Quiet, efficient, regulated distribution of compressed air for drying, cleaning, cooling etc.

The blow gun is assembled with a flat nozzle giving a high blowing force, but with a low noise level / unblockable airflow. The airflow is spread out, which makes the gun impossible to block.

• 8 bar Max Working Pressure
• 580 l/min air flow (at 8 Bar)
• 81.5 dBA noise level

The Air Boy thrust gun is ideal for cleaning tasks where high airflow is needed. The thrust nozzle increases the airflow by 100% because of the venturi principle - and is at the same time unblockable.

This gun is supplied with two nozzles - a standard nozzle, and a 90 degree nozzle (for blowing out filters etc). Both nozzles simply screw on, and are replaceable.

The pipe is fitted with insulation that protects the hands against cold air.

• 1/4" BSP inlet
• 1,000mm long pipe
• Air flow: 600 litres / min @ 8 Bar
• Working pressure: max 12 Bar
• Noise level: 98.2Db @ 8 Bar

The Air Boy thrust gun is ideal for cleaning tasks where extremely high airflow is needed. The thrust nozzle increases the airflow by 100% because of the venturi principle - and is at the same time unblockable.

The standard nozzle supplied with the gun simply screws on / is replaceable. A 90 degree nozzle is available for purchase separately.

• 1/4" BSP inlet
• 300mm long pipe
• Air flow: 600 litres / min @ 8 Bar
• Working pressure: max 12 Bar
• Noise level: 98.2Db @ 8 Bar

Air Boy thrust guns provide a very high air flow, and offer a safe solution, as the nozzle is unblockable. The thrust nozzle increases airflow by 100% due to the venturi principle.

Air Boy thrust guns have a wide range of cleaning applications in commercial vehicles, trade and industry.

• Max 12 bar pressure
• 600 litres / min @ 8 Bar
• 98.2 dB @ 8 Bar

Non block tip prevents ÒDead Hand". Noise suppressor meets OH & S requirements (76 db @ 6 bar). Long blow guns are straight pipe (not bent tip like 124140125).

A safety blowgun equipped with automatic pressure reduction. If the tip is blocked, the air pressure will automatically be reduced to a lower pressure that fits the blowgun better in the blocked situation. Thereby, the blowgun can still be used in to some extend if it is blocked. This will also avoid damaging the blowgun.

These safety blowguns are available with either a bent or a straight pipe and is available with an air pressure reduction to max. 2.0 bar or 3.5 bar.

• Bent pipe blow gun
• 2.0 Bar pressure regulation when tip blocked
Maximum 16 bar pressure

A safety blowgun equipped with automatic pressure reduction. If the tip is blocked, the air pressure will automatically be reduced to a lower pressure that fits the blowgun better in the blocked situation. Thereby, the blowgun can still be used in to some extend if it is blocked. This will also avoid damaging the blowgun.

These safety blowguns are available with either a bent or a straight pipe and is available with an air pressure reduction to max. 2.0 bar or 3.5 bar.

• Straight pipe blow gun
• 2.0 Bar pressure regulation when tip blocked
Maximum 16 bar pressure

• Air flow cuts off when nozzle depressed
• 8mm bent pipe
• Low level noise 74dB (8bar), 72dB (6bar)