The ECT3000 Electrical Short and Open Finder makes locating shorts and opens quickly and more accurately than ever before. When the ECT3000 Transmitter is connected to an isolated circuit, it will quickly determine if the circuit has an open or if the circuit is shorted to ground. The ECT3000 receiver is designed to detect signals from the transmitter and its new adjustable distance indicator allows for accurate detection.

• Transmitter quickly determines if circuit has an open or if circuit is shorted to the ground.
• Receiver features a new adjustable distance indicator.
• Light bulb sockets for testing lighting systems. Plus probes / alligator clips.
• Works on 12-24V systems.

Comprehensive kit for quickly & securely connecting into wiring.

• 2 way LED testers Black / red multimeter connector leads
• Male / female round terminal to banana plug
• Male / female flat blade terminal to banana plug
• Variable resistors with banana terminals
• Needle / piercing probes
• Heavy duty alligator clips

Single person operation for quickly / cleanly bleeding brakes. Uses shop air for fast brake bleeding.

• 1.2 litre cannister
• Replenishment kit available separately (124143155)

A professional quality back probe kit from Silvertronic designed for when cable piercing is either not practical or permitted.

Silvertronic leads are made from double insulated Silicone making them both highly flexible, and also highly durable.

• Red / black test leads-right angled plugs (125cm long)
• Back probes - small (0.7mmm OD)
• Back probes - right angled

These reels hold 6 metres of highly flexible double skinned silicone cable suitable for use with standard multimeters.

• 1000V CATIII double / reinforced insulation | 20 Amp current rating
• 4mm Straight plug / 4mm Right angle plug
• Fully compliant to IEC 61010-031:2015

Connects to any Power Probe. Limits output voltage to 5V. Essential for safely testing sensors and computer circuits on vehicles. Now you can supply a 5V reference signal to test computer modules, wiring and the components connected to them.

Perform battery checks, charging system checks, fuse checks, voltage checks, component tests...

All at the flick of the switch, while being guided through with our two NEW menu options: EZLEARNING and EZDIAGNOSTIC.

• New larger LCD screen
• Upside down? No problem! New flip screen feature
• Menu driven. Makes navigating a breeze

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

Monitor battery status on all 12V automotive batteries. Wireless communication (up to 50m) by RF frequency. No need for cables / mobile phone app!

• Solar powered with internal battery (or charge via USB)
• Battery status (SOC / SOH / Voltage) etc. Plus check vehicle starting / charging systems.
• Easy dashboard mount / audible alerts.

This pressure brake bleeder is designed to be portable, being powered by the vehicle's 12V battery. No shop air required!

Features adjustable output pressure up to a maximum 3.0 bar, with automatic cut-off function when pressure falls below 0.5 bar.

Supplied with premium quality adaptor set made from metal, not plastic.

• Suitable for both hydraulic brake and clutch systems.

Single handed brake bleeding. Powered by the vehicle's own battery. No shop air required!

• Bleed pressure is closely controlled up to 3.0 bar - suitable for most vehicles (even those with ABS). Meets European OEM pressure requirements.
• Auto shut off function when pressure falls below 0.5 bar.

A professional quality automotive battery tester for testing both 12V lithium ion and lead acid batteries. This tester uses conductance technology; a passive testing methodology which does not discharge / drain the battery. This analyser also checks the alternator's charging and starter's cranking condition.

• Tests all 12V lithium ion / lead acid batteries for cars / motor cycles.
• Print function via PC printer
• Testing range: Lithium ion 20- 1000CCA | Lead acid 20 - 2000CCA

This petrol engine timing light is designed for professional use. Featuring multiple measurement modes and a rotating barrel for better aim at the timing market and LCD viewing angle.

• Tachometer: 249 to 9,990 RPM (± 1% Accuracy)
• Dwell: 0¡ to 180¡ / 2 - 12 cylinders (±1% Accuracy)
• Voltage: 10 - 16V DC (± 1% Accuracy)
• Advance Degrees (2 / 4 cycle DIS & Conventional): 0¡ to 90¡ ( ± 0.5¡ Accuracy)