OTK Style Hose Clamp Kit
280 Pce | With Crimper
SKU: 250OTK-KIT
280 Pce | With Crimper
All common sizes of double ear OTK style clips for easy hose crimping. Side ear pincer plier included.
- 5x7 | 7x9 | 9x11 | 11x13 | 13x15 | 15x18 | 17x20 | 20x23 | 23x26 | 25x28
OTK Style Pincer | Side Ear
A specialised crimper for installing OTK style (double ear) clips where space is restricted.
- Special design side & top join pincer, ideal for use in confined areas.
- Jaw opening (top): 0-23mm | Jaw opening (side): 1-19mm
- 220mm overall length
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Cllp
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip | 23-26mm
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
- 23 - 26mm range
OTK Style Pincer | Side Ear
A specialised crimper for installing OTK style (double ear) clips where space is restricted.
- Special design side & top join pincer, ideal for use in confined areas.
- Jaw opening (top): 0-23mm | Jaw opening (side): 1-19mm
- 220mm overall length
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Cllp
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
OTK Style Clip | 23-26mm
Designed for hose fastening at low and medium pressure, also suitable for metal connections. For correct installation of O Clamps, select the nominal clamp nearest to, but larger than, the outside diameter of the hose or tubing to be clamped. Once you have inserted the fitting close one ear all the way. When the second ear is then closed, the first ear will open slightly. This creates a spring like action which holds against pressure, vibration and hose shrinkage caused by temperature changes or ageing.
NOTE: For additional security, install two O clamps applied cross ways.
- 23 - 26mm range
| SKU | 250OTK-KIT |
| Barcode # | 9321280387478 |
| Brand | Sonsbeek |
| Product weight | 2.2000kg |
| Shipping weight | 2.200000kg |
| Material | Mild Steel |
| Type | OTK Style Clip |
Consumable
Calculate Shipping
Flat Rate Shipping - $16.50
$16.50 flat rate shipping
Manual handling charge for long packaged products - $35.00
Manual handling charge for long packaged products
You may also like
OTK Style Pincer
New style with double setting reaction bar. Pivot geometry requires less clamping effort than traditional pincers.
