BMW Primary Chain Tensioner

M52 | M52TU | M54 | M56
SKU: ET1121B-4

Automotive


This chain tensioner tool is for use during installation of cylinder heads or camshafts.

  • Engine codes: M52 (96-99) | M52TU (99-02) | M54 (01-05) | M56 (01-05)
  • OEM Equiv: 11 4 220

11 4 220

BMW Timing Kit

BMW Timing Kit

M52 | M54

SKU: ET1121B

BMW Timing Kit

Suits 2.5L | 3.0L Twin VANOS camshaft setting / locking on chain drive BMW VANOS 6 cylinder engines (98-). Due to the introduction of a Twin Vanos (variable valve control) system on the BMW 6 cyl twin cam chain driven petrol engine Vanos adjustment units fitted to inlet & exhaust camshafts must be reset to align with camshafts when setting engine timing after cam chain replacement. USE with ET1020A, ET1033A & ET1096

  • Series: E36 (99-03) | E38 (90-02) | E39 (98-03) | E46 (08-07) | E53 (99-07) | E65 / E66 (02-05) | E85 / E86 (03-06)
  • Engines: M52 | M54
  • Engine codes: M52B20 | M52B25 | M54B25 | M52B28 | M54B30

BMW Timing Kit

BMW Timing Kit

For setting the timing position on camshaft & crankshaft during belt or chain replacement. The pre-load tool for the primary timing chain tensioner has two threaded nuts M22 x 1.5 (M42 / M60) & M26 x 1.5 (M50 / M52). Also includes locking tools for engines with twin VANOS (VVT) units on BMW M52 (TU) / M54 / M56 essential for dismantling, assembly & timing of the twin VANOS engines plus the VANOS engagement wrench for BMW twin camshaft single VANOS (VVT) unit mounted on the inlet camshaft.

SKU ET1121B-4
Barcode # 9321280359109
Brand Automotive
Vehicle Make BMW

12 Months


More from this category


Automatic Timing Belt Tension Adjuster

Automatic Timing Belt Tension Adjuster

A specialised tool for adjusting camshaft spur belts which have idler pulleys with pin holes. The pin is designed to grip the centre of the idler pulley and rotate it around its off centre retaining bolt.

Applicable to a range of vehicles including Hyundai | Mitsubishi | Volvo.

  • 1/4" Sq Drv
  • Pin diameter: 3/16" (3.0mm)
  • OEM Equiv: 09244-28000 | MD998767 (T40009)

BMW Adjustable Flywheel Holder

BMW Adjustable Flywheel Holder

Used to lock the flywheel in place on a range of late model engines, as well as releasing / tightening down bolts on the vibration damper.

Use in conjunction with ET1517A

  • Applications: M47T2 | M47TU | M57T2 | M57TU | M67 | N45 | N45T | N46 | N46T | N51 | N52 | N53 | N54 | W17
  • OEM Equiv: 11 8 180 | 11 8 182 | 11 8 183

BMW B37 | B38 Crankshaft Front Seal Installer

BMW B37 | B38 Crankshaft Front Seal Installer

A specialised crankshaft oil seal installer to prevent damage when installing new oil seals.

  • Engines: B37C | B37D | B38A | B38B
  • Applications: BMW 1 | 2 | 3 | X1 | X2, BMW MINI Clubman, Countryman
  • OEM equiv: 2 357 900 (2357900)

BMW B38 | B48 Actuator Remover

BMW B38 | B48 Actuator Remover

A specialised camshaft VVT actuator wrench, which is designed to be used when replacing actuator seals, or when the camshaft needs to be removed.

The wrench latches onto the the variable valve timing (VVT) actuators to allow quick / safe removal.

  • Engines: B38 | B48
  • OEM Equiv: 2 360 895 (2360895)

BMW Balance Shaft & Oil Pump Alignment Kit

BMW Balance Shaft & Oil Pump Alignment Kit

Oil pump remover / installer kit for BMW vehicles with N20 2.0L petrol engines. Aligns balance shafts / locks drive sprocket, to allow removal / installation of the oil pump and the balance shaft housing.

  • Use in conjunction with timing kit ET1517A
    • OEM Equiv: 11 4 120 | 2 212 825 | 2 318 177
    • Engine code: N20

    BMW Balance Shaft Alignment Tool

    BMW Balance Shaft Alignment Tool

    Specialised locking tools for balance shafts found in late model BMW and BMW Mini B47 / B48 engines, and N47 engines.

    • Engine codes: B47 | B48 | N47
    • OEM Equiv: 2288054 | 118750 | 118790