CV Dust Boot Clamp Installer

With Cutter
SKU: ET4040

Automotive

With Ratchet Action / Inbuilt Cutter


Quick ratchet action / inbuilt cutter to fit low profile CV dust boot clamps on most FWD vehicles.

  • Inbuilt cutter
  • Ratcheting action
  • Maximum band capacity: 1mm thick x 10mm wide

SKU ET4040
Barcode # 9321280340589
Brand Automotive
Product weight 0.3700kg
Shipping weight 0.370000kg

12 Months


More from this category


Air Powered CV Boot Install Tool

Air Powered CV Boot Install Tool

This specialised tool installs CV boots without the need to first remove drive shafts from the vehicle, or the CV joint from the drive shaft.

Use with standard shop air. Not suitable for plastic CV boots.

  • Suits CV joint dia: 25-110mm
  • 1/4" BSP air inlet size
  • 72 - 113 PSI working pressure
  • Replacement rubber boot available (ET4151-RB)

Band Type Boot Clamp Tool

Band Type Boot Clamp Tool

Designed for fastening band clamps on CV boots. Crank and handle allows for tension to be kept while tightening the clamps during installation.

Made from quality steel construction with powder coated finish.

  • 10mm (3/8") maximum band width
  • 230mm overall length

BMW CV Output Shaft Kit

BMW CV Output Shaft Kit

A specialised kit for removing / installing seized output CV shafts in wheel hubs. This kit suits many BMW vehicles, but not the E53 X5. For this vehicle, refer ET1253D.

  • Applications: E30 | E31 | E32 | E36 | E39 | E46 | E52 | E53 | E60 | E63 | E64 | E65 | E66 | E67 | E83 | E85 | RR1

BMW CV Output Shaft Kit

BMW CV Output Shaft Kit

A specialised kit for removing / installing seized output CV shafts in wheel hubs.

This kit includes adaptors for the X1 | X3 | X5 | X6.

  • Applications: E30 | E31 | E32 | E36 | E39 | E46 | E52 | E53 | E60 | E63 | E64 | E65 | E66 | E67 | E70 | E71 | E83 | E85 | RR1

BMW Tail Shaft Differential Flange Nut Tool

BMW Tail Shaft Differential Flange Nut Tool

A specialised tool holds the driveshaft connecting nut. This is designed for use with the ET1653A.

  • Engines: N20 | N52 | N54 | N55 | N57 | N63 | S63
  • Series: F10 | F25

CV Boot Band Pliers

CV Boot Band Pliers

With 3/8" Sq Drv for fitting new stainless bands on drive shafts where a torque setting is specified. Suits VW, Audi, Ford, GM etc

  • Suitable for use with a 3/8" torque wrench.
  • Or can be used by hand / with a standard ratchet when no torque is specified
  • OEM equiv: 1682A