Replacement soda blasting media for the Air Boy soda blaster. Soda blasting media is pure NAHCO3 (baking soda), with particle size optimised for soda blasting.

• 5kg container
• Always use P2 respiratory protection
• Sodium Bicarbonate dissolves in water. Avoid inhaling dust.

Soda blasting is a fast and gentle method of removing paint, carbon, surface rust etc. It neither warms up / stretches sheet metal, and does not damage glass, rubber or plastic.

The soda media is environmentally friendly. It is not dangerous but may be harmful if inhaled as dust. So always use P2 respiratory protection, hearing protection, and eye and facemask when blasting.

Use with air compressors with at least a 450 litre air / min rating, and always use a water trap. Replacement soda media is available.

• Precision nozzle requiring no manual adjustment
• Optional wide nozzles available for faster blasting
• Soda is environmentally friendly

This true RMS clamp meter provides accurate AC, AC/DC Current and Voltage readings regardless of waveforms. This meter can be used in most industrial and commercial applications where non-linear loads distort the Current or Voltage waveform.

• 30mm clamp opening
• 1000A current AC / DC
• 600V voltage AC / DC
• 4000 Digital display counts
• CAT III 600V rating

Our most powerful 12V jump starter, suitable even the largest SUVs / 4WDs. Extra grunt for the most demanding jump start applications!

New design includes updated USB-C fast charging port, plus USB-A / 12V cigarette ports. Conveniently charge using standard USB-C cable (charger not included).

This kit also inclides a memory saver cable to preserve vehicle memory when changing automotive batteries. Avoid losing radio settings etc.

• Up to 8L diesel!
• A must have for professional workshops.
• USB-A | USB-C | 12V DC outputs.
• 1400 Peak CCA
• 20,000 mAh battery
• Memory saver cable included
• Fast, convenient charging using type C cable

Slim, compact 10W COB light that shines brighter & lasts longer. Magnetic ends rotate for easy placement. Plus swiveling hooks. Light rotates 360 degrees to direct the beam onto the job, as required.

• 2600mAh lithium battery with fast Type C charging.
• Adjustable intensity with a run time up to 5 hours.

A metal body tool for accurately measuring brake disc thickness without needing to remove the wheel. Suitable for use on most motorcycles, cars and commercial vehicles.

• 0 - 45mm range
• Metric scale with 1mm graduations
• Spring action plunger, for quick operation

Brake disc measurement tool, that fits easily on most vernier calipers (not supplied). No need to remove the wheels or strip the brake first.

A time saving tool!

• Measures brake disc thickness with wheels still on vehicle
• Quote accurately, without stripping brakes / removing tyres

Accurately measure brake disc diameter without removing wheels. Quick identification of the brake system. Saves time!

• Suits most passenger / light commercial vehicles
• Range: 200 - 400mm
• Reach: 265mm

A specialised brake wear gauge for use on heavy vehicles to check the thickness of remaining brake pad material.

An offset design allows for the blades to be inserted between the brake disc and the brake pad backing plate so that the pad thickness can be measured without the pad needing to be removed from the vehicle.

• 9 blades marked in both metric & imperial units. Range: 6 - 22mm (0.2362" - 0.8661").
• Always consult manufacturer's recommended measurements for brake pad replacement; many duty manufacturers recommend pad replacement at around 5mm.

Quickly / simply measure trending brake thickness without removing any components.

Place the end of this lightweight gauge against the brake disc surface; slide back the measuring peg until it stops against the back plate of the brake pad. Read off the thickness of the pad material in mm.

• Colour coded green | yellow | red traffic-light symbol as to whether you need to replace the brake pads.
• Made from lightweight aluminium.

An updated / improved version of traditional brake rotor gauge kits.

This model uses a clamping system for universal application. On late model vehicles, the clamp points are not necessarily ferrous metal, meaning that traditional magnetic clamping fixtures are no longer suitable.

Ideal for checking tyre / wheel run-out. And also measuring the brake disc / brake hub.

• Measuring range: 0-10mm
• Graduations: 0.01mm
• Aluminium clamping range: 20 - 100mm