Injector Seal Removal / Installation Tool

SKU: ET1267

Automotive


Injector blowback is a common problem with diesel engines. To remedy this, either a new copper washer needs to be fitted and / or the injector seat needs to be gently refaced before installing a new copper washer.

This tool is designed to easily remove / install copper washers in deep seated injectors.

To remove / install a copper washer, the protrusion of the split collet should be set according to the thickness of the seal to be removed / installed.

  • 7mm ID | 230mm reach
  • For deep seated injector seals

SKU ET1267
Barcode # 9321280327276
Brand Automotive
Product weight 0.5510kg
Shipping weight 0.551000kg

12 Months


You may also like


Replacement Jaw / Screw

Replacement Jaw / Screw

SKU: ET1267-JAW

Replacement Jaw / Screw

Replacement jaw / screw for the ET1267 diesel injector copper washer removal tool.


Others also bought


Promo
Injector Shaft Cleaning Kit

Injector Shaft Cleaning Kit

Cleaning tools for injector shaft / injector pump cleaning, and other similar applications.

Removes carbon deposits which is important when replacing injectors to avoid leaks.

  • Brushes - 2 x 18mm / 2 x 19mm / 2 x 21mm / 2 x 24mm / 2 x 26mm Brushes - 2 x 9mm x 100mm (300mm length)
  • Twisted Wire Brush x 2
  • Flexible Bit Holder x 1
  • Brush Holder with Adapter x 1
  • Mounting Bar
  • Sealing Plugs x 8
  • Plastic Sleeve for Brush


More from this category


Common Rail Injector Screw Removal Kit

Common Rail Injector Screw Removal Kit

Special tools for internal repair of Bosch | Siemens | Denso CR injectors. These tools are designed to remover the injector's internal fittings, and include injector ball valve lapping tools and guide.

  • Injector ball valve lapping tools & guide (3x)
  • 10mm Hex Male x 6.6mm dia Hole Security Insert x 21mm external Hex 1/2" Sq Drv
  • 10mm Hex Male x 7.6mm dia Hole Security Insert x 21mm external Hex 1/2" Sq Drv
  • Denso CR injector valve seat removal tool
  • Bosch CR 16mm injector screw removal socket (8 sided) 1/2" Sq Drv
  • Siemens CR injector internal fixing removal tool

Diesel Injector Flow Tester

Diesel Injector Flow Tester

This return fuel volume tester is for use on the injector return side of a common rail diesel system. Very easy to use - simply take off the return pipe connectors on the injectors and substitute with the fuel lines from this test kit.

  • Measure return fuel flow on common rail injectors
  • Identify worn / blocked / inoperative injectors quickly
  • For diesel vehicles up to 6 cylinders
  • Adaptors for Bosch | Siemens | Denso | Delphi

Diesel Injector Nozzle Tester

Diesel Injector Nozzle Tester

This practical tool helps test diesel injectors for leakage, spray patterns, opening pressure, and leakage between injector needle and injector body.

Suitable for pressure-activated injectors. An electronic switching device (ET6632) is needed for this unit to be able to test common rail type injectors.

  • With transparent tank and two connecting pipes - M12 | M14
  • Pressure range: 0-600 Bar (0-8700 PSI)

Diesel Injector Socket

Diesel Injector Socket

A specialised diesel injector socket commonly used for Nissan / VW vehicles. This injector socket has a cut out window. Part of the Endeavour Tools range of diesel injector sockets.

  • 22mm ID / 32mm OD
  • 12 point (bi-hex)
  • Made from Chrome Vanadium

Diesel Injector Socket Kit

Diesel Injector Socket Kit

This socket set is specially designed for removing diesel injectors, including new style sockets for late model engines including Duratorq on Ford Mondeo / Transit, and those used on late model Land Rovers.

Professional quality chrome moly sockets.

  • 1/2" Sq Drv: 21 x 89mm | 22 x 78mm | 22 x 110mm | 27 x 78mm | 28 x 78mm | 28 x 83mm
  • The 28mm socket features a location collar for 2.4D | 2.5D engines on Alfa Romeo / Land Rover.

Ford Diesel Injector Alignment Tool Ford Diesel Injector Alignment Tool

Ford Diesel Injector Alignment Tool

These tools are essential for holding the injectors in place on Ford Puma engines when tightening the high pressure fuel pipe and injector collar.

This set includes one alignment bar to align two injectors simultaneously, and a second adjustable bar to extend functionality to include 2.0L | 2.2L | 2.4L diesel engines.