A heavy duty diesel injector puller kit for disassembling / removing stuck injectors.
This kit has broad application including Bosch / Delphi injectors.
Includes universal joint to provide better access to hard to reach areas, and an M18 >> 5/8-18 UNF adaptor (to use with standard slide hammers).
- Hex bit sockets: ¿7.6, ¿6.6
- Universal joint: M18 x 1.5
- Special hex sockets: 25mm, 27mm, 29mm, 30mm
- Injector grippers: 12mm, 13.5mm, 16mm, 26mm
- Pull spindles: OT-M14 x 1.5, OT-M16 x 1.5, IT-M16 x 1.0, ITM17x 1.0, IT-M20 x 1.0, IT-M25 x 1.0, IT-M27 x 1.0, OT-M25 x 0.5,OT-M25 x 0.75, OT-M27 x 1
Slide Hammer Swivel Adaptor
This swivel allows access, at an angle, to hard to reach diesel injectors.
- M18 x P1.5 thread
Injector Gripper | 16mm
- 16mm injector gripper
- Application: Fiat Ducato JTD, Citroen C5, Xsara, Jumpy and Jumper HDI and Peugeot 206, 307, 406, Boxer HDI (2.0, 2.2, 2.3I)
Slide Hammer Swivel Adaptor
This swivel allows access, at an angle, to hard to reach diesel injectors.
- M18 x P1.5 thread
Injector Gripper | 16mm
- 16mm injector gripper
- Application: Fiat Ducato JTD, Citroen C5, Xsara, Jumpy and Jumper HDI and Peugeot 206, 307, 406, Boxer HDI (2.0, 2.2, 2.3I)
SKU | ET1905 |
Barcode # | 9321280358249 |
Brand | Automotive |
Product weight | 5.9600kg |
Shipping weight | 5.960000kg |
12 Months
Calculate Shipping
Flat Rate Shipping - $16.50
$16.50 flat rate shipping
Manual handling charge for long packaged products - $35.00
Manual handling charge for long packaged products
You may also like
Slide Hammer Adaptor
This slide hammer adaptor converts from M18 thread to a 5/8-18 UNF thread which is commonly used on slide hammers.
- Supplied with the ET1905 kit which uses an M18 thread.
Slide Hammer Swivel Adaptor
This swivel allows access, at an angle, to hard to reach diesel injectors.
- M18 x P1.5 thread
Others also bought
Locking Wheel Nut Removal Kit
Remove practically all types of lock nuts (INCLUDING those with rotating collars).
Place the supplied disposable key into the chamber and strike. The key will mould to the lock nut shape creating a temporary key to remove the lock nut.
- Creates a lock nut in under 3 minutes
- Includes a shield to protect the wheels from damage.
- Supplied with 3x key cutters (single use). Additional cutters are available separately.
- A real time saving tool!
- Replacement Cutters (5 Pack) ET6066-C5PK
Pneumatic Diesel Injector Removal Kit
Air hammer extractor adaptor for efficiently removing stuck injectors / bushes. Adaptors for removing Bosch / Delphi / Denso injectors, including Bosch solenoid valve Diesel injector and EGR / AGR valves.
Designed to work with any standard air hammer (available separately).
- M25 x 1.0 adaptor | Siemens injectors
- M20 x 1.0 adaptor | Denso injectors
- M27 x 1.0 adaptor | Siemens injectors
- M12 x 1.75 (Int) | High pressure pipe union (on top of injectors)
- M14 x 1.5 (Int) | Delphi injectors 5/8" UNF thread | Universal joint for difficult access
- M17 (Int) / M27 x 1.0 (Ext) | For removing dual connector adaptor on Bosch injectors
- 17mm hex drive / 10mm hex | For removing the internal part of Bosch injectors
More from this category
17T Hydraulic Injector Extractor Kit
A specialised kit that assists with the extraction of very tight fitting injector nozzles, utilising a special pull spindle.
Contains a 17T hydraulic ram, with 15mm stroke. Height retracted 89mm | extended 104mm
- M14 x 1.5 pitch Pulling Spindle 240mm long.
- M14 x 1.5 pitch Pulling Spindle 315mm long.
- M17 x 1.0 pitch Pulling Spindle 240mm long.
- M17 x 1.0 pitch Pulling Spindle 315mm long.
- M18 x 1.5 pitch Pulling Spindle 315mm long.
- M25 x 1.0 pitch Pulling Spindle 240mm long.
BMW Diesel Injector Removal Kit
A specialised kit for removing BMW diesel injectors in vehicles with M47 | M57 engines, without having to remove the cylinder head.
The special extraction bridge and pull spindle allows for quick / safe injector removal.
To avoid the risk of impurities entering the combustion chamber during the cleaning process, we strongly suggest the use of a compressed air adaptor.
- Engine codes: M47TU | M57 | M57TU
- Spindle 16 (one side M17) for mounting in the injector
- 29mm socket for disassembling the electric unit
- Internal 6 Pt wrench for removing the injector needle
BMW N55 Injector Removal Tool
A specialised tool for late model BMW N55 petrol engines to safely / quickly install / remove the fuel injectors. For earlier N55 engines (before July 2013) please refer to ET1593A.
- Application: BMW 3.0L (2008 - 2016)
- Engine: N55 (from July 2013 onwards) - up to engine # 14407684
- OEM equiv: 130270 (13 0 270)
Chrysler Injector Puller
This specialised injector puller is designed to safely extract tightly stuck injectors on Chrysler 2.5L | 2.7L CRD 16 valve VM engines.
Diesel Injection Line Wrench Kit
A specialised kit of diesel injection line wrenches. These open end 12 point crowsfoot sockets are designed for servicing the union nut on high pressure lines on common rail injection engines.
- 14mm | 17mm | 19mm
- 12 point
- 1/2" Sq Drv
Diesel Injector Nozzle Extractor
Designed for removal of the lower components of diesel injectors. This is necessary before beginning a complete injector rebuild.
Injector should be removed from the engine before using this tool. Mount injector securely on a bench before unscrewing the injector solenoid from the injector. For instance, using ET0321.
Do NOT use air tools with this tool.
- Applications: Bosch, Delphi, Denso, Siemens injectors
- Needle head dia: 12.5-13.5mm
- Clamping collar dia: 24mm