This current sensor clamp is designed to test current and leakage of circuits below 600V. A practical unit with compact size, high accuracy and good stability. Supplied with BNC connectors.
- 25mm x 30mm clamp size.
- 0 - 1,000A AC / DC range.
- BNC plugs output interface
- 2m output wire length
- IEC1010-1 | Cat III (600V)
SKU | ET8632 |
Barcode # | 9321280358195 |
Brand | Automotive |
Product weight | 0.2900kg |
Shipping weight | 0.290000kg |
12 Months
Others also bought
Silvertronic Automotive Test Kit
The test lead of choice for professionals. Compatible with all standard multimeters. Made in UK quality.
- Red & black test leads - straight | right angled plugs
- Crocodile clips | cable piercers | back probes
AC / DC 1000A True RMS Clamp Meter
This true RMS clamp meter provides accurate AC, AC/DC Current and Voltage readings regardless of waveforms. This meter can be used in most industrial and commercial applications where non-linear loads distort the Current or Voltage waveform.
- 30mm clamp opening
- 1000A current AC / DC
- 600V voltage AC / DC
- 4000 Digital display counts
- CAT III 600V rating
More from this category
1000V AC / DC Clamp Meter
Professional 600A AC, AC/DC True RMS Clamp Meter with Inrush current. These clamp meters provide fast A/D converting sampling time, high accuracy and all key features for measurement. Features a modern body and jaws design for perfect handhold and tight place testing. A clear backlit display is easy to see and a handy data hold keeps measurements on the display.
- 34mm jaw opening
- 600A current AC / DC
- 1000V voltage AC / DC
- 100ms inrush current
- Non contact voltage function
AC / DC 1000A True RMS Clamp Meter
This true RMS clamp meter provides accurate AC, AC/DC Current and Voltage readings regardless of waveforms. This meter can be used in most industrial and commercial applications where non-linear loads distort the Current or Voltage waveform.
- 30mm clamp opening
- 1000A current AC / DC
- 600V voltage AC / DC
- 4000 Digital display counts
- CAT III 600V rating
Foxwell Digital Clamp Meter
Designed for measuring AC / DC current, including for use with the ET0780 battery tester. Functions include peak value hold, and online monitoring. Equipped with RS232 interface.
- Four digits LCD display
- Sampling rate: 2x
- Clamp size: 30mm x 35mm
- Working current: 10mA
- Frequency: AC 45Hz ~ 400Hz
- Data interface: RS232
- Line voltage: AC 600V
Power Probe Digital Clamp Meter
The Power Probe Digital Clamp Meter is an 80 Amp, auto-ranging clamp meter designed specifically for the automotive technician. This meter is rated CAT III 600V and can measure Volts, Amps, Ohms, Frequency and Temperature, necessary for automotive electrical testing. This meter's diagnostic applications include (but are not limited to) Parasitic Draw, Crank Current testing and HVAC Temperature testing.
Supplied with 3x AAA batteries.
- Voltage: AC 600V | DC 600V
- Current: AC 80A | DC 80A
- Display 4000 counts
- Jaw Opening 24mm/0.9"
- Auto & Manual Ranging
- Auto Power Off / Non-Contact Voltage Detector
- Diode Open Voltage 3.2V
- Continuity Buzzer <50
- Data Hold
- Large LCD Display Backlight
- Work Light
- Low Battery Display