offers reliable power for professional and home workshop tasks.

Supplied with Roloc style abrasive / sandpaper disc accessory kit. Replacement discs available.

• 22,000 RPM
• 1/4" collet
• 126mm overall length

A professional quality compact die grinder. This unit features a feather touch throttle lever for easy operation, plus a composite body cover for added vibration / cold temperature protection.

• 1/4" collet
• 27,000 RPM

A professional quality medium body size die grinder. Compact, lightweight, ergonomic design and feather touch throttle lever.

• 1/4" collet
• 25,000 RPM free speed
• 4.0 CFM avg air consumption