Timing Kits

This timing kit is designed for N13 | N18 1.6L 16V DOHC petrol engines on BMW | BMW Mini vehicles.

The kit locks / aligns the camshafts and crankshaft during the servicing of the timing chain, and other engine repairs.

• Engine codes: N13 | N18
• OEM Equiv: 117440 | 119340

This kit is designed to service balance shaft on Citroen | Peugeot vehicles (and BMW Mini) with 1.4L | 1.6L petrol engines (chain) when the balance shafts have been disturbed.

Also suits BMW vehicles.

• Engine codes: N40 | N42 | N45 | N46 | N46T
• OEM Equiv: 11 4 360 | 115 140 | 11 9 280 | 11 9 330

For 2.0 DOHC 16v | 3.0L DOHC 24v (98-) engines. Used for checking and adjusting timing plus removal and installation of camshaft / variable camshaft timing unit. ALSO suits certain Holden | Land Rover | Rover & MG vehicles.

OEM Equivalents & Engine Codes:

• ET1020A: BMW 11 2 300, Holden KM 813, Land Rover LRT 12-108
• ET1388: BMW 13 5 120, Land Rover LRT 12-119, Holden KM 825
• TT3320: BMW 11 3 320, Holden KM 811, Land Rover LRT 12-112
• TT6322: BMW 11 6 322, Land Rover LRT12-173
• TT6320: BMW 11 6 320
• TT3340: BMW 11 3 340, Land Rover LRT 12-172
• TT5180: BMW 11 5 180, Land Rover 12-227
• TT6080: BMW 11 6 080
• TT3360: BMW 11 3 360, Land Rover LRT 12-115, Holden KM 822
• TT5190: BMW 13 5 190
• TT5120: BMW 13 5 120
• TT5191: BMW 13 5 191
• TT5192: BMW 13 5 192
• M47 | M47TU | M51 | M57 | M57TU

Covers latest range of 2.0 | 3.0 litre common rail diesel engines. Use with ET1441 for inline engine & ET1338 for transverse engine. Also for LAND ROVER Freelander (TD4) / RANGE ROVER (TD6) (00-02) / ROVER: 75 2.0L D (M47R) (99-03) / MG: ZT (M47R).

Specialised kit for the N20 / N26 2.0L petrol engine, for dismantling and assembling the intake and exhaust camshaft. Fixes the camshaft at TDC position.

• Engine codes: N20 | N26
• Use in conjunction with ET1340A for manual transmissions
• Use in conjunction with ET1835A for automatic transmissions

For 1.8L | 2.0L DOHC 16V twin cam Valvetronic petrol engines with chain driven camshafts, to check / adjust engine timing, and align the twin VANOS units. Use with ET1020A & ET1156C (if removing heads).

• Applications: BMW 1.8L | 2.0L DOHC 16V
• Engine codes: N42B16 | N42B20 | N46B20

This timing kit is designed for 1.6L | 2.0L chain driven engines to set the camshaft timing during cam chain removal or replacement (or check / adjust timing). The kit contains the camshaft locking tool; VANOS sensor alignment bar; balancer shaft locking plate; timing chain tensioner retractor & locking pins plus the flywheel locking pin.

• Engine codes: N42B16 | N43B20

A specialised timing kit for locking camshafts / crankshafts in place on BMW diesel engines, as listed below. The kit includes fuel pump sprocket retaining tools as well as a crankshaft turning socket.

• Engine codes: N47 | N47S | N57 | N57S

This kit is designed for 550 | 650 | 750 series | Alpina B7 vehicles with N63 V8 engine.

• Please check the camshaft size carefully. This tool is only suitable when both camshafts are 20mm on the flats.
• If not, and one camshaft is 20mm on the flats / other 25mm on the flats, then you must use ET1593A instead.

A specific timing tool kit for M3 / Z4 BMW vehicles fitted with the S50 / S54 (32 6S 4) chain driven 3.2L 6 Cyl 24V petrol engine.

• Applications: M3 S54 Cabriolet (00-06), Sports Coupe (99-06), CSL Sports Coupe (03-04)
• OEM Equiv: 11 2 300 | 11 5 100 | 11 7 160 | 11 7 342 | 11 9 130 | 119 140 | 11 9 170

A specialised timing kit for BMW M3 petrol engines, for locking the camshafts / crankshafts in position when servicing the timing chain.

Application: M3 (07-13) with E90 | E91 | E92 | E93 chassis
• Engine code: S65B40A
• OEM Equiv: 11 5 290 (11 5 291 | 11 5 292) | 11 5 320 | 11 5 370 | 11 9 970

Locks camshaft & crankshafts on M60 & M62 Vanos & Non Vanos V8 petrol engines. It consists of 2 blocks, swivel lock plates & locking pin for setting camshaft timing. Also suits Range Rover / Land Rover V8 44 8S 2 4.4L (03-05) Single Vanos & Morgan Aero 8 M62 (00-04).