Sonsbeek 10" Hold On Chuck
Dual Angled | Sealing
SKU: 3000480
Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.
Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.
Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.
- 10" long
- 1/4" BSP female connector
- Straight chuck to get deeper into the wheel
| SKU | 3000480 |
| Barcode # | 9321280356337 |
| Brand | Sonsbeek |
| Product weight | 0.1900kg |
| Shipping weight | 0.190000kg |
12 Months
More from this category
Ajax 1/4" Female Clip On Chuck
Ajax sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.
Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.
Ajax sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.
- 1/4" BSP female inlet
- Clip On connector
- Sealing type chuck
Chuck Head Assembly
Replacement chuck head assembly for the Sonsbeek 3103000 driveway tyre inflator.
Clip On Chuck
Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.
Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.
Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.
- 6mm hose tail
- Clip on chuck
- Sealing type
Driveway Tyre Inflator Head Repair Kit
A head repair kit for the Sonsbeek 3103000 tyre inflator.
Hold On Chuck
Sonsbeek sealing type tyre chucks are designed to be used when the chuck is to be connected directly to an airline.
Our sealing type chucks have a check valve which seals the air passage when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.
Sonsbeek sealing type chucks are available in a range of different configurations. Where the chuck is to be connected to a tyre inflator, a non-sealing type should be used.
- 1/4" BSP female connection
- Brass construction
Large Bore Clip On Tyre Chuck
Sonsbeek non sealing type tyre chucks are designed to be used when the chuck is to be connected to a tyre inflator / gauged airline.
Our non sealing type chucks will not seal the chuck opening when not in use. When pressurised, it will open the tyre valve core, allowing air from the hose to be transferred to the tyre.
Sonsbeek non sealing type chucks are available in a range of different configurations. Where the chuck is to be connected directly to an airline, a sealing type chuck should be used.
Large bore head is designed for use with earthmoving vehicles.
- 1/4" BSP female connector
- Single straight large bore chuck
- Non sealing type