Supplementary Tools

Required tools when replacing the crank seal / removing front engine cover to replace the chain. For use on 2.0L | 2.2L | 2.4L | 3.2L TDCi / TDDi Duratorq engines fitted to Ford Transit | Ford Ranger plus Jaguar X Type X400 and Land Rover Defender.

• First component removes diesel pump sprocket cover, and also allows oil seal to be removed / replaced.
• Second component aligns / centralises the front camshaft chain cover before fitting the new oil seal.

For 4 Cyl Pumpe Duse diesel engines (1.9L | 2.0L engine with 2 & 4 valve) with arrow at 12 o'clock position with round sprockets. Also suited to FORD, SEAT & SKODA 1.9L TDi PD 3 & 4 cylinder engines.

• OEM Equiv: T10050

For 1.0L 3 Cyl EcoBoost GDTi engines.

• OEM Equiv: 303-1602

For SCTI EcoBoost / Ti-VCT 2.0L petrol engines.

• OEM Equiv: 303-1504 (999-7405 | 303-1061)

Specially designed head profile permits access via a deep socket (not included) to each of the pulley bolts in turn.

• Applications: Mondeo / Transit / Ranger with 2.0L | 2.2L | 2.4L | 3.2L Duratorq diesel / Duratec petrol engines.
• 600mm OL

Flywheel locking pin for Ford Duratorq engines with common rail fuel injection. The pin locks the flywheel when changing the cam belt.

Applications include Mazda BT-50 | Ford Ranger | Ford Everest

• OEM Equiv: 0198-A | 303-675 | 303-698
• Engines codes: 3.2L P5AT | MZ-CD

Flywheel locking tool for the 2.7D For Territory engine.

• OEM Equiv: 303-1586

This set locks / holds the flywheel in position to allow the release of the crankshaft pulley screws during timing belt replacement. It has the same functions as ET1574 but with the extra locking adaptors expanding its use on a larger model group in the Ford petrol & diesel engine range.

• Applications across a wide range of Ford engines especially: Diesel 1.8TDdi / TDCi 2.0TDCi, Petrol: 1.6Ti-VCT | later 1.25L / 1.4L 16v Duratec
• Adaptor lengths: 11mm | 29mm | 42mm

This tool locks the sprocket of the injection pump in position on Ford Duratorq TDDi / TDCi engines.

• Applications: 2.0L | 2.2L | 2.4L Duratorq TDCi (Puma) engines, on Mondeo | Transit.
• Approximate dimensions: 115mm OD | 69mm ID | Height 22mm

Essential tools for allowing the removal of the chain driven high pressure diesel fuel pump, while maintaining the engine timing and chain position.

Designed to be used with the ET9161 to remove the sprocket cover.

• Kit comprises ET1311 / ET1512