Truck Tools

For disassembly of the main drive shaft flange on Scania vehicles.

• 72mm ID / 80mm OD
• 3/4" Sq Drv

A specialised socket for dismantling the front / rear wheel axle cover on Volvo / Scania trucks. Part of the Endeavour range of specialised truck tools.

• Size: 115mm dia
• Flutes: 8 point
• Drive: 3/4" Sq Drv

A specialised kit for removing / installing spring eye bushes on European trucks.

Many European truck brands have designed special spring eye bushes, as a consequence requiring special tools to be used for their servicing. This master kit suits a range of MAN / Renault / Volvo trucks. Optional adaptors available for DAF vehicles.

Supplied with a 12T hydraulic ram. This unit requires a hydraulic pump to operate (which is not supplied).

• Applications: MAN (410 / 414 / 460) | Renault (340 / 450 / 460) | Volvo (FM12)

A specialised kit to remove / install the spring pin on Japanese / European trucks. The 7T hydraulic ram makes removal significantly easier. A time / money saving kit!

• Components 4-7, 9-11 suitable for Scania | Volvo trucks
• Components B4, B6-14 suitable for Fuso | Isuzu | Toyota medium sized wagons & pick ups
• Optional accessory: ET1129B hydraulic hand pump

A specialised kit for Fuso | Hino | Isuzu | Nissan diesel trucks. An optional adaptor is available for US trucks.

The kit includes all bushing adaptors and sleeves needed for removal / installation of bushes fitted to truck torque rod arms. Plus a hydraulic pump with 30T hydraulic ram.

A handy tool for driving brake rivets on trucks / tractors.

Simply secure the riveting jig in a vice. Select the appropriate punch size and anvil to suit the brake rivet. Hold the brake shoe and lining in one hand, and then fasten the rivet using a hammer.

Also suitable for older cars fitted with rivetted brake linings.

• 8mm | 11mm roll punches
• Star punch

Specialty impact socket to loosen truck cage bolt to unlock air brakes PLUS remove air brake booster.

• 19mm | 6 point
• 163mm overall length
• 1/2" Sq Drv

Specialised disassembly kits for removing pneumatic quick fittings from nylon / rubber hoses.

• Applications: Volvo | UD | DAF | Scania | Hino | Fuso
• Sizes: 6 | 8 | 10 | 12 | 14 | 16mm
• OEM Equiv: Volvo 88800414

A time saving tool for removing ball joints in tie rod ends, drag links, relays rods etc, especially Japanese trucks over 4 tons.

Please ensure that the ball joint dimensions match this tool. Always grease the central bolt before removing the ball joint. The central bolt is a consumable item. Please make sure to replace it once the thread starts to wear.

• Suits Japanese trucks over 4 tons
• 39mm diameter

This is a larger capacity bearing packer designed for trucks, tractors etc.

• For bearings up to 6-1/2" OD.
• Metal cones

A specially designed kit for trucks / SUVs with inaccessible wrench flats on inner tie rods.

The kit includes four crowsfoot adaptors to fit multiple applications. The long socket is designed to fit over the tie rod end, with the crowsfoot engaging on the lock socket.

• Crowsfoot adaptors: 1-7/16", 33.6mm, 38.4mm, 42mm

Larger size pliers to safely remove chrome plated lug nut caps on trucks / trailers.

With specially designed jaws that firmly grip the caps.

• 250mm overall length

A heavy duty adjustable oil filter wrench suitable for use on a wide range of commercial vehicles.

• 70 - 138mm range
• 1/2" Sq Drv

This truck oil chain filter wrench has a head design that allows you to turn in either direction without removing the wrench.

• 24" chain length
Fits diameter: 75 - 150mm

This heavy duty strap wrench can grip any filter up to 12" (300mm) diameter, making it ideal for use with both car / truck filters.

• The support pad helps grip the filter without crushing it.
• The more leverage applied the tighter this wrench grips.
• Use with any 1/2" Sq Drv power bar.
• Capacity: 0 - 12" (0 - 300mm).

This kit is designed for testing truck cooling systems. The kit includes seven adaptors that suit larger radiators found on trucks, construction equipment etc. A gauge / pump is also included.

• Mercedes / Deutz radiator adaptor
• Volvo radiator adaptor (M45 x 3.0)
• MAN radiator adaptor (M52 x 3.0)
• DAF / IVECO radiator adaptor (M45 x 4.0)
• DAF / ERF radiator adaptor (M72 x 4.0)
• Renault radiator adaptor (M42 x 3.0)
• Scania radiator adaptor (M62 x 4.0)

This kit is designed for testing truck cooling systems. The kit includes four tapered adaptors that suit larger radiators found on trucks, construction equipment etc. A gauge / pump is also included.

• Suitable for American | European | Japanese style adaptors
• Tapered adaptors: 17-35mm | 26.5-41mm | 37-50mm | 47-60mm
• Gauge / pump: 0-35 PSI (0-2.5 Bar)

This kit includes a powerful 17 tons hydraulic cylinder to help remove / install stuck truck spring pins easily and safely. The hydraulic cylinder features a special non threaded design so that the screw can be quickly turned in, and fixed on the cylinder.

• Applications: Scania | Volvo, and Fuso | Isuzu | Toyota (medium sized wagon and pick ups)
• Optional accessory: ET1129B hydraulic hand pump

Twist sockets for removing damaged / rusted on truck hub nut sockets.

These twist sockets are for removal only, and will damage the wheel nut being removed. These twist sockets should NOT be used with air powered impact wrenches.

• Sizes: 28 | 30 | 32 | 33 | 34 | 36mm
• 1/2" Sq Drv

Effective diagnostic tool for determining whether faults are due to the turbo system, or simple air leaks.

• Includes 3 pairs of stepped adaptors to fit most sizes found on commercial vehicles.
• Includes pressure gauge, shut off valve, and pressure release valve.
• Adaptor sizes: 105 - 130mm

An extra heavy duty puller for disassembling even the most seized U joints in minutes on virtually all heavy duty commercial vehicles.

This puller is engineered to be used with 1" Sq Drv impact tools. Reduces the risk of damage to driveshafts, yokes, joints and bearing cups.

To use, simply remove all bolts from the bearing cup. Slide the puller over the drive line yoke. Turn forcing screw clockwise with impact wrench.

• Application: U-Joints with bearing cups 1-1/2" - 2.2" OD.
• Ensure forcing screw is always lubricated.

A specialised cranshaft rear oil seal installation tool for UD 17T trucks. Makes the installation process quick & easy, while avoiding damage to the oil seal.

• Applications: UD truck 17 Ton (96-11), FE6TB | FE6TC
• Suits genuine oil seal: BZ6273E

A specialised kit for removing the cylinder liner on Caterpillar, Cummins, Mercedes OM460 and Volvo D13 engines.

• Spring loaded arms adjust to fit the liner automatically.
• For cylinder liners up to 15" deep.

A real time saving tool! A master wheel hub extractor for Japanese trucks (Fuso, Hino etc) and also European trucks such as Scania, Sauer and BPW.

• Adjustable for bolt diameters from 110mm PCD to 448mm PCD.

This tool is designed to rotate the camshaft when timing engines.

A flywheel rotation tool for Volvo / Mack trucks. Simply remove the flywheel cover and insert the rotation tool.

• Application: Volvo / Mack trucks (MP8 | MP10)
• OEM equivalent: 88800014

An essential time saving tool for removing / installing the diesel injector sleeve on Volvo FM12 trucks.

This kit contains three tools: a tool for tapping the injector sleeve head, a tool for removing the injector sleeve, and a tool for injecting the new sleeve.

• Application: FM12 trucks
• Use in conjunction with ET1350B

A specialised tool for aiding in installing / removing the injector sleeve (21515329) on Volvo FM12 trucks.

For removing sleeves, put the 2-1 puller into the cylinder to reach the sleeve. Tighten the top nut to make the puller retain the sleeve. Install the 2-2 puller ring, and assemble the #1 puller. Screw top nut to remove the old sleeve.

For installing new sleeves, put the new sleeve into the 3-1 expander. Then install the 3-2 tap thread. Finally put the entire tool into the cylinder. Screw down the top nut to install the sleeve perfectly.

A robust oil filter wrench for Volvo trucks / buses using original oil filter # 466634.

• Applications: Volvo trucks - F6, FE6, FE7, F10, F12, F16, FH, FH12, FH16, FH16J, FL6, FL7, FL10, FL12, FL608, FL609,FL610, FL611, FL612, FL613,FL614, FL615, FL616, FL617,FL618, FL619, FM, FM7, FM9, FM10, FM10BR, FM12, FM12BR, FS7, N10, N12, NH12, NL10, NL10S, NL12,NL12S, VM
• Original oil filter # 466634.

A specialised tool to remove the end ball joint of the drag link of the Volvo FM12 | FM | FH trucks. Simply put this tool onto the special shape ball joint. You can use an air tool to turn the screw.

A specialised kit to remove / install injector sleeves on Volvo trucks. This kit needs to be used together with ET1350B.

• Applications: Volvo FM | FM12 | FH trucks
• Suits genuine injector sleeves: 85124276 | 85104134 | 21515329

Female quick coupling adaptor for radiator when purge or refilling radiator liquid. Suits most Volvo trucks.

• Application: Volvo trucks