Silvertronic multimeter leads are made in the UK. Designed for professional use, Silvertronic silicone leads are double insulated.

Silicone leads can withstand high temperature, including the heat of such things as hot manifolds and soldering iron tips.

• 1000V CAT III 20A
• 2m long cables (colour coded)
• Extra thin 0.7mm OD
• Supplied in a 4 pocket test lead organiser for convenient storage.

An essential set of 18 keys for draining sumps, axles, gearboxes, differentials etc. 3/8" Sq Drv.

• Hex: 8, 9, 10, 12, 14, 17mm
• Square: 7, 8, 10, 11, 12, 13, 14mm
• Square: 5/16" (male), 3/8" (male) | 10mm (female)
• Spline (Sec): M16
• Triangular: 10mm

A combination air / hand powered pump for quickly extracting brake fluid, coolant, engine oil, transmission fluid etc. Do not use to extract petrol.

An optional hose to bleed brakes (with brake nipple connector) - ET3586-BRAK is also available.

• Massive 10L capacity avoids the need to remove drain plugs etc
• Supplied with 4 suction tubes (6mm oil | 7mm oil | brake fluid connector | 10mm gear oil)

A professional quality back probe kit from Silvertronic designed for when cable piercing is either not practical or permitted.

Silvertronic leads are made from double insulated Silicone making them both highly flexible, and also highly durable.

• Red / black test leads-right angled plugs (125cm long)
• Back probes - small (0.7mmm OD)
• Back probes - right angled

These reels hold 6 metres of highly flexible double skinned silicone cable suitable for use with standard multimeters.

• 1000V CATIII double / reinforced insulation | 20 Amp current rating
• 4mm Straight plug / 4mm Right angle plug
• Fully compliant to IEC 61010-031:2015

• IEC 1010 rating: 1000V CATIII double / reinforced insulation 20A
• Threaded contact
• 2.0m double insulated silicone cable
• Bi coloured layers

Handy lead set that allows you to plug into the cigarette adaptor to read battery voltage etc.

Compatible with standard multimeter plugs.

A current looper for use with clamp meters for electrical circuit fault diagnosis.

• Suits mini type automotive fuses.
• Inline fuse holder for original fuse.
• For diagnostic testing.

A current looper for use with clamp meters for electrical circuit fault diagnosis.

• Suits standard automotive fuses
• Inline fuse holder for original fuse
• For diagnostic testing

Use with clamp meters for electrical circuit fault diagnosis. An efficient way to monitor amperage draw through a fused circuit

• Inline fuse holder for original fuse

Break into the fuse panel quickly & easily. 4mm banana connectors. For use with standard multimeters.

• Maxi blade fuses
• 20A / 12 - 48V DC measuring range
• +/- 2% accuracy

Break into the fuse panel quickly & easily. 4mm banana connectors.
For use with stanadard multimeters

• Mini blade fuse
• 20A / 12-48V DC measuring range
• +/- 2% accuracy