VAG DSG Clutch Installer

7 Speed
SKU: ET1552A

Automotive


A DSG clutch removal tool set for the safe removal and refitting of twin plate clutches used in VAG 6/7 speed electronically controlled dual clutch manual gearboxes.

For Gen 2 assemblies (2011 onwards), you will also require a shim spacer (ET1552B). To remove the Mechatronic unit refer ET1552C.

  • For 0AM / 08D gearboxes on Golf, A3, Touareg etc
  • OEM Equiv: T10323 | T10373 | T10374 | T10376

T10323

T10373

T10374

T10376

SKU ET1552A
Barcode # 9321280375833
Brand Automotive
Product weight 5.9000kg
Shipping weight 5.900000kg
Vehicle Make VAG

12 Months


You may also like


VAG DSG Gearbox Mounting Lever VAG DSG Gearbox Mounting Lever

VAG DSG Gearbox Mounting Lever

Specialised tool for operating the engaging lever during servicing the mechatronic unit on 7 speed dual clutch gearboxes 0AM.

Removes load from the plungers of the mechatronic unit when inserting the tool between clutch lever and gear housing.

  • Applications: Audi A3 (04-), EOS (06-), Passat (06-), Passat CC (09-), VW Golf (04-).
  • OEM Equiv: T10407

VAG DSG Transmission Spacer

VAG DSG Transmission Spacer

A clutch bearing gauge block for servicing clutches on the 7 speed dual dry clutch transmission.

  • 7 speed DSG transmissions (>2011)


More from this category


Audi Transmission Sensor Module Connector Tool

Audi Transmission Sensor Module Connector Tool

A specialised tool for removing the sensor module connector on 0B5 transmissions (7 speed DCT with wet clutch). To use, simply connect the socket to the housing, turn anti-clockwise, then remove the connector housing.

  • Applications: 0B5 transmissions
  • Vehicles: Audi A4 (08-) | A5 Cabriolet (09-) | Q5 (08-) | A5 Coupe (08-) | A5 Sportback (08-) | A7 Sportback (11-)
  • OEM Equiv: T40228

BMW DCT Clutch Installer

BMW DCT Clutch Installer

A specialised tool to remove / install the dual clutch on GS7D36SG (DKG) transmissions.

  • OEM Equiv: 23 0 400

BMW E90 / E91 Torque Converter Brace

BMW E90 / E91 Torque Converter Brace

For GA6HP19Z / GA6 HP19Z / GA6L45R gearboxes.

  • E90, E91, E92, E93, E70, F20, F21, F22, F23 models, with N51, N52, N55, M57 engines
  • OEM Equiv: 241370 | 83300495486

BMW Mini Clutch Alignment Tool

BMW Mini Clutch Alignment Tool

A specialised clutch alignment tool for installing new clutches in manual transmissions on BMW Mini vehicles.

Designed for use on SAC type clutches where larger tapered tools will not fit.

  • Applications: Mini Cooper JCW/S (11-15) | JCW ALL4/S (11-16)
  • Engines: N18 (1.6L petrol) | N47 (1.6L / 2.0L diesel) with Getrag 6 speed gearbox & SAC type clutch
  • OEM Equiv: 210000 | 83300496779)

BMW SAC Clutch Mandrel Kit

BMW SAC Clutch Mandrel Kit

A specialised kit for centering clutch discs on flywheels when installing self adjusting clutches (SAC). Designed to align the clutch disc before installing a self adjusting clutch.

Also suitable for aligning new / already pretensioned SAC clutches.

Also refer ET1733A

  • Applications: S5D-200G | S5D-250G | S5D-260Z | S5D-310Z | S6S-420G | S6S-560G | GS6-37BZ | GS6-37DZ | GS6-53BZ | GS6-53DZ
  • Sizes: 15mm dia x 23mm | 15mm dia x 26.5mm | 15mm dia x 28mm | 15mm dia x 32.5mm | 15mm dia x 34mm
  • Centering sleeve: 15mm | 32.5mm

BMW SAC Mandrel | 15mm x 26.5mm

BMW SAC Mandrel | 15mm x 26.5mm

A specialised mandrel for centering clutch discs on flywheels when installing self adjusting clutches (SAC). Designed to align the clutch disc before installing a self adjusting clutch.

Also suitable for aligning new / already pretensioned SAC clutches.

  • 15mm diameter x 26.5mm x 60mm (overall length)
  • Suits transmissions: GS6-37BZ | GS6-37DZ