Sonsbeek Driveway Tyre Inflator

Analogue | 0 - 138 PSI
SKU: 3103000
$109.00
In Stock

Supply Pressure: Maximum 13.8 BAR, Minimum 6.9 BAR, Recommended clean filtered air

Body Construction: Die cast aluminium with steel operating lever and impact absorbing bumper

Pressure Range: 0-9.6 BAR (0-138lbf/in2) standard

Gauge: Linear with magnifying window

  • Inlet size: 1/4" BSP
  • Measurement range: 0 - 138 PSI

SKU 3103000
Barcode # 9335111004908
Brand Sonsbeek
Shipping weight 1.4000kg
Chuck Type Dual Chuck
Max Working Pressure 138 PSI
Size 1/4"
Thread BSP
Type Tyre Inflator

Consumable


You may also like



Others also bought


Air Boy Driveway Tyre Inflator Air Boy Driveway Tyre Inflator

Driveway Tyre Inflator

The legendary driveway tyre inflator made in the UK for Australian conditions - is now also available in a digital model. This digital model is suitable for inflating truck tyres.

Promo
Brake Bleeder

Brake Bleeder

Pressure Type | Portable

SKU: ETWH505A

$799.00

Brake Bleeder

Tank holds compressed air allowing the unit to be used when disconnected from
the air supply. Suits standard / ABS systems

  • Includes pressure relief / cut off valves
  • Adaptor kit included
  • 6L tank capacity

Promo
Sonsbeek Bar Type Inflator

Bar Type Inflator

10 - 120 PSI

SKU: 310BAR

$79.00

Bar Type Inflator

The Sonsbeek bar style tyre inflator has an aluminium reader bar, making it ideal for inflating / deflating / measuring water filled tyres. These are commonly used on tractors / agricultural vehicles.

This inflator is designed for rugged use, and has a pressed steel lever, as well as a rubber grip on the dual angle hold on chuck.

  • 10 - 120 PSI measurement range
  • 1/4" BSP female connector
  • Dual angle hold on chuck

CV Joint Puller

CV Joint Puller

SKU: ET1850

CV Joint Puller

Ideal for swapping rubber collar or joint. Extra wide frame for large joints

  • Width: 97mm | Dia: 30mm | Length 260mm

CV Boot Band Pliers

CV Boot Band Pliers

With 3/8" Sq Drv for fitting new stainless bands on drive shafts where a torque setting is specified. Suits VW, Audi, Ford, GM etc


More from this category


Air Boy Tyre Inflator

Air Boy Tyre Inflator

Genuine repair / renewal kit for all MK3
/ MK4 inflators. Also compatible with
Jamec TDR2000

Promo
Sonsbeek Bar Type Inflator

Bar Type Inflator

10 - 120 PSI

SKU: 310BAR

$79.00

Bar Type Inflator

The Sonsbeek bar style tyre inflator has an aluminium reader bar, making it ideal for inflating / deflating / measuring water filled tyres. These are commonly used on tractors / agricultural vehicles.

This inflator is designed for rugged use, and has a pressed steel lever, as well as a rubber grip on the dual angle hold on chuck.

  • 10 - 120 PSI measurement range
  • 1/4" BSP female connector
  • Dual angle hold on chuck

Sonsbeek Car Tyre Inflator

Car Tyre Inflator

  • Clip On chuck
  • 0 - 160 PSI measurement range
  • 1/4" NPT female inlet

Sonsbeek Car Tyre Inflator

Car Tyre Inflator

The Sonsbeek car tyre inflator is a professional quality unit designed for inflating / deflating / measuring car tyres. One button operation, with rubber impact protector on the gauge. Ideal for tyre fitters / general trade use.

  • Clip On chuck
  • 0 - 60PSI measurement range. Optimal readying at 30 PSI
  • 1/4" NPT female inlet

Air Boy Driveway Tyre Inflator

Driveway Tyre Inflator

The legendary driveway tyre inflator made in the UK for Australian conditions.