Scan Tools

The MOTO Pro is a full-function scan tool for motorcycles.

Modern motorcycles have complex systems controlling not only the engine, but brakes, transmissions, immobilisers and much more.

The MOTO PRO is designed for professional technicians to access these systems to complete diagnostics, repairs and general maintenance.

The MOTO PRO covers all major manufacturers from Europe, Asia and North America. Including PWC and recreational vehicles, such as ATVs, Jet skis etc.

ALL THIS AND MORE!

• All major motorcycle, recreational vehicle and personal watercraft manufacturers
• Full system coverage
• Read & clear codes
• View live data
• Perform injector tests and self-adaptive resets
• Perform actuator calibrations (inc idle and throttle)
• Rider assist coverage
• Immobiliser coverage
• 8" Android tablet
• Complete connector suite

Coverage from Moto Pro section

The new CanDo OBD Aid allows you to safely check the OBDII DLC port to diagnose exactly what is causing communication errors. It is a fast and easy way to properly check your DLC port prior to scan tool communication or ECU flashing.

Features and Benefits:

• Conduct a safety check on OBDII DLC port prior to connecting your scan tool or flashing ECU
• Constantly monitor the battery voltage with warning beeps in the event of weak battery condition
• Warning beep will alert you when the voltage falls below 12V or when it rises above 15.2V while programming or coding
• Provides a quick check on the alternator charging condition
• Making voltage/frequency measurement at the pins during diagnosis communication with ECU when the engine will not start
• Detection of protocol and data communication during diagnosis and re-flash on the ECU.
• Colored LED lights display when a protocol is detected, grounds and voltage.

Specifications:

• Operating Range: 7.0 ~ 24.0VDC Input
• Maximum Load: Up to 5.0 amps. Output
• Overload Protection: Yes, PTC Fuse
• Monitoring Voltages: Yes, below 12V, higher than 15.2V
• Protocols Detected: PWM(J1850), VPW(J1850), ISO 9141-2, DIS/ISO 14230-4, CANBUS (J-2284)
• OBDII Connector: 88mm length

• 16 pin round connector

The Off Highway Vehicle Pro is the answer for your equipment workshop needing a function packed scan tool for working on Agricultural, Construction, Mining and other Off-highway applications. Diagnose and repair loaders, dozers, street sweepers, excavators as well as many more utility vehicles and equipment.

• Coverage for Caterpillar, John Deere, Volvo, Case and more!
• Access: Engine, Gearbox, Hydraulics, Suspension and other electronic modules
• Perform: Read & Clear Codes, Live Data with Graphing, Resets/ Calibrations, Bi-Directional Controls/Actuations and more depending on the manufacturer and equipment
• 8" IP67 Android Tablet
• 2 Years free updates

12 month subscription update for CanDo Pro Tab scan tools. CanDo Pro Tab scan tools come with an industry leading free update period of 24 months. After this further 12 month updates can be purchased.

CanDo scan tools will continue to operate without subscription updates. CanDo offers an industry leading No Lockout policy.

Replacement 240V charger for CanDo Pro Tab scan tools.

With a Los Angeles, California heritage, CanDo focuses on developing industry leading truck scan tools and code readers. Backed by a world class engineering team, and local Australian technical support, CanDo offers leading coverage of Australian, Asian, European and US trucks, agricultural and construction vehicles. Class leading with extensive heavy / medium / light duty truck coverage, plus OBDII.

PLUS CAT Power Equipment, CAT Construction, CAT Industrial

BIDIRECTIONAL - the only truck code reader with DPF Reset / Regeneration. Don't get stuck in limp mode!

• Access Engine, Transmission & Brakes
• Read/Clear Codes
• Special tests include: I/M Readiness, MIL Status, O2 Sensor Test, On-Board Monitor Test, EVAP System
• DPF Reset & Regeneration for Fuso, Cummins, Detroit, International and Isuzu
• View / Graph Live Data
• Coverage for J1939 / J1587 / J1708 and OBDII Protocols
• 6 | 9 | 16 pin and CAT connectors supplied
• Supports 500K baud rate
• Lifetime free updates
• Full colour

With a Los Angeles, California heritage, CanDo focuses on developing industry leading truck scan tools and code readers. Backed by a world class engineering team, and local Australian technical support, CanDo offers leading coverage of Australian, Asian, European and US trucks, agricultural and construction vehicles. Class leading with extensive heavy / medium / light duty truck coverage, plus OBDII.

PLUS CAT Power Equipment, CAT Construction, CAT Industrial

BIDIRECTIONAL - the only truck code reader with DPF Reset / Regeneration. Don't get stuck in limp mode!

Transform any Smart Phone into a powerful class 4-8 code scanner.

• Access Engine, Transmission & Brakes
• Read/Clear Codes
• Special tests include: I/M Readiness, MIL Status, O2 Sensor Test, On-Board Monitor Test, EVAP System
• DPF Reset & Regeneration for Fuso, Cummins, Detroit, Volvo, International and Isuzu. UPDATED PACCAR and HINO.
• View / Graph Live Data
• Coverage for J1939 / J1587 / J1708 and OBDII Protocols
• 6 | 9 | 16 pin and CAT connectors supplied
• Supports 500K baud rate
• Lifetime free updates
• Same coverage / functionality as HD Code II
• Easy updates via internet
• Easy to use interface
• Bluetooth VCI dongle suits both Android / IOS
• Remote support available with Teamviewer / Screen sharing
• Full PID live datalogging.

OE level functionality for Heavy Duty Truck, Agricultural & Industrial applications.

• Heavy, Medium & Light Duty truck coverage for all major Australia / Asian / European / US manufacturers, including Volvo & Iveco
• J1939 / J1708 and OBDII Protocols covered
• Agriculture / Industrial coverage includes Caterpillar, John Deere, Komatsu.
• Full Mercedes Sprinter coverage
• Perform DPF Regeneration; NOX Resets, Injector Programming, Change and Set Parameters, along with SCR/DEF coverage and full bi-directional controls covering over 60 manufacturers.
• Easy updates via WiFi
• IP65 rating | water resistant
• Remote diagnostics via TeamViewer
• Powerful 1.8GHz quadcore processor
• Includes: Multiple connectors, docking station
• Local Australian support
• Global coverage
• Bus, Commercial, Agriculture, Off Highway
• Free initial remote training consultation post purchase
• Australian based technical support only a phone call away
• We regularly test local Australian vehicles for any updates required
• Regular updates & bug fixes (rather than waiting for bi yearly fixes)
• 2 years free updates for all vehicle categories (a $2,800 value)
• No lock out once updates expire
• 4G Sim Card enabled
• Light Commercial now includes: Toyota Hilux / Landcruiser, Ford Ranger, Nissan Navara / Patrol, Isuzu D-Max, Holden Colorado

Coverage from Commercial to and including DPF regeneration

The CanDo HD TPMS is an activation tool with functionalities specifically designed for the maintenance of trucks and buses. Read sensors in twin wheels and manage up to 22 wheels! The tool is compatible with today's leading truck and bus TPMS sensors and can be updated with new heavy transport vehicles as soon as they are introduced.

• Activates and reads OE sensors in seconds.
• Check tyre pressure to prevent under-inflation.
• Check sensor battery levels to prevent sensor failure.
• Display sensor ID, tyre pressure & temperature, battery status and more!
• Identifies the sensor by vehicle and sensor reference, or simply scan all protocols to activate.
• Fits under the wheel arch
• Manage and store up to 22 wheels.
• Frequent updates.
• 3 years software updates included!

The CanDo range of truck scan tools are supported by an extensive range of specific vehicle connector cables. Core cables are included with the CanDo Pro Tab, and additional to this are a range of optional connectors.

This cable is an optional cable / not supplied with the CanDo Pro Tab.

• Yanmar 6 connector

For Mercedes SDconnect C4 and C5 interfaces with DoIP support. You must have a DoIP enabled C4 / C5 multiplexer - otherwise this cable has no use!

This DoIP OBD2 cable, when used together with a suitable DoIP enabled C4/C5 multiplexer, allows diagnosing and programming the new car audio and video entertainment systems on models like W205, W222 etc.

• For Mercedes SD Connect C4 and C5 interfaces with DoIP support;
• DoIP cable is yellow marked for easy identification;
• Fully compatible with all Mercedes SDconnect C4 and C5 scanners that support DoIP communication protocol;
• Completely replaces the standard OBD2 cable for diagnostics;
• This cable is a must when performing special functions like flashing/programming. For general diagnostics, you can use both OBD2 cables;
• Works on latest Mercedes to year 2020;
• Allows diagnosing and programming the new car audio and video entertainment systems - COMMAND/Audio NTG5, NTG5s1, NTG5s2, NTG5 on cars like W205, W222 etc.
• Recognized by Xentry/Vediamo/DTS Monaco as DoIP and fully supports diagnosis, coding, programming, retrofitting.
• This cable is manufactured in full compliance with the original Mercedes part/order numbers: 6511 2541 99 and HSD 000 000 01 08

A stable power supply is essential when flashing / reprogramming / calibrating ADAS. This unit outputs 100A indefinitely, with variable voltage. Plus functions as a 60A battery charger.

Based in Kansas USA, Clore has a 50 year heritage in developing battery technology for automotive professionals.

• 100A battery stabiliser
• 13.1V - 14.9V (0.1V increments)
• 60A / 40A / 10A battery charging modes
• Extremely low peak to peak ripple voltage
• Adjustable voltage output 13.1~14.9v
• 7-phase battery charging sequence. 60A / 40A/ 10A modes
• No voltage drop
• Quick response time 8x faster than competing models
• Clean, stable power perfect for reprogramming
• 13 Ft Cables
• Winner of Motor Magazine Top 20 Tools award 2020

Coming straight out of the U.S is the Fleetcross Service subscription. The ultimate heavy vehicle workshop assistant! Giving you access to 1,000's of repair procedures, wiring diagrams, diagnostic help, TSB's, Service information and so much more at the touch of your fingers.

Don't get caught without it!

Installed onto any CanDo diagnostic tablet, you get 2 years worth of assistance on Japanese, American and European Trucks.

• All information OEM supplied
• Search for repair procedures via the trouble code
• Guided repair procedures from fault code to predelivery checks
• Service information including lubrication / oil specs and replacement / inspection intervals
• Technical Service Bulletins
• Can be installed on multiple devices (Must be registered on at least 1 CanDo Tablet Scan Tool before being installed on other computers.)
• To arrange a demonstration or if you have any further questions call 1300 137 753

A bluetooth enabled VCI unit for use with the Foxwell GT90Plus scan tool. This new VCI unit is 12V / 24V compatible, and is backward compatible with all versions of the GT90Plus scan tool.

• 12V | 24V compatible
This version is required to scan 24V light vehicles where there is coverage available on the GT90Plus.

Essential service tool for modern workshops / battery service technicians.

Many modern vehicles - especially with start / stop technology and/or regenerative braking - require a specialised tool to associate the new battery with the ECU.

Coverage includes BMW, Ford, PSA, VAG, Volvo

Designed for measuring AC / DC current, including for use with the ET0780 battery tester. Functions include peak value hold, and online monitoring. Equipped with RS232 interface.

• Four digits LCD display
• Sampling rate: 2x
• Clamp size: 30mm x 35mm
• Working current: 10mA
• Frequency: AC 45Hz ~ 400Hz
• Data interface: RS232
• Line voltage: AC 600V

This Foxwell adaptor cable is designed for use with the ET2530 and ET6642 scan tool with ET8000 series adaptors.

• Male - Male
• 15 Pin

This is the standard connector cable supplied with the ET6442 / ET6642.

• Male OBD > Male 15 Pin
• Standard cable supplied with the ET6642

GT90PLUS-AU optional 4G Sim Module.

*Only available with new GT90's. Cannot be retrofitted

Flagship Windows scan tool. A 10.1” tablet - i5 processor – IP67 rated – wireless VCI! Run workshop programs, oscilloscope and J2534 – all on the one tablet! A truly professional diagnostic platform!

• Car PLUS Light truck coverage (Fuso | Hino | Isuzu)
• Auto Scan function for Cars AND Trucks
• J2534 pass through (Drewtech Cardaq-3)
• Bi-Directional actuations
• ECU Coding / Cloning
• Key programming
• Widest coverage of Australian vehicles
• Australian based support
• Wifi connectivity and updates
• Pre / post scan respots
• Lightning fast scanning
• Intuitive new menu design
• 3 years free updates on Foxwell Software

This is the standard connector cable supplied with the GT80 / GT90 scan tools. This cable has an additional input for external power supply input.

• Male - Female
• 15 pin

Comprehensive vehicle coverage with extended functionality on a Windows tablet. All at a competitive price point. Backed by a global team with extensive industry expertise.

• Australian / Asian / European / Japanese / US coverage across cars, vans, 4WDs, light commercial
• Full vehicle scan functionality and special service functions
• Advanced functionality including actuation, bidirectional programming, injector coding
• Windows 10 based / inbuilt wifi (one click updates) on refurbished Panasonic 10" Toughpad
• Bluetooth vehicle connectivity and / or wired
• Current Australian Ford / Holden software
• Australian based support
• 1 Years Free Updates
• Click here for function search

Comprehensive vehicle coverage with extended functionality on a Windows tablet. All at a competitive price point. Backed by a global team with extensive industry expertise.

• Australian / Asian / European / Japanese / US coverage across cars, vans, 4WDs, light commercial
• Full vehicle scan functionality and special service functions
• Advanced functionality including actuation, bidirectional programming, injector coding
• Windows 10 based / inbuilt wifi (one click updates) on refurbished Panasonic 10" Toughpad
• Bluetooth vehicle connectivity and / or wired
• Current Australian Ford / Holden software
• Australian based support
• 3 Years Free Updates
• Click here for function search

Foxwell's newest flagship scan tool! Delivering comprehensive vehicle coverage with extended functionality in our fastest scan tool yet. All at a competitive price point. Backed by a global team with extensive industry expertise.

• Australian / Asian / European / Japanese / US coverage across cars, vans, 4WDs, light commercial
• Full vehicle scan functionality
• Advanced functionality including actuation bidirectional programming, injector coding
• Windows 10 based / inbuilt wifi (one click updates) on refurbished Panasonic 10" Toughpad
• Bluetooth vehicle connectivity and / or wired

All service functions, plus:

• Injector Coding
• Actuation
• Bidirectional programming

Current Australian Ford / Holden software

Local Support

3 Years Free Updates

BUNDLE & SAVE: GT90SCO bundles GT90PLUS-AU and ET0103S

Foxwell's newest flagship scan tool! Delivering comprehensive vehicle coverage with extended functionality in our fastest scan tool yet. All at a competitive price point. Backed by a global team with extensive industry expertise.

• Australian / Asian / European / Japanese / US coverage across cars, vans, 4WDs, light commercial
• Full vehicle scan functionality
• Advanced functionality including actuation bidirectional programming, injector coding
• Windows 10 based / inbuilt wifi (one click updates) on refurbished Panasonic 10" Toughpad
• Bluetooth vehicle connectivity and / or wired

All service functions, plus:

• Injector Coding
• Actuation
• Bidirectional programming

Current Australian Ford / Holden software

Local Support

3 Years Free Updates

BUNDLE & SAVE: GT90PRO bundles GT90PLUS-AU and ETCP3-AU

Foxwell's newest flagship scan tool! Delivering comprehensive vehicle coverage with extended functionality in our fastest scan tool yet. All at a competitive price point. Backed by a global team with extensive industry expertise.

• Australian / Asian / European / Japanese / US coverage across cars, vans, 4WDs, light commercial
• Full vehicle scan functionality
• Advanced functionality including actuation bidirectional programming, injector coding
• Windows 10 based / inbuilt wifi (one click updates) on refurbished Panasonic 10" Toughpad
• Bluetooth vehicle connectivity and / or wired

All service functions, plus:

• Injector Coding
• Actuation
• Bidirectional programming

Current Australian Ford / Holden software

Local Support

3 Years Free Updates

Does not come with any OBDI adaptors only OBDII adaptor

Replacement USB-C cable only, as supplied with the Foxwell i70 scan tool.

The all new Foxwell i70 - a high powered android tablet offering unbeatable value for money. We've now added ABS Bleeding, air / fuel ratio reset, clutch adaptation, fuel pump priming, immobiliser and memory seat matching functions to the already extensive list of service functions. Full vehicle scan functionality (more than just Engine / Gearbox / ABS / SRS). Pre / Post scan reports are now just a click away with inbuilt wifi.

• ABS / Airbag Reset
• ABS Bleeding
• Air / Fuel ratio reset
• Battery Configuration
• Clutch adaptation
• DPF regen / reset
• EPB Service
• Fuel Pump Priming
• Gear Learning
• Immobliser
• Injector Coding
• Memory Seat Matching
• Oil Light Reset
• Steering Angle Sensor
• Throttle Body Alignment
• TPMS
• 7" daylight readable LCD screen
• Android
• Quad Core Processor
• 1GB RAM
• WIFI, micro USB, USB
• 32GB Hard drive
• 5 MP Camera
• 4000 mAh lithium battery
• Australian Ford / Holden Coverage
• Full Engine Scan Functionality
• Enhanced Service Functions
• 2 Year Free Updates
• Click here for function search

Our best value / high powered scan tool has just gotten even better!

We've added a bluetooth VCI for more convenient scanning.

Plus action tests! Perfect for day to day workshop use!

• Quad Core processor
• 7" daylight readable LCD screen
• Full vehicle scan functionality
• All major service functions
• Action tests (NEW!!!)
• 2 years free updates

Android 10.1” tablet | wireless VCI. Full bi-directional diagnostic functions and lightning fast scanning speeds.

• One touch updates – with update notifications
• ECU Coding / Cloning
• Bi-Directional actuations
• Widest coverage of Australian vehicles
• Australian based support
• Wifi connectivity and updates
• Pre / post scan reports
• Lightning fast scanning
• 64Gb storage | 2Gb RAM
• 13MP rear facing camera
• Android 8.1 | ARM A17 4 core processor
• 10,000 mAh battery
• 1 Years Free Updates

Android 10.1” tablet | wireless VCI. Full bi-directional diagnostic functions and lightning fast scanning speeds.

• One touch updates – with update notifications
• ECU Coding / Cloning
• Bi-Directional actuations
• Widest coverage of Australian vehicles
• Australian based support
• Wifi connectivity and updates
• Pre / post scan reports
• Lightning fast scanning
• 64Gb storage | 2Gb RAM
• 13MP rear facing camera
• Android 8.1 | ARM A17 4 core processor
• 10,000 mAh battery
• 3 Years free updates

READY FOR RIGHT TO REPAIR? WE'VE GOT YOU COVERED

The professional choice for flashing. Avoid the risk of lower quality units. Requires Windows based laptop / PC.

Access Drewtech's J2534 toolbox for up to date information, as well as their US based technical support.

BUNDLE WITH THE GT90 FOR A COMPLETE FLASH PROGRAMMING PACKAGE. SAVE 10%

OE level diagnosis - full vehicle scan / full service functions. Ideal for older vehicles where a code reader won't work.

One vehicle brand (eg BMW) supplied free. Additional brands - $190 each.

Advanced functions include bi-directional component actuations and module coding.

• USB updates (no micro SD)
• Free lifetime updates
• Perfect for scanning old OBDI vehicles
• Click here for function search

FoxAssist Update Tool

Choose the manufacturer you need (BMW, Toyota, Holden, etc...) and get the functionality of a full workshop scan tool for that brand!

• Perfect for specialists, car clubs and enthusiasts who want insane coverage for vehicles at a great price!
• Over 50 selectable manufacturers
• Can select up to 5 total brands (circa $100 for each additional brand)
• Full vehicle coverage (Programming, Service functions, special functions)
• Printable Service and Health reports
• Lightning-fast 5" tablet / Wired connection
• Click here for function search

Diagnostic cables for use with laptops. This cable has a female OBD connector for connecting between the scan tool, and a PC.

This cable is NOT suitable for connecting directly to a vehicle's OBD port.

• For Can Bus protocol

Diagnostic cables for use with laptops. This cable has a female OBD connector for connecting between the scan tool, and a PC.

• K + Dcan protocol for BMW