Screw Extractors

Designed for use with air operated / cordless tools to quickly remove rounded imperial bolts.

1/4" hex drv for compatibility with impact drivers. Five common sizes.

• 1/4, 5/16, 3/8, 7/16, 1/2

Designed for use with air operated / cordless tools to quickly remove rounded metric bolts.

1/4" hex drv for compatibility with impact drivers. Five common sizes.

• 8, 9, 10, 11, 12 mm

Special design for removing damaged Torx / Torx Plus (and inhex) screws. Twisted star tip with tapered head.

• Sizes: 10mm Hex (3-6mm) | 12mm Hex (7-8mm) | 14mm Hex (10-12mm)
• S2 material for enhanced strength
• NOT for use with air / impact wrenches

• 4x easy out impact extractors 12x PH | PZ | TX bits.
• Made in Spain

A high quality kit of left handed drills. These are ideal for use for screw removal as the left handed motion can help loosen stuck screws.

European made quality for professional use.

• 2, 3, 4, 5, 6, 8mm

Remove broken studs, bolts, socket screws etc. Heat treated Chrome Moly steel. Sizes 1/8" through 13/32"

Sharp undercut edges | Long flutes. A quick and easy way to remove broken screws, bolts etc Made from heat treated Chrome Moly steel.

• Sizes: 3/8", 5/16", 15/64", 3/16", 1/8"

Made from special heat treated steel, this kit is designed to remove broken bolts / screws / studs. The extractors have left hand threads which lock into, and then remove the damaged component. This set contains six extractors for use on bolts / screws from 3 - 25mm.

• Extractor 1: 1/8 - 1/4" (52mm OL)
• Extractor 2: 1/4 - 5/16" (58mm OL)
• Extractor 3: 5/16 - 7/16" (66mm OL)
• Extractor 4: 7/16 - 9/16" (74mm OL)
• Extractor 5: 9/16 - 3/4" (81mm OL)
• Extractor 6: 3/4 - 1" (92mm OL)

These hex type screw extractors are designed for removing broken bolts / studs by drilling them out (drill not included).

Find a suitable sized drill and use it to create a hole on the broken stud or the stripped internal hex on the screw. Drill the hole deep enough so the screw extractor will have sufficient contact with the screw / stud. Finally insert a suitable-sized screw extractor and turn counter clockwise. The tip of the screw extractors have reverse threads, which means when you turn anticlockwise to remove the screw or stud, the reverse threads on the extractors will actually grab the object more tightly. The broken stud or stripped screw will then be removed easily. In some cases that the fasteners' threads are very stubborn, you can spray some lubricant, such as WD-40, and wait up for 3-5 minutes, and then the fasteners can be removed more easily. The other side of the screw extractors are 12mm and 16mm external hex, so you can just use a box wrench or a socket for removal. Please note that these extractors are not designed for installation.

• 12mm hex: 1/8, 3/16, 1/4, 3/8"
• 12mm hex: 3, 4, 5, 5.5, 6, 8mm
• 16mm hex: 11, 12, 14mm, 1/2"
• All extractors 28mm long
• Not for use with air / impact wrenches.