Sonsbeek OTK Kit w/ Crimper
280 Pce | With Crimper
SKU: 250OTK-KIT
280 Pce | With Crimper
All common sizes of double ear OTK style clips for easy hose crimping. Side ear pincer plier included.
- 5x7 | 7x9 | 9x11 | 11x13 | 13x15 | 15x18 | 17x20 | 20x23 | 23x26 | 25x28
OTK Style Pincer | Side Ear
A specialised crimper for installing OTK style (double ear) clips where space is restricted.
- Special design side & top join pincer, ideal for use in confined areas.
- Jaw opening (top): 0-23mm | Jaw opening (side): 1-19mm
- 220mm overall length
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip | 13 - 15mm
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
- 13-15mm
- Mild steel
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Cllp
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip | 23-26mm
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
- 23 - 26mm range
OTK Style Pincer | Side Ear
A specialised crimper for installing OTK style (double ear) clips where space is restricted.
- Special design side & top join pincer, ideal for use in confined areas.
- Jaw opening (top): 0-23mm | Jaw opening (side): 1-19mm
- 220mm overall length
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip | 13 - 15mm
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
- 13-15mm
- Mild steel
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Cllp
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip | 23-26mm
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
- 23 - 26mm range
| SKU | 250OTK-KIT |
| Barcode # | 9321280387478 |
| Brand | Sonsbeek |
| Product weight | 2.2000kg |
| Shipping weight | 2.200000kg |
| Material | Mild Steel |
| Type | OTK Style Clip |
Consumable
Calculate Shipping
Flat Rate Shipping - $19.25
$19.25 flat rate shipping
Manual handling charge for long packaged products - $35.00
Manual handling charge for long packaged products
Others also bought
SmokeMan Digital Smoke Mach
Three-in-one leak detector solution - Air / smoke leak tests, Pressure decay and Vacuum leak (passive).
Compact, portable design with carry handle, and hook to hang it anywhere. Built in air compressor!
New 3.5" TFT colour display showing digital pressure, flow rate indication and real time test status.
- Use 12V vehicle battery as power supply
- Adjustable output pressure (0.5 - 20 PSI) for either EVAP or Turbo testing
- Supplied with comprehensive adaptor kit
