PowerProbe Mini Probe

USB
SKU: ETTSTUSB

Easy to use plug-in style current testers.
A simple way to test any USB (especially on car accessory outlets).

SKU ETTSTUSB
Barcode # 9321280401549
Brand PowerProbe

12 Months


More from this category


NEW
Promo
12V / 24V Battery Tester 12V / 24V Battery Tester

12V / 24V Battery Tester

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer

  • Tests all main battery standards
  • Max load voltage tests for 12V / 24V
  • Short circuit / reverse polarity protection

Endeavour 50W Soldering Iron

50W Soldering Iron

Our most powerful unit yet -
now with 50W soldering power -
for the most heavy duty tasks.

  • 10 second fast start
  • 45 minutes continuous runtime
  • 5mm chisel tip / cone tip / heat shrink tip
  • Packaged in plastic case with EVA tray

Air Boy Foam Sprayer

Air Boy Foam Sprayer

1.5L

SKU: 124FS15

Air Boy Foam Sprayer

A high quality, European made, foamer for professional cleaning / car detailing.

  • EPDM seals
  • 110 degree foamer nozzle
  • 1.5 litre tank capacity (recommended to fill to 1L only)
  • Viewing stripe with graduated scale
  • Stable base

Alfa | Fiat Timing Kit

Alfa | Fiat Timing Kit

A specialised timing kit for Fiat's new 1.3L JTD multi jet 16V diesel chain driven engine. This kit contains all necessary tools to check and adjust the camshaft timing, service the cam chain and perform complete engine rebuilds whilst maintaining correct timing.

  • Applications: Alfa Romeo Mito, Fiat 500 | Grande Punto | Punto
  • Engine codes: 169A1.000 | 199A3.000

Carscope Automotive Sensor Simulator

Automotive Sensor Simulator

AutoSim allows a mechanic to simulate the replacement of a sensor.

Simulating output signals of most automotive sensors, AutoSim picks up service issues where a scan tool's diagnosis ends. Sensors tell the on-board computer when something is wrong. AutoSim helps determine if the cause is a faulty sensor, wiring or the ECU.

The product is mainly used for wiring tests. This is because the device can simulate the voltages and check the live data readings on the scan tool to confirm the wiring. You can simulate most sensors from ABS to O2 sensors. Eliminates need to replace non-defective sensors; by the time you have changed a couple of un-needed sensors the device has paid for itself!

  • Voltage simulation range: 0.1V ~ 12V
  • Frequency simulation range: 0.1Hz ~ 10KHz
  • Trigger pulse output: up to 0.15 amperes maximum
  • Output amplitude: 0.2V to 12V output amplitude can be selected at each mode