VAG

• 6mm ball end hex key
• OEM Equiv: T10264

Locks camshaft in place when changing the cam belt on 1.4L | 1.6L petrol engines.

Locks chain tensioner in position on VAG petrol engines with a cam belt driving one camshaft & then transferring drive by chain to the other camshaft. A must during assembly & disassembly on 4 | 6 | 8 cylinder engines.

• Applicable years: 98 - 06
• OEM Equiv: 3366 | T20018

For 4 Cyl Pumpe Duse diesel engines (1.9L | 2.0L engine with 2 & 4 valve) with arrow at 12 o'clock position with round sprockets. Also suited to FORD, SEAT & SKODA 1.9L TDi PD 3 & 4 cylinder engines.

• OEM Equiv: T10050

The DA0379-20 is a precision-engineered crankshaft pulley locking tool designed specifically for use on select Volkswagen Audi Group (VAG) diesel engines. It is an essential component in timing tool kits for 1.9L and 2.0L TDI engines, particularly those featuring oval crankshaft sprockets.

This tool is used to secure the crankshaft pulley in the correct position during timing belt replacement or engine servicing, ensuring accurate alignment and preventing costly engine damage. It is commonly included in comprehensive timing kits alongside its counterpart, the T10050, which is used for round sprockets.

• TDC marking at 1 o'clock
• OEM Equiv: T10100

A specialised cylinder head rebuilt kit designed to allow the camshafts to be correctly fitted into the cylinder head on Porsche / VAG common rail engines.

The set contains a jig, various camshaft support fixtures, gear tooth alignment clamps and locking devices.

• OEM Equiv: T40094 | T40095 | T40096
• Applications: VAG 1.6L | 2.0L | 2.7L | 3.0L | 4.0L | 4.2L diesel CR engines | Porsche 3.0 TDi
• For timing servicing on 2.7L - 4.2L engines, also refer ET1622.

A special 2 pin tension lever for Audi / Skoda / VW vehicles. Also suitable for use with certain LDV vehicles.

• 18mm PCD
• 3mm pin diameter

Comprehensive timing tool set for latest generation belt driven petrol TSI engines used across the VAG range. Includes support for 1.4L CoD (cylinder on demand) engines.

• OEM Equiv: T10340 | T10476 | T10477 | T10494 | T10499 | T10504

This timing kit is designed to lock the camshaft on 1.0 MPi 3 cylinder VAG engines in Volkswagen UP!, as well as Blue Motion & Ecomotive plus Green Tech engines.

This engine is a 3 cylinder twin camshaft unit, equipped with variable valve timing (VVT) on the tri lobed inlet camshaft sprocket with a conventional timing belt drive system.

• OEM Equiv: T10340 | T10477 | T10476 | T10499 | T10494 | T10487

A comprehensive kit for locking the camshaft / crank in their timed position. This allows for the servicing of the camshaft drive chain. Includes guide pins required for aligning the supercharger (on those engines to which it is fitted).

• Engine codes: CBZA | CBZB
• Applications: Audi A1 | VW Beetle, Caddy, Golf, Passat | Skoda Fabia, Rapid, Roomster, Yeti.

Designed for timing 1.4L | 1.6L 16v Valvetronic direct injection, chain drive petrol engines, fitted in BMW Mini, Citroen and Peugeot vehicles.

• Engine codes: 1.4L N12B14 | N12B14AB, 1.6L: EP3(8FS), EP3C(8FR), EP6(5FW), EP6C(5FS), EP6CDT(5FV), EP6DT(5FT), EP6DT(5FX), EP6DTS(5FY), N14B16A, N14B16CD, N14B16T0, N14B16CD/T0, N16B16A, N16B16K0, N16B16A/M0, N16B16A/MO, N16B16M0, N16B16U0

Specialised locking tool kit for 5th generation diesel Blue Motion engines. Set includes crankshaft locking tools for both styles of VAG sprockets.

• For Gen 5 common rail diesels (Blue Motion)
• Applications include 1.6L | 2.0L TDi engines fitted to Audi A3 | A4 | A5 | A6 | Q5, VW Golf | Passat | Tiguan
• OEM equiv: T20102 (3359) | T10050 |T10051 | T10052 | T10100 | T10255 | T10264 | T10265 | T40098

Timing chain tension lever designed to be used with the ET0900. Broad range of applications on 1.8L | 2.0L TSFI engines.

For pretensioning the timing chain and unlocking the chain tensioner. Attach to the cylinder head, and then push back the chain tensioning rail. Allows for replacement of timing chain without needing to remove the front cover.

• EA888 Gen III engines (but can also be used with Gen 1 & II)
• Engine codes: 1.8L | CDAA, CDHB, CJEB, 2.0L | CCZA | CCZB | CCZD | CDNB | CESA | CPSA
• OEM Equiv: T40243
• Designed to be used in conjunction with timing kit ET0900

Locking kit for a wide range of VAG 1.8L | 2.0L TFi / TFSi chain drive engines. Plus camshaft adjuster valve tools & crankshaft pulley holding tool.

• OEM Equiv: T10355 | T10368 | T10352 | T10352/1 | T20208 | T40011 | T40267

A specialised kit designed to lock the camshafts and crankshaft in position when servicing VAG EA888 4 cylinder 1.8L | 2.0L 16V petrol engines (2010-).

• Engines: 1.8L: BYT | CDAA | CDHB | CJEB 2.0L: CABB | CAWA | CAWB | CCZA | CCZB | CCZC | CCZD | CDNB | CDNC | CDND | CESA | CPSA

A timing tool kit for the latest chain driven FSI engines. Suits a wide range of V6 | V8 | V10 petrol engines.

• OEM Equiv: T20018 | T40133 | T40069 | T40070 | T40071 | T40079 | 3242 | T40058 | T40049
• Applications: VAG 2.5L | 3.2L FSI

The kit is designed for use with 2.5L engines to facilitate removal of the water pump. The manufacturer recommends that the water pump is replaced when removing / replacing the cylinder head.

Companion to ET1469

• Applications: VW T5 | Touareg 2.5D
• OEM Equiv: T10221A | T10225 | T10222A

Specialised tool for turning crankshaft over when servicing the timing chain. Applications include Audi A6 | A8, VW Phaeton.

• 1/2" Sq Drv
• Engines: 3.2L V6 4V | 4.2L V8 5V
• Applications: Audi A6 | A8, VW Phaeton
• Engine codes: BAS | CALA
• OEM Equiv: T40049

For fixing camshaft position sensor rotor ring when installing camshaft timing chains. Use in conjunction with ET1470A.

• Applications: Audi AllRoad (C5) | A6 | A8 | Phaeton | S4
• OEM Equiv: T40047
• Engine Codes: BAS | BAT | BBK | BFM | BGH

A timing tool kit for the 4.2L V8 R-CAT engine used in Audi vehicles. The kit is designed to lock the timing of camshafts and cam sensors.

• Applications: Audi Allroad | A6 Quattro | S4
• Engine Codes: BAS | BAT | BBK
• OEM Equiv: T10068A | T40046 | T40047

Auxiliary belt tensioner wrench for removing / installing the poly V-belt on 1.4L 4 Cyl TSi / TSi BlueMotion engines (turbo & supercharged).

• OEM Equiv: T10447

For changing V ribbed belts. Use with 1/2" sq drv ratchet or breaker bar.

• Engine codes: ABA | AHL | AHU
• Applications: VW Golf | Passat | Polo (93-99)
• 15mm wide slot.

For tensioning Multi Vee belts. For VAG engines on which the Multi Vee belts can only be tightened at the alternator.

• 1/2" Sq Drv

Locking tensioning pin for ribbed V belts.

• Engine codes: AAH | AFC | AAN | APB | AHA | ATQ | AVK | ART | AWN | BBD | BWA
• OEM Equiv: T10060/A

For servicing the camshaft adjuster securing bolt on 2.0L TFSi engines. M10 Polydrive (short version) - longer version T10070.

Do NOT use a standard Torx socket when removing the bolt on the camshaft sprocket.

• M10 Polydrive (6 splines)
• 54mm length
• OEM Equiv: T40080
• 1/2" Sq Drv

A set of three assembly camshaft tools for removing camshaft control valves before chain removal, on 4 Cyl chain drive petrol engines.

• Application: 1.8L | 2.0L 4 Cyl chain drive petrol engines
• OEM Equiv: T10352 | T10352/1 | T10352/2
• 3/8" Sq Drv

For locking camshafts when checking timing on A4 | A6 with 8 cylinder engines.

• OEM Equiv: T40046

Better alignment with 2 ground shoulder screws & facilitates timing adjustment with the vacuum pump & cam cover still in place. The ground screws slide the setting bracket easily into the camshaft slot with the addition of the knob for precise alignment.

• OEM Equiv: 3418 | T10098 | T20038

Setting plate for valve timing on VAG chain drive VR6 engines. Also for FORD Galaxy 2.8L (VR6)

• Size: 175mm wide x 95mm long.

Rotate and hold the camshaft on 1.8L | 2.0L TFSI Gen III petrol engines. Use with ET0281 timing kit, and ET9716 crankshaft pulley holding tool.

• Engine: 4 Cyl 1.8L | 2.0L 4V TFSI (Gen III)
• 3/8" Sq Drv
• OEM Equiv: T40266

Timing pin for locking the crankshaft in place when adjusting valve timing on 1.4L 4 Cyl TSi engines.

• Applications: Golf (04-)

Locks the crankshaft at TDC when servicing timing belt and flywheel / drive plate or adjusting valve timing. 2.0L | 2.4L | 2.8L | 3.0L | 3.2L FSI chain driven engines.

Removes the front pulley from the crankshaft on VW | Audi 4 & 5 cylinder engines.

A specialised puller for removing the toothed belt pulley from the high pressure pump, in order to enable the removal of the pump. This tool is essential for removing the injection pump.

• Engine: 1.6L | 2.0L TDI
• Application: VW Touareg V6
• OEM Equiv: T40064

Used while removing the harmonic damper on 5 cylinder engines with V-poly belts to simultaneously react against the crankshaft pulley (saves time & avoids damage to the damper).

A specialty tool for counter holding the fuel pump sprocket during timing service.

• Applications: VW Golf VII | Jetta VI | Passat B7
• OEM Equiv: T10051

A popular timing tool kit for a wide range of common Audi / Skoda / VW vehicles including many 1.4 | 1.9 | 2.0 TDi PD DOHC engines.

• Includes two versions of the camshaft sprocket locking tool.
• For belt driven diesel engines.

Correctly sets the toothed belt on the automatic tensioning pulley on the 2.5L TDi engine. Also used on Volvo vehicles.

• Applications: Audi | Volvo 2.5 TDi (92-01)
• 32mm x 117mm long
• OEM Equiv: 3355 | 999 5649

A set ot two cam belt tensioner tools for Volkswagen 4 Cyl TDI PD SOHC diesel engines. Also certain Audi / Skoda applications. These tension tools are designed for Pumpe Duse and Common Rail diesels fitted with larger engine mounting brackets.

• OEM Equiv: T10264 | T10265