An essential set of 18 keys for draining sumps, axles, gearboxes, differentials etc. 3/8" Sq Drv.

• Hex: 8, 9, 10, 12, 14, 17mm
• Square: 7, 8, 10, 11, 12, 13, 14mm
• Square: 5/16" (male), 3/8" (male) | 10mm (female)
• Spline (Sec): M16
• Triangular: 10mm

A combination air / hand powered pump for quickly extracting brake fluid, coolant, engine oil, transmission fluid etc. Do not use to extract petrol.

An optional hose to bleed brakes (with brake nipple connector) - ET3586-BRAK is also available.

• Massive 10L capacity avoids the need to remove drain plugs etc
• Supplied with 4 suction tubes (6mm oil | 7mm oil | brake fluid connector | 10mm gear oil)

This brake bleeder adaptor is designed for use with our pressure brake bleeder (ETWH505H). With adjustable wings, and a conical rubber plug, this brake bleeder adaptor is designed to fit round master cylinders with a 28mm - 70mm diameter.

This adaptor is suitable for changing DOT 3 and DOT 4 brake fluids, but NOT SUITABLE for changing DOT 5.1.

• Suits round cylinders with 28 - 70mm diameter
• Holds pressure up to 2.0 bar / 29 PSI
• Adjustable wings to fit various brake reservoir filler neck sizes
• 90 degree rotating coupling
• 28 - 70mm dia

• Rivet Sizes: 3/16" 3/32", 1/8", 5/32"
• Aluminium & mild steel rivets only

• Nose Pieces: 1/8" | 5/32" | 3/16" | 1/4"
• Traction Power: 1,700kg
• Stroke length: 14mm

• Nose Pieces: 1/8" | 5/32" | 3/16" | 1/4"
• Traction Power: 1,700kg
• Stroke length: 14mm

Single press operation for pulling and spinning out. With vacuum mandrel collection.

• Work capacity: 4.8 - 6.4mm (3/16"- 1/4") in all materials
• Stroke: 26mm
• Traction power: 3100lbs (1407kg)
• Nose pieces: 3/16, 7/32, 1/4"
• Weight: 1.88kg