The Air Boy thrust gun is ideal for cleaning tasks where high airflow is needed. The thrust nozzle increases the airflow by 100% because of the venturi principle - and is at the same time unblockable.

This gun is supplied with two nozzles - a standard nozzle, and a 90 degree nozzle (for blowing out filters etc). Both nozzles simply screw on, and are replaceable.

The pipe is fitted with insulation that protects the hands against cold air.

• 1/4" BSP inlet
• 1,000mm long pipe
• Air flow: 600 litres / min @ 8 Bar
• Working pressure: max 12 Bar
• Noise level: 98.2Db @ 8 Bar

The Air Boy thrust gun is ideal for cleaning tasks where extremely high airflow is needed. The thrust nozzle increases the airflow by 100% because of the venturi principle - and is at the same time unblockable.

The standard nozzle supplied with the gun simply screws on / is replaceable. A 90 degree nozzle is available for purchase separately.

• 1/4" BSP inlet
• 300mm long pipe
• Air flow: 600 litres / min @ 8 Bar
• Working pressure: max 12 Bar
• Noise level: 98.2Db @ 8 Bar

A mini inline oiler designed to be attached close to the air tool. For use with air tools which have a 1/4" BSP inlet size.

This mini oiler provides consistent lubrication to extend tool life and maximize performance. Lightweight aluminium construction for leak free operation. Clear reservoir for easy monitoring of oil levels. Thumb screw filler cap.

• Thread type: Male - Female
• Thread size: 1/4" BSP
• Max working pressure: 150 PSI
• Material: Aluminium / polycarbonate

99.9999% EFFECTIVE! Inline point of use cyclonic filter. Removes 99.9999% of liquid / 99% solid particulates down to 1 Micron. ZERO ongoing maintenance costs.

• Auto drain
• 1/2" connection
• 10 CFM flow rate | 232 PSI max pressure
• No mains power required
• No replacement filters
• Instantaneous recovery from pulsed flows or stop start