Oil filter housing removal wrench for difficult to access oil filter covers on Ford Duratorq 2.0L & 2.2L TDCI engines (including Ford Mondeo). Crowsfoot design.

This wrench is designed to easily wrap around the inlet manifold allows for quick removal of the oil filter cap.

• 27mm | 12 Point
• OEM Equiv: 303-1579
• Applications: 2.0L | 2.2L Duratorq (DW10C / DW12C)

Oil pump locking tool for 2.0L, 2.2L, 2.4L, 3.2L diesel engines and 2.3L Duratec petrol engines.

Allows the oil pump to be removed / replaced in the same position (to ensure that the oil pump is not operating with excessive side loads).

• Mondeo | Ranger | Transit (2.0 / 2.2 / 2.4 / 3.2 TDCi / TDDi / Di Duratorq)
• OEM Equiv: 303-705 | 303-1093 (PSA 0198H)

This modest little set is designed for the 2.0L / 2.2L DOHC common rail diesel engines in Ford, Land Rover, Peugeot & Volvo vehicles.

It allows the camshaft pulley to be locked using the timing pin while securing the flywheel / ring gear with the locking pin & plate. The cam belt transmits drive from crankshaft to camshaft then from one camshaft to the other by chain located in the cylinder head.

• OEM Equiv: 303-393 | 303-393-01 | 303-1059 | 303-1277

This timing tool kit is designed for 2.0L | 2.4L Ford Duratorq engines (including timing pump removal / installation). Suits engines built from 2002 - 2010.

The kit includes a chain tensioner, fuel pump cover removal tool, fuel pump sprocket locking tool, and camshaft / crankshaft sprocket alignment pins.

• Applications: Ford Transit VH VJ VM | Jaguar X-Type X400
• Engine codes: BG | D2FA | FXFA | H9FA | H9FB
• OEM Equiv: 303-249 | 303-675 | 303-679A | 303-682 | 303-698 | 303-1151

This kit is designed for timing belt replacement on 2.7L | 3.0L V6 diesel engines on Land Rover (TDV6), Jaguar, and Citroen engines.

• Engine codes: JLR 276DT | 306DT | AJV6D, Citroen DT20C

A specialised kit containing all tools required to lock the new JLR 2.0L ÒIngenium" diesel engine in its timed position so that the engine timing chain can be safely removed and replaced and the engine timing checked.

This kit includes a tool for locking the fuel pump sprocket and chain in a fixed position when removing / replacing the fuel pump.

• Engine codes: AJ-200D (AJ200D), 204DT, 204DTD
• OEM Equiv: 303-1625 | 303-1627 | 303-1630 | 303-1631

Safely remove / fit / time gear driven balance shafts on JLR AJ200 2.0L diesel engines. A comprehensive kit for aligning balance shafts when reassembling components.

For camshaft timing, please refer to our ET7530 timing kit.

• Engine codes: 2.0L Diesel, AJ20 / 204DT | AJ20 / 204DTA | AJ-200D / 204DT | AJ-200D | AJ-200D / 204DTA | 204DTA |AJ-200 / 204DTD
• 303-1662, 303-1663-1, 303-1663-2, 303-1663-3, 303-1664, 303-1665

This kit has been designed to quickly / safely fit the rear crankshaft oil seal on JLR 2.0L diesel Ingenium engines.

• Engine code: AJ200
• Applications: E-Pace (from 2017) | F-Pace (2016-2020) | XE (2015-2020) | XF (2015-2020), Land Rover Discovery (from 2017) | Discovery Sport (2015-2019) | Range Rover Sport (2016-2018) | Range Rover Velar (from 2017)

An essential tool for installing the crankshaft position sensor ring on JLR vehicles fitted with the TDV6 engine, and also the trigger wheel to the rear crankshaft of Jaguar engines (300 powertrain).

• Applications: Land Rover Discovery 3 & 4 | Range Rover Sport, Jaguar X200 S Type | X250 XF | X350 XJ | X351 XJ, Ford Territory
• Engines: 2.7L | 3.0L TDV6 diesel
• OEM Equiv: 303-1130

This kit comprises a specialised tool to hold the crankshaft pulley while installing / removing the crankshaft bolt on late model (2010 onwards) 3.0L | 5.0L engines, plus a deep socket for the crankshaft front pulley bolt.

• Engine codes: AJ126 | 306PS | 508PN | 508PS

A set of tools for the removal of the front crankshaft pulley (crankshaft vibration damper) fitted to the Jaguar | Land Rover 3.0L V6 and 5.0L V8 petrol engines. These crankshaft pulleys are tightened to 200 Nm so are very tight to undo and must be held by the holding tool in this kit. Also included in this kit are the components required to remove the pulley safely.

• Engine codes: AJ126 | 306PS | 508PN | 508PS
• OEM Equiv: 303-1437 | 303-1438 | 303-1439 | 303-1439 | 303-1440 | 303-1441

A specialised deep socket for the crankshaft front pulley bolt on late model (2010 onwards) 3.0L V6 | 5.0L V8 engines. Use in conjunction with the ET1017L.

• Applications: Jaguar XK (10-15) | XJ (00-16) | XF (10-16) | XE (16) | F Type (14-16), Land Rover LR4 (10-16) | Range Rover (10-16) | Range Rover Sport (10-16)
• OEM Equiv: 303-1438 (3031438)
• 3/4" Sq Drv

A special injector removal tool for petrol injectors on JLR 5.0L V8 engines. The angled shaft provides better access when working especially on the rear injectors.

• Applications: XK | XF | XJ (with 5.0L V8 engines)
• OEM Equiv: 310-197

A specialised timing kit for late model JLR vehicles fitted with the 2.0L GTDi engine.

• Engine code: 204PT
• Applications: Jaguar e-Pace (17-), XF (12-) | Land Rover Discovery Sport (15-), Freelander 2 (12-15), Range Rover Evoque (11-)
• OEM Equiv: 303-748 | 303-1521 | 303-1594 | 303-1595 | 303-1600

Aligns the V8 crankshaft when changing timing chains on pre 2010 V8 chain driven engines (from 4.0L - 4.4L).

• Jaguar: XJ (97-08) | S Type (99-08) | XF (08-) | XK (97-08)
• Land Rover: Range Rover LM AJ34 (06-09) | Sport (05-09) | Discovery III (05-09)
• Engine codes: AJ26 | AJ27 | AJ28 | AJ34 | 448PN

A comprehensive kit for locking camshaft / crankshaft on 5.0L V8 petrol engines (10-).

This kit includes timing tools for locking the camshaft / crankshaft and also special tensioning wrench / camshaft turning tools.

• Engine codes: 306PS / AJ126, 508PN | 508PS

A specialised timing kit for late model AJ200 / PT204 2.0L petrol engines for Jaguar / Land Rover. This kit contains all necessary tools to lock the engine into its timed position.

• Engine codes: AJ200 | PT204
• Applications: Jaguar E-Pace | F-Pace | XE | XF, Land Rover Defender | Sport | Velar
• OEM Equiv: 303-1630 | 303-1635 | 303-1636

A cup style oil filter wrench suited to post 2010 Land Rover vehicles. Part of the Endeavour Tools range of specialty oil filter wrenches.

• 90.2mm dia x 15F
• Engine: 5.0L V8 Petrol engine (2010>)
• Applications: Jaguar XK, XF, XJ, XKR, XFR, XJR, F Type | Land Rover Discovery 4, Range Rover, Range Rover Sport

Oil filter housing removal wrench for difficult to access oil filter covers on Ford Duratorq 2.0L & 2.2L TDCI engines (including Ford Mondeo). Ratcheting crowsfoot design for even faster action.

This wrench is designed to easily wrap around the inlet manifold allows for quick removal of the oil filter cap.

• 27mm | 12 Point
• OEM Equiv: 303-1579
• Applications: 2.0L | 2.2L Duratorq (DW10C / DW12C)