BMW Timing Kit

N62 | N62TU | N72 Camcarrier Set
SKU: ET1136B


For securing inlet camshaft during installation in bearing bridge.

Barcode # 9321280329126
Brand Automotive
Vehicle Make BMW

12 Months

Others also bought

Crowsfoot Wrench Set

Crowsfoot Wrench Set

  • 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1"

BMW Timing Kit BMW Timing Kit

BMW Timing Kit

Locks camshaft & crankshafts on M60 & M62 Vanos & Non Vanos V8 petrol engines. It consists of 2 blocks, swivel lock plates & locking pin for setting camshaft timing. Also suits Range Rover / Land Rover V8 44 8S 2 4.4L (03-05) Single Vanos & Morgan Aero 8 M62 (00-04).

BMW Rigid Chain Tensioner

BMW Rigid Chain Tensioner

Rigid primary chain pre- tensioner for late model new generation engines (short format), including N12 | N14 | N40 | N42 | N46 | N52. Two required for BMW V8 engines. Also suitable for BMW Mini 1.4L, 1.6L 16v N12- N14 engines & Peugeot 207, 308 Citroen C4 (EP6, EP6 DT / DTS & EP3). Use with ET1188B for N52 Cam alignment & ET1300 N14 / R56 Kit.

Cup Style Oil Filter Wrench Cup Style Oil Filter Wrench

Cup Style Oil Filter Wrench

Cup style oil filter wrench that suits BMW | Mercedes along with many other vehicles.

  • 74mm x 14 flutes.
  • Suitable for Purflux | Grove / Mann & Knecht filters fitted to: BMW | Citroen | Peugeot | Ford | Fiat | Holden | Mazda | Mercedes | Nissan | Porsche | Renault | Suzuki | Toyota | VAG.
  • Applications: Mercedes 2.2L CDI (M102 | M103 | M104 | M110 | M111 | M119 | M120 | M613 | Sprinter 2.2L Turbo (2006 onwards)
  • 1/2" Sq Drv (do not exceed 25Nm) | 27mm wrench

CanDo MLT Pro CanDo MLT Pro

CanDo MLT Pro

For the ULTIMATE level of functionality on Japanese Medium / Light trucks and Sprinter / Iveco Vans.

The ALL NEW MLT PRO has you covered for vehicles up to 26,000 GVM - with Bi-directional controls, full Truck scan functionality,Allison / Eaton Transmission coverage, ABS coverage and much more. Don't overpay for a tool that covers vehicles you don't need - Get more functionality for the vehicles you work on!

  • 2 Years Free Updates
  • Full Bi-directional Controls
  • DPF Resets & Regens (Aftertreatment Leak Test)
  • Injector Coding
  • EGR Reset on Medium Trucks
  • Turbo Charger Calibration & Activation (Required for Turbo Replacement)
  • VGT Electronic Actuator Installation & Calibration
  • Maintenance Resets
  • Cylinder Performance test
  • SCR Performance test

LIGHT / MEDIUM TRUCK: Mitsubishi FUSO, Isuzu, Hino, UD, Freightliner

COMMERCIAL VANS: Mercedes Sprinter, Iveco Daily

AMERICAN PICK UPS: Dodge Ram, Ford F-Series and Chevy Silverado

TRANSMISSION: Allison / Eaton

HEAVY TRUCK: All J1939/J1708 Protocols for Read/Clear Code and Live Data

ABS: Wabco / Bendix / Wabash

OBDII GENERIC: Read/Clear Codes and Live DataStream W/ Graphing

  • 6PIN / 9PIN
  • 16PIN
  • Isuzu 3PIN



  • Free initial remote training consultation
    post purchase
  • Australian based technical support only a phone call away
  • We regularly test

More from this category

BMW | BMW Mini Timing Kit

BMW | BMW Mini Timing Kit

This timing kit is designed for N13 | N18 1.6L 16V DOHC petrol engines on BMW | BMW Mini vehicles.

The kit locks / aligns the camshafts and crankshaft during the servicing of the timing chain, and other engine repairs.

BMW Camshaft Locking Kit

BMW Camshaft Locking Kit

The 2.5L & 3.0L 6 cylinder twin camshaft 16 valve petrol engine (04-) are widely used in BMW 3 & 5 series vehicles. There are 2 types of engines within the range, VALVETRONIC & Direct injection engines, but all have VANOS variable valve timing units on both the inlet & exhaust camshafts. USE with ET1136-5.

BMW Timing Kit

BMW Timing Kit

This kit is designed to service Citroen | Peugeot vehicles (and BMW Mini) with 1.4L | 1.6L petrol engines (chain).

Also suits certain BMW vehicles.

BMW Timing Kit BMW Timing Kit

BMW Timing Kit

N20 | N26

SKU: ET1517A

BMW Timing Kit

Specialised kit for the N20 / N26 engine, for dismantling and assembling the intake and exhaust camshaft. Fixes the camshaft at TDC position.

  • Engine codes: N20 / N26