Versatile kit with dies for crimping battery cables, balustrading wire, and swaging.

8T hydraulic crimping force for ease of use.

• Die Sizes: 6, 10, 16, 25, 35, 50 & 70mm² Swaging Die
• Overall length: 320mm

Connects to any Power Probe circuit tester, limiting output voltage to 5V. Essential for safely testing sensors and computer circuits on vehicles.

Now you can supply a 5V reference signal to test computer modules, wiring and the components connected to them.

• Current limited 5V output
• Safely test computer sensor circuits
• Provides 5V reference voltage
• 12 - 24V input
• 5V output
• Standard 4mm banana connector

When you need a professional, durable, dependable sprayer. Made in Europe quality...

This unit is ideal for use with brake cleaner / tyre shine (petroleum based only - for silicon refer 124EP15) / diesel / kerosene / Prepsol / Turpentine.

• Viton seals / PA plastic, resistant to most hydrocarbon based solvents
• Viewing stripe with graduated scale
• Innovative pressure release button
• Protective cap to protect the one way return valve
• Stable base
• Large 1.5L tank
• Replacement seal kits available
• Brake Cleaner* excluding CRC Brakleen (due to acetone)
• Tyre shine

The Power Probe TST12V Mini Probe is a 12V cigarette outlet tester designed to quickly check your vehicle's power outlets. It illuminates when power is present, saving time by eliminating the need to search for phone charger cables. This compact and efficient tool is ideal for verifying current flow in accessory sockets.

The Power Probe PPTK0029 is a 20-foot extension cable designed for use with the Power Probe 4 and Maestro diagnostic tools. It extends the reach of your Power Probe, making it ideal for testing electrical circuits on larger vehicles and trailers. This high-quality cable ensures consistent power delivery and secure connections for accurate diagnostics.

The Power Probe PPTK0027 is a 20 foot extension cable for use with Power Probe 3 and 3EZ diagnostic tools. It extends the reach of your Power Probe, making it ideal for testing electrical circuits on larger vehicles and trailers. This high-quality cable ensures consistent power delivery and secure connections for accurate diagnostics.

• 20 foot extension cable
• Original part # PN3049

This clip set allows the Power Probe 3 circuit tester to be powered from any 12V source. Suits all Power Probe 3 models only.

• Original part # PN3046

A Power Probe cigarette adaptor for use with Power Probe 3 | 3S | 3EZ. Allows the Power Probe circuit tester to be powered through the vehicle's cigarette port.

• Original part # PN3048

The original Power Probe 3 uses a 20ft cable which attaches to the vehicle's battery, allowing the user to perform an electrical test anywhere in, or around the vehicle. The PP3 is a Voltmeter and Continuity Tester, with Audible & Visual indicators along with two LED headlights to light up your work area. This circuit tester also supplies Battery Voltage or Ground to activate components. This powerful time-saver tool is perfect for every level of technician.

• Voltmeter and Continuity Tester
• Relay & component tester
• Supply battery voltage and ground to test components
• Audio tone 20' Jumper lead
• Works on 12-24V sources
• Protected by 8 Amp circuit breaker