Workshop Tools

Heavy duty bar which provides support during engine repairs. Heavy duty rubber supports avoid damage to paintwork, while providing anti-slip stability.

• 500kg capacity
• Range: 520 - 1500mm

This engine stabiliser bar is made from robust 50mm square tube, and extends to 1,830mm. Rubber pads on the main bar protect against paint damage. A second bar provides support to prevent the engine from toppling over. This bar extends to 845mm.

• This support brace can be used with / without the third leg.

Specialised engine stabiliser bar for supporting the engine during gearbox removal on VW Transporter (04-) and T5. The bar extends from 578mm to 1830mm.

• Also suitable for use on other makes / models given adjustable supporting seats, two hooks / chains, and extended base.
• OEM Equiv: 10-222A/23

Replacement seals for ET1797 fluid transfer syringe. These EPDM seals are compatible with brake fluid, and are the same seals as supplied with the original unit.

For oil, use NBR seals (ET1797-NBR)

• Suitable for use with brake fluid
• 2 piece set

EPDM seals for ET1798 fluid transfer syringe. These EPDM seals are compatible with brake fluid. These are different seals to the standard seals supplied with the ET1798 syringe.

For oil, use NBR seals (ET1798-NBR)

• Compatible with brake fluid
• 2 piece set

Blades: 100 13mm

• Size: 0.008" | 0.010" | 0.012" | 0.013" | 0.014" | 0.015" | 0.016" | 0.018" | 0.019" | 0.020" | 0.025" | 0.026"

Feeler gauge with 22 straight steel blades and dual metric / imperial measurement. Sizes 0.04 to 0.88mm (.0015" to .035") plus extra .010" brass blade. Blades are 85mm long x 13mm wide.

• Size: .0015" | .002" | .0025" | .003" | .004" | .005" | .006" | .007" | .008" | .009" | .010" | .011" | .012" | .013" | .014" | .015" | .016" | .017" | .018" | .019" | .020" | .021" | .022" | .023" | .024" | .025" | .026" | .028" | .030" | .032" | .035" with .010" brass blade

A professional quality metric flare nut crowsfoot wrench set. Made from drop forged chrome moly steel.

• 15 piece
• 3/8" Sq Drv: 8mm - 19mm
• 1/2" Sq Drv: 21, 22, 24mm

High quality flexible breaker bar made from heat treated drop forged CrV steel, with a corrosion resistant mirror chrome finish.

180 degree rotating head. Replacement heads available.

• 1/2" Sq Drv
• 24" (600mm) overall length

High quality flexible breaker bar made from heat treated drop forged CrV steel, with a corrosion resistant mirror chrome finish.

180 degree rotating head. Replacement heads available.

• 1/2" Sq Drv
• 30" (750mm) overall length

This funnel can be molded into different shapes making it ideal to drain hard to reach oil filters.

This size is ideal for use with passenger vehicles. A larger size is available which is more suited for larger vehicles (ET7268).

• Suitable for use with engine oil, brake fluid, ATF and coolant
• Size: 170mm x 372mm

This funnel can be molded into different shapes making it ideal to drain hard to reach oil filters.

This size is ideal for use with larger vehicles. A smaller size is available which is more suited for passenger cars (ET7267).

• Suitable for use with engine oil, brake fluid, ATF and coolant
• Size: 205mm x 556mm

A multipurpose fluid syringe ideal for the transfer of brake fluid, and other fluids from components such as differentials / gearboxes.

This syringe is fitted with EPDM seals which are designed for brake fluid. NBR seals are available as an option for oil transfer.

We supply these syringes with a BONUS wall mount.

• 200ml capacity
• Robust plastic construction
• Transparent design
• Dual seals

• Short stroke lever action.
• Suits standard 16oz cartridge / bulk filling.

Foldable design for narrow workplaces. Adjustable light intensity and magnetic top (pick up tool).

• 4W COB worklight / 2W SMD spotlight
• Type C fast charging. Charge indicated by 4 LEDs

Our new Super SLIM worklight!

A unique ball joint knuckle delivers 360¡ rotation.

Powerful COB LEDs deliver up to 600 Lumen with an intensity control dial.

What more can you want from a torch!

• Top torch
• Main light
• Top torch ON/OFF switch
• Micro USB charging port protected
• Adjustable intensity control switch for worklight
• 360º rotation
• Strong magnet for hands free use

All-in-one flashlight, laser pointing & UV light.

Head pivots 90 degrees.

Rear magnet plus pocket clip.

5W LED

Innovative dual 3W COB Floodlight / 4W LED spotlight, with Ôno hands' sensor activation. Either wide beam / narrow beam!

• Adjustable light intensity
• Light can be detached, or rotated up to 60°

Check out these features:

• A powerful magnet for hands free use.
• 270 degrees rotation.
• IP67 waterproof rated.
• Up to 4 hours runtime.
• Amber safety blinker mode.
• Topped off by simple USB charging.
• 6,600 mAh battery

Compact design with magnetic base.

6 LEDs deliver 1000 Lumen, with a powerful 6,600 mAh battery.

Simple USB recharging.

Adjustable light intensity, together with UV light / laser pointer

• 450 lumen main light
• Charge via USB-C cable
• 365nm UV light

Adjustable 5W SMD 500 lumen light.

Memory function retains light intensity.

Pocket clip.

Next gen rechargeable pump for transferring a wide variety of workshop fluids, including DEF / Adblue.

• 2900mAh lithium battery can discharge up to 300 litres. Recharge using USB cable.
• Adjustable telescopic suction tube (380-520mm)
• Suitable fluids include Antifreeze, Windshield fluid, Kero, Diesel, AdBlue & oils (up to ISO 32). Do not use with Acids, Acetone, Petrol.

Three-in-one USB rechargeable 300 Lumen flashlight, laser pointer & UV light.

• Rear magnet plus pocket clip
• Multiple output modes: High / Medium / Low Intensity, UV Light & Laser
• 2,600mAh rechargeable battery (Type C fast charge)
• Head pivots 90 degrees

Innovative 360¡ swivel & tilt design, using a unique ball joint design. Two magnets on back / one on bottom for hands free usage.

Simple USB charging.

7 SMD's generate 400 Lumen

• Twin magnets on rear
• Magnetic base
• USB charging
• Top light

Ultra bright 500 Lumen worklight, with high quality Bluetooth speaker. Also use as a Powerbank to charge phones.

• Intensity control (real time display of lumen / battery %)
• 180° swivelling stand with strong magnet
• Impact & water resistant
• Fast Type C USB charging
• 2400mAh battery
• See video

• 30kg load capacity
• 420 x 260 x 300mm

Flexible telescopic design. Magnetic end to pick up small metal parts.

• Adjustable focus
• Integrated pocket clip
• Magnetic base
• Rechargeable 450mAh battery

An easy and safe solution for transferring fluids, especially media which is unsafe for body contact. Draws in & pumps out liquid in a single stroke.

Ideal for fuel oils, mineral oils, synthetic & biological oils, cooling liquids and spirits.

• Rugged aluminium die cast head
• NBR seals (not suitable for use with brake fluid)
• 450ml transfer container
• Supplied with 8 foot of vinyl hose (4 foot with each valve)

Super bright 1000 lumen!

Aluminium body with 3 lights that can be individually rotated up to 40 degrees.

1.2m - 1.76m expandable length to suit even the largest SUVs. Soft pads to avoid scratching

Simple USB recharging.

Slim, compact 10W COB light that shines brighter & lasts longer. Magnetic ends rotate for easy placement. Plus swiveling hooks. Light rotates 360 degrees to direct the beam onto the job, as required.

• 2600mAh lithium battery with fast Type C charging.
• Adjustable intensity with a run time up to 5 hours.

Harmonic balancer puller & installer kit for easily servicing harmonic balancers and drive pulleys which are press fitted onto the crankshaft. The kit includes a range of metric / imperial bolts & adaptors.

• Heavy duty 3/4" diameter forcing screw internally threaded to fit adaptors.
• Adaptors: 7/16", 1//2", 9/16", 5/8", 3/4" UNF, 12 x 1.5mm, 14 x 1.5mm and 16 x 2.0mm.

For balancer, pulley, gear & flywheel. Drop forged 4-slot yoke and a variety of cap bolts and forcing screw tips make this set universal.

• Includes 5/16" | 3/8" | M8 bolts.
• Do NOT use with impact wrenches.

A heavy duty mechanical / hydraulic hub puller kit for various stud patterns up to five studs. The individual legs, on a raised yoke assembly, allows for quick attachment to vehicle hubs.

• Includes heavy duty striking handle
• 190mm reach
• 10 Tonne hydraulic ram

A handly clamping tool that can completely or partially closes brake or fuel lines with adjustable locking collar.

• Rounded jaws avoid damage to hoses
• Ring lock holds plier in desired position.
• Hose capacity: 5 - 12mm
• Jaw width: 6mm | Jaw opening: 0 - 14mm
• 165mm overall length

Special radius jaws will not damage internal hose lining. Small size for brake / fuel lines. Medium size for vacuum, radiator hoses etc.

• 2 Pce set

Simple / effective hose pincher clamps suitable for use on brake / fuel / vacuum lines. Wing nut / screw allow for variable adjustment to restrict flow to the extent required.

• 22mm clamping range
• 2 Pce set