Master timing kit containing a wide range of pulley holding / pulling tools for popular Honda, Mazda, Hyundai, Subaru and Daewoo vehicles.
SKU | Description | OEM Equivalent Codes |
---|---|---|
ET1023A |
Holden Water Pump Wrench |
KM 421A J-42492 |
ET1023B |
Holden Water Pump Wrench |
KM 409A KM 472 |
TT0732 |
Camshaft Locking Pin |
303-732 999-7169 07744-0010400 0194-A 11 9 790 09910-05410 49JE02-018 0132-AB 4527-TS2 5711-TD 1 860 617 000 |
TT0462 |
Crankshaft Pulley Holder |
JAB 0010100 |
TT1717 |
Injector Pump Pulley Pin |
18G-1717 LRT-12-141 |
TT9130 |
Auto Tensioner Holder |
14540-913-003 |
TT1719 |
Camshaft Tensioner Pin |
18G 1719 LRT-12-143 |
TT3112 |
Alignment Pin (13 x 112mm) |
|
TT1455 |
Locating Pin 14mm x 55mm |
|
TT2492 |
Water Pump Wrench 40mm |
J42492 |
TT7000 |
Crankshaft Holding Tool |
499977000 |
TT1002 |
Pulley Holder |
49 JE01 002 |
TT1062 |
Crankshaft Assembly Tool |
49 JE01 062 |
TT1050 |
Crankshaft Locking Tool |
49 JE01 050 |
TT8767 |
Tensioning Bolt |
MD998767 09244-28000 9995709 |
TT3376 |
Alignment Plate |
303-376 49 UN30 3376 21-162B 49 JE01 054 |
TT3507 |
Timing Pin |
303-507 21-210 |
ET1681-01 |
Subaru Crankshaft Pulley Holding Wrench |
499977000 |
ET1681-25 |
Honda Crankshaft Holding Tool |
49DO11 102 |
TT0100 |
Balancer Shaft Locking Screw |
07LAG-PT 20100 18G 1671 2 000 018 200 |
TT0200 |
Crankshaft Pulley Holder 50mm |
07 MAB-PY30100 07 JAB-0010200/B |
TT0101 |
Honda 19mm Socket |
JAA 0010100 V19 |
TT2058 |
Flywheel Locking Pin |
LRT 12-058 18G 1523 |
TT3010 |
Crankshaft Pulley Holder 45mm |
07 MAB-PY30100 07 JAB-0010200 |
TT1010 |
Socket 17mm |
JAA 0010100 V17 |
TT1815 |
Camshaft Sprocket Holder |
18G 1521 |
SKU | ET1681 |
Barcode # | 9321280323650 |
Brand | Automotive |
Product weight | 10.2000kg |
Shipping weight | 10.200000kg |
Vehicle Make | Honda |
12 Months
Calculate Shipping
Flat Rate Shipping - $16.50
$16.50 flat rate shipping
Manual handling charge for long packaged products - $35.00
Manual handling charge for long packaged products
More from this category
Land Rover Injection Pump Release Screw
Forcing screws and bolt to remove the fuel injection pump. Use with 303-249-01 & 303-1049 (ET1013L).
- Application: Land Rover Defender (07MY)
Subaru Cam Sprocket Holding Tool
Suits Liberty 2.0L EJ22 engine & V7 & V8 EJ207 engines with intake AVCS. Intake cams only.
Allows for the removal of the AVCS intake cam sprockets without damaging the cam or the sprocket.
- 3 pin circle
- Overall length: 700mm
Subaru Cam Sprocket Tool
Wrench holds the pulley from rotating, then allows the central fixed screw (SOHC cam sprocket) to be extracted. ALSO suits Saab 9-2X linear SOHC engine (05-06) & Baja SOHC engine (04-06)
- Suits Legacy 2200cc engines
- Engine code: EJ22
Subaru Cam Sprocket Wrench
An essential wrench for holding the camshaft pulley when replacing / installing the timing belt. This wrench has two special internal curves for holding the pulley.
This special design will not round out the internal pulley spline.
- Application: Impreza WRX STI (08-)(exhaust cams only)
- OEM Equiv: 499977500
Subaru Camshaft Locking Tool
Locks LHS cam sprockets on 2.0L & 2.5L DOHC Turbo engines. This prevents the cam sprockets from spinning when the timing belt is removed, which otherwise might cause potential valve damage.
Strong magnets hold the tool in place. Curved design for easy viewing of sprocket timing marks. Some engines require 2 plates.
- 2.0L | 2.5L DOHC Turbo engines
- Engine codes: EJ205 | EJ207 | EJ255 | EJ257
- Applications: Subaru Baja | Forester | Legacy | Outback, SAAB 9-2 Aero
Subaru Camshaft Locking Tool
Specialised camshaft locking tool for 2.0L | 2.5L non turbo petrol engines. This tool has a 12 point hex design.
- STi 2.0L EJ20 (02-05) | 2.5L EJ25 (05-14)
- WRX (02-14)