Timing Tools Finder
Engine Code Search
A specialised cylinder head rebuilt kit designed to allow the camshafts to be correctly fitted into the cylinder head on Porsche / VAG common rail engines.
The set contains a jig, various camshaft support fixtures, gear tooth alignment clamps and locking devices.
- OEM Equiv: T40094 | T40095 | T40096
- Applications: VAG 1.6L | 2.0L | 2.7L | 3.0L | 4.0L | 4.2L diesel CR engines | Porsche 3.0 TDi
- For timing servicing on 2.7L - 4.2L engines, also refer ET1622.
Timing chain tension lever designed to be used with the ET0900. Broad range of applications on 1.8L | 2.0L TSFI engines.
For pretensioning the timing chain and unlocking the chain tensioner. Attach to the cylinder head, and then push back the chain tensioning rail. Allows for replacement of timing chain without needing to remove the front cover.
- EA888 Gen III engines (but can also be used with Gen 1 & II)
- Engine codes: 1.8L | CDAA, CDHB, CJEB, 2.0L | CCZA | CCZB | CCZD | CDNB | CESA | CPSA
- OEM Equiv: T40243
- Designed to be used in conjunction with timing kit ET0900
A specialised wrench to hold the pulley while loosening / tightening the pulley fixing bolt. This tool is recommended by the manufacturer to set the No. 1 cylinder at TDC. Covers engines from 2006 onwards.
- Applications: 1.8L | 2.0L TFSi / TSi petrol engines
- OEM Equiv: T10355
A comprehensive / specialised kit for servicing the two part engine support steady bar bush that is fitted to the front subframe of certain VAG models. This kit allows for sealing off the side of the aperture to enable easy extraction / insertion of the bushes, as well as allowing this task to be done without removing the subframe from the vehicle.
A time saving workshop tool.
Designed for V6 4v common rail diesel, chain driven engines. Used for turning over & positioning the crankshaft during removal & installation of the camshaft timing chain. Also contains crankshaft aligning pins (with flats) & side alignment pins for crankshaft to cylinder head.
- Applications: Audi: A4 | A5 | A6 | A8 | Q7 | Allroad, VW: Phaeton | Touareg, Porsche Cayenne
A set ot two cam belt tensioner tools for Volkswagen 4 Cyl TDI PD SOHC diesel engines. Also certain Audi / Skoda applications. These tension tools are designed for Pumpe Duse and Common Rail diesels fitted with larger engine mounting brackets.
- OEM Equiv: T10264 | T10265
An updated comprehensive timing kit for late model belt driven petrol VAG engines. This kit includes an updated camshaft locking tool for post 2013 engines with Cylinder On Demand (COD).
For the camshaft holding kit refer ET1872A.
- Engines: 1.0L 3 Cyl | 1.2L TFSI | 1.4L TFSI / TSI
An upgraded timing tool kit for VAG 1.2L | 1.4L | 1.6L TFSi / FSi engines.
- Applications: Audi A1, Skoda Fabia | Octavia | Roomster, VW Beetle | Golf | Jetta | Polo | Touran
- A DTI gauge (ET1101) is required, but not included in this kit, as most workshops will already have one.
A comprehensive kit for locking the camshaft / crank in their timed position. This allows for the servicing of the camshaft drive chain. Includes guide pins required for aligning the supercharger (on those engines to which it is fitted).
- Engine codes: CBZA | CBZB
- Applications: Audi A1 | VW Beetle, Caddy, Golf, Passat | Skoda Fabia, Rapid, Roomster, Yeti.
Specialised locking tool kit for 5th generation diesel Blue Motion engines. Set includes crankshaft locking tools for both styles of VAG sprockets.
- For Gen 5 common rail diesels (Blue Motion)
- Applications include 1.6L | 2.0L TDi engines fitted to Audi A3 | A4 | A5 | A6 | Q5, VW Golf | Passat | Tiguan
- OEM equiv: T20102 (3359) | T10050 |T10051 | T10052 | T10100 | T10255 | T10264 | T10265 | T40098
A specialised timing tool kit is for 1.8L | 2.0L TSi / TFSi 4v engines. This kit includes a TDC indicator. The TDC indicator needs to be used in conjunction with a DTI gauge. The DTI gauge (ET1101) is not included in the kit, but is available separately.
This kit is designed to allow removal / replacement of the timing chain and camshaft sprockets. The kit includes special camshaft pulley locking blocks for late model Gen 3 TSi / TFSi engines.
On third-generation EA888 1.8 and 2.0L 4V TFSI engines, the ET0037A is required to remove the damper pulley when servicing the timing chain.
A specialised kit designed to lock the camshafts and crankshaft in position when servicing VAG EA888 4 cylinder 1.8L | 2.0L 16V petrol engines (2010-).
- Engines: 1.8L: BYT | CDAA | CDHB | CJEB 2.0L: CABB | CAWA | CAWB | CCZA | CCZB | CCZC | CCZD | CDNB | CDNC | CDND | CESA | CPSA
A comprehensive timing tool kit for belt tensioning a wide range of 1.8L | 2.0L petrol FSi / TFSi engines. The kit includes locking pins, camshaft alignment tool and tensioner wrench.
This kit includes necessary tools for servicing the chain in head and establishing correct valve / camshaft timing.
Applications for Audi A3 | A4 | A6 | S3 | TT
OEM Equivalents & Engine Codes:
- DA0379-23: VAG 3366, VAG T20018, VAG T20044
- ET1020A: BMW 11 2 300, Holden KM 813, Land Rover LRT 12-108
- ET1084-1: VAG T10092
- ET1084-3: VAG T10252
- ET1220B: VAG T10020
- ET2207-3: VAG T10060/A, VAG T40098, VAG T20167, VAG 3204
- TT4001: VAG T40011
- AXW | AXX | BGB | BHZ | BLR | BLX | BLY | BMB | BPJ
- BUL | BVY | BWA | BWE | BYD | BZC | CDLB | CDLC | CDLG
This timing kit has been designed for VAG vehicles with 1.6L | 1.8L turbo chain driven engines from 2003. The kit includes a chain tensioner locking tool, a tensioner locking tool, camshaft alignment tool, and two camshaft / crankshaft pulley holding tools.
- Engine: 1.6L | 1.8L FSI (03-08)
An essential tool for maintaining engine timing whenever the front vibration damper is removed. For instance, when replacing crankshaft oil seals.
Additional tools are required for replacing the engine timing chain (see ET0900 / ET9716).
- Application: 3rd Gen EA888 TFSI engines.
- OEM Equivalent: T10531