Caution: This cable is designed for Doosan Machinery ONLY. While it shares a 14 pin plug similar to the CanDo 14 Pin Benz Connector ET2608-08, the Doosan application has an inverted ground. Use on early Mercedes Benz vehicles will directly short the supply line to ground. For further information, refer to the Cando Connector companion, or contact [email protected]

This is an OPTIONAL connector, and is not supplied as part of the standard ET2608 kit.

• Applications: Doosan HD only (not Mercedes).
• 14 pin connector
• 38cm overall length

An optional diagnostic cable for the CanDo Pro Tab heavy duty scan tool. This connector features a standard 9 pin diesel connector, but with a connector that can lock onto the diagnostic port to avoid coming loose especially during road tests.

• 9 Pin round connector
• Straight connector, with locking mechanism

An optional diagnostic cable for the CanDo Pro Tab heavy duty scan tool. This connector features a standard 9 pin diesel connector, but with a right angle connector that can lock onto the diagnostic port to avoid coming loose especially during road tests.

• 9 Pin round connector
• Right angle connector, with locking mechanism

Next gen technology! Use App to REMOTELY CONTROL multimeter, log data, graph live data etc. Ideal for hazardous environments, remote measurement (eg trucks) etc. 1000V CAT III

• Battery included

Download the App on the App store

A workshop quality touch control ultrasonic cleaner. Unique dual frequency option for coarser or more intensive cleaning in the one unit.

This model features the following function modes:

Fullwave:

Fullwave mode is a standard cleaning mode based on a single frequency ultrasonic wave. Fullwave (40kHz for intensive clean.

Semiwave:

Semiwave mode is a soft cleaning mode based on a single frequency ultrasonic wave. The wave amplitude is half of the original single frequency. Semiwave (33kHz) for a coarse clean.

Degas mode:

Degas mode circulates periods of the common single frequency ultrasonic cleaning. For example, a pause, sweep, and another pause, making the cleaning liquid generate cavitations. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

Power Sweep:

Power sweep circulates the power of an ultrasonic wave from a low to a high value. This will help peel off or scrub the debris, dirt or contaminants on or inside the material being cleaned.

• Inner dimensions: 330 x 270 x 150mm
• 40kHz frequency
• Drainage tap
• Supplied with metal basket
• Stainless steel tank
• Digital timer
• Digital temperature setting

With a Los Angeles, California heritage, CanDo focuses on developing industry leading truck scan tools and code readers. Backed by a world class engineering team, and local Australian technical support, CanDo offers leading coverage of Australian, Asian, European and US trucks, agricultural and construction vehicles. Class leading with extensive heavy / medium / light duty truck coverage, plus OBDII.

PLUS CAT Power Equipment, CAT Construction, CAT Industrial

BIDIRECTIONAL - the only truck code reader with DPF Reset / Regeneration. Don't get stuck in limp mode!

• Access Engine, Transmission & Brakes
• Read/Clear Codes
• Special tests include: I/M Readiness, MIL Status, O2 Sensor Test, On-Board Monitor Test, EVAP System
• DPF Reset & Regeneration for Fuso, Cummins, Detroit, International and Isuzu
• View / Graph Live Data
• Coverage for J1939 / J1587 / J1708 and OBDII Protocols
• 6 | 9 | 16 pin and CAT connectors supplied
• Supports 500K baud rate
• Lifetime free updates
• Full colour

Test battery charge / health for all 12V auto batteries and alternator / crank systems for 12V / 24V batteries, including new stop start batteries.

Print test results using the built in printer.

• Tests all main battery standards
• Max load voltage tests for 12V / 24V
• Short circuit / reverse polarity protection

Monitor battery status on all 12V automotive batteries. Wireless communication (up to 50m) by RF frequency. No need for cables / mobile phone app!

• Solar powered with internal battery (or charge via USB)
• Battery status (SOC / SOH / Voltage) etc. Plus check vehicle starting / charging systems.
• Easy dashboard mount / audible alerts.

This pressure brake bleeder is designed to be portable, being powered by the vehicle's 12V battery. No shop air required!

Features adjustable output pressure up to a maximum 3.0 bar, with automatic cut-off function when pressure falls below 0.5 bar.

Supplied with premium quality adaptor set made from metal, not plastic.

• Suitable for both hydraulic brake and clutch systems.

Single handed brake bleeding. Powered by the vehicle's own battery. No shop air required!

• Bleed pressure is closely controlled up to 3.0 bar - suitable for most vehicles (even those with ABS). Meets European OEM pressure requirements.
• Auto shut off function when pressure falls below 0.5 bar.

A professional quality automotive battery tester for testing both 12V lithium ion and lead acid batteries. This tester uses conductance technology; a passive testing methodology which does not discharge / drain the battery. This analyser also checks the alternator's charging and starter's cranking condition.

• Tests all 12V lithium ion / lead acid batteries for cars / motor cycles.
• Print function via PC printer
• Testing range: Lithium ion 20- 1000CCA | Lead acid 20 - 2000CCA

This petrol engine timing light is designed for professional use. Featuring multiple measurement modes and a rotating barrel for better aim at the timing market and LCD viewing angle.

• Tachometer: 249 to 9,990 RPM (± 1% Accuracy)
• Dwell: 0¡ to 180¡ / 2 - 12 cylinders (±1% Accuracy)
• Voltage: 10 - 16V DC (± 1% Accuracy)
• Advance Degrees (2 / 4 cycle DIS & Conventional): 0¡ to 90¡ ( ± 0.5¡ Accuracy)