Effective diagnostic tool for determining whether faults are due to the turbo system, or simple air leaks. Simply pressurise using shop air.

The maximum pressure in most turbo systems is approximately 15 PSI - 25 PSI. When connecting the airline to these test caps, always regulate air pressure in the test to 25 PSI maximum. Over pressurisation will damage system components.

A graduated approach to leak testing is recommended. Start with 5 PSI to find large leaks, and progressively increase in 5 PSI increments.

• Kit includes 4 pairs of stepped adaptors to fit most sizes found on passenger vehicles.
• Includes pressure gauge, shut off valve, and pressure release valve.
• Adaptor sizes: 35-90mm

A specialised set of 4 pin lock nut sockets for driving lug lock nuts with external teeth. The kit contains sockets from 20mm - 72mm diameter.

Please refer to the kit components for details of individual sockets.

• 1/2" Sq Drv
• 60mm overall length

Adjustable jaws fit all hexagon (49 - 135mm) & octagon (49 - 143mm) wheel bearing lock nuts. Contains three sets of pins, applicable to any pin holes on the nut.

• 6 Point lock nuts: 1-3/4" - 5-3/4" (49 - 135mm)
• 8 Point lock nuts: 1-3/4" - 5-5/8" (49 - 143mm)
• Pin diameters: 1/4" | 5/16" | 3/8"

A specialised ball joint remover for European trucks. Designed for on vehicle maintenance, and to avoid damage to ball joints and related parts.

Easy to use / save time & money.

• 39mm dia
• Nut width 26mm / Bolt length 128mm
• Applications: > 4 Tonne trucks, including most European trucks
• Special application for MAN 414 drag link.