Ford

A diesel engine timing overhaul kit for Fiat / Ford / GM vehicles fitted with a 1.3L diesel 16v engine.

• Includes crankshaft pulley flange holding tool, timing chain tensioner tool, and camshaft holding tool

A special 16 point impact socket for the centring valve of the camshaft timing on BMW & Mini Vanos unit and Ford VCT modules.

• 16 Point impact socket
• 22mm dia
• 1/2" Sq Drv

Required tools when replacing the crank seal / removing front engine cover to replace the chain. For use on 2.0L | 2.2L | 2.4L | 3.2L TDCi / TDDi Duratorq engines fitted to Ford Transit | Ford Ranger plus Jaguar X Type X400 and Land Rover Defender.

• First component removes diesel pump sprocket cover, and also allows oil seal to be removed / replaced.
• Second component aligns / centralises the front camshaft chain cover before fitting the new oil seal.

For 4 Cyl Pumpe Duse diesel engines (1.9L | 2.0L engine with 2 & 4 valve) with arrow at 12 o'clock position with round sprockets. Also suited to FORD, SEAT & SKODA 1.9L TDi PD 3 & 4 cylinder engines.

• OEM Equiv: T10050

For 1.0L 3 Cyl EcoBoost GDTi engines.

• OEM Equiv: 303-1602

This set locks / holds the flywheel in position to allow the release of the crankshaft pulley screws during timing belt replacement. It has the same functions as ET1574 but with the extra locking adaptors expanding its use on a larger model group in the Ford petrol & diesel engine range.

• Applications across a wide range of Ford engines especially: Diesel 1.8TDdi / TDCi 2.0TDCi, Petrol: 1.6Ti-VCT | later 1.25L / 1.4L 16v Duratec
• Adaptor lengths: 11mm | 29mm | 42mm

Oil pump locking tool for 2.0L, 2.2L, 2.4L, 3.2L diesel engines and 2.3L Duratec petrol engines.

Allows the oil pump to be removed / replaced in the same position (to ensure that the oil pump is not operating with excessive side loads).

• Mondeo | Ranger | Transit (2.0 / 2.2 / 2.4 / 3.2 TDCi / TDDi / Di Duratorq)
• OEM Equiv: 303-705 | 303-1093 (PSA 0198H)

An essential kit for locking camshafts / crankshafts / timing covers on Ford / Volvo. Plus Mazda crankshaft pulley holder

This kit suits those engines where one camshaft is longer than the other one.

Locks / holds camshaft & crankshaft when servicing the timing chain on 4.0L 12V SOHC engines used in Ford / Land Rover / Mazda vehicles.

• Applications: Ford Courier (05-06), Explorer (96-08) | Mazda B4000 Bravo | Land Rover Discovery 3 (05-09)
• OEM Equiv: OTC 6488 (303-564 | 303-565 | 303-571 | 303-573 | 303-575 | 303-576 | 303-577 | 303-578)

A specialised timing tool kit when replacing the timing belt on Ford Zetec engines. This kit suits a wide range of popular Ford / Mazda vehicles.

• Engine: ZETEC (1998 onwards) | Twin Cam 16V petrol engines
• Applications: Cougar | Escape | Focus | Mondeo
• Timing pin also suits Mazda 121 (1.25L petrol)

This kit suits Ford F150 | Mazda CX-9 vehicles, and is used to hold the camshafts in position when setting the timing. Includes camshaft holding fixtures and chain tensioner hold down tool.

• Applications: Ford F150 | Mazda CX-9
• OEM Equiv: 303-1248 | 303-1530

For new high efficiency 4 cylinder petrol turbocharged engines with variable valve timing fitted to Ford / Volvo vehicles.

Also refer ET5412 camshaft setting bar.

Applications: Ford Fiesta WZ | Focus LW | Kuga TF | B-Max | C-Max, Volvo S60 | V60

OEM Equivalents & Engine Codes:

• TT1054: Ford 303-1054, VAG T10115, VAG T03006
• TT1550: Ford 303-1550, Volvo 999 7431
• TT0748: Audi 303-748, Volvo 999 7406, Mazda 21-259
• TT1097: Ford 303-1097, Volvo 999 7429
• JTJA | JQMA | M8MA | M9MA | JTMA | B4164T | PNDA

For securing the cylinder head, and camshaft / crankshafts during servicing of cylinder head assemblies on 4 | 5 | 6 cylinder engines.

This kit has all the tools required for cam replacements and head rebuilds on Volvo 2.5L petrol engines.

• Engine codes: VOLVO B41XX | B42XX | B52XX | B62XX | B63XX, FORD: B5254T
• Volvo OEM Equiv: 9995451 | 9995454

This modest little set is designed for the 2.0L / 2.2L DOHC common rail diesel engines in Ford, Land Rover, Peugeot & Volvo vehicles.

It allows the camshaft pulley to be locked using the timing pin while securing the flywheel / ring gear with the locking pin & plate. The cam belt transmits drive from crankshaft to camshaft then from one camshaft to the other by chain located in the cylinder head.

• OEM Equiv: 303-393 | 303-393-01 | 303-1059 | 303-1277

This kit locks the camshaft during timing belt replacement over the complete range of Ford Duratec engines in both belt & chain drive variants.

• Applications: Wide range of Ford | Mazda | Volvo vehicles with 1.25L | 1.4L | 1.6L 16v Ti-VCT engines plus 1.8L | 2.0L | 2.3L 16v engines.

This kit contains specialised pins for locking flywheels, camshaft sprockets and aligning the crankshaft and fuel pump on a wide range of Duratorq engines.

• Includes special pins for 2.0L | 2.4L chain driven engines

Specialised kit for holding camshafts in the correct position while installing the front crankshaft oil seal, and while setting the tappets.

Designed for use with 2.5L 20V DOHC petrol engines fitted to Ford Focus, and various Volvo vehicles.

• OEM Equiv: 303-1180 | 303-1183 (999 5765)
• Engine codes: B5254 | HYDA

This timing kit has been designed for late model Ford 2.0L EcoBlue engines in the Ford Transit (2016 >) which have the belt in oil design whereby the drive belt is located inside the oiled area on the engine.

• Application: Ford Transit (YN | YO)
• Engine codes: YMF6 | YNF6 (2016 onwards)
• OEM Equiv: 303-1637 | 303-1643 | 303-1650 | 23-019

ideally suited for operating the belt tensioning device, to allow easy belt changing. Especially suitable for hard to reach areas.

• Internal square drive adaptor
• Applications: Duratorq 2.0L | 2.2L TDDi and TDCi
• Engine codes: D5BA, D6BA, HJBA, HJBC, FMBA, N7BA, QJBB, QJBA

For SCTI EcoBoost / Ti-VCT 2.0L petrol engines.

• OEM Equiv: 303-1504 (999-7405 | 303-1061)

For removal and installation of timing chain tensioners on Ford 3.9L & 4.0L 6 cylinder engines.

• Application: Falcon EA onwards
• 25mm PCD
• 5mm pin diameter

Counter holds crankshaft pulley while servicing pulley retaining bolt. Also suits certain Volvo vehicles.

• OEM Equiv: 205-072 (999 7128 | 49 B011 105)
• Applications: Ford Fiesta | Mondeo | Transit, Volvo C30 | S40 | V50

For removing / installing the crankshaft bolt. The holding tool prevents the pulley from rotating when extracting the central fixed screw.

• Ford Escape 2.3L

Specially designed head profile permits access via a deep socket (not included) to each of the pulley bolts in turn.

• Applications: Mondeo / Transit / Ranger with 2.0L | 2.2L | 2.4L | 3.2L Duratorq diesel / Duratec petrol engines.
• 600mm OL

This pin locks the crankshaft in its timed position on Automatic Transmissions (via the flywheel) when servicing the camshaft drive chain. This pin has a special half moon cut at the end of the pin in order to lock the flywheel.

Use with ET1900 crankshaft holding tool.

• Applications: Ford Transit (11-14) | Ranger (11-17)
• Engines: 2.2L | 3.2L TDCi diesel
• Engine code: CYFA | P4AT | P5AT
• OEM Equiv: 303-1562

Flywheel locking pin for Ford Duratorq engines with common rail fuel injection. The pin locks the flywheel when changing the cam belt.

Applications include Mazda BT-50 | Ford Ranger | Ford Everest

• OEM Equiv: 0198-A | 303-675 | 303-698
• Engines codes: 3.2L P5AT | MZ-CD

A specialised tool for removing the vibration damper pulley on 2.0L EcoBlue engines fitted in the Ford Ranger | Kuga | Transit, from 2019. Allows for safe removal without damaging the bonded rubber section. Ensure that thrust screws are suitably greased, in accordance with manufacturer specifications.

• OEM Equiv: 303-1657
• Application: Ford Ranger | Transit | Transit Custom
• Engine: 2.0L EcoBlue | YN2S

A specialised tool designed to aid in the removel of the front pulley in order to access the timing belt.

• Applications: Ford EcoBlue 2.0L (2016 onwards)
• Engine codes:
• OEM equiv: 205-295

Locks camshafts in their timed position, when there is a need to remove the variable valve timing pulleys.

Use with ET0512.

• Applications: Ford Fiesta | Focus, Volvo V40 | S60 | V60
• Engine codes: Ford HXDA | HXJA | JQMA | PNDA | U5JA, Volvo B4164T
• OEM Equiv: 303-1552

For front covers that are a pressed tin component not fitted with dowel pins to position it. This tool aligns the front camshaft chain cover before fitting a new front oil seal. Use on crankshaft end to position to the cover and hold in position while cover fixings are tightened. Part of ET9161 kit for replacing front crankshaft oil seals. Applications: Mondeo, Ranger Transit w/ Puma engines.

Flywheel locking tool for the 2.7D For Territory engine.

• OEM Equiv: 303-1586

Essential tools for allowing the removal of the chain driven high pressure diesel fuel pump, while maintaining the engine timing and chain position.

Designed to be used with the ET9161 to remove the sprocket cover.

• Kit comprises ET1311 / ET1512

This tool locks the sprocket of the injection pump in position on Ford Duratorq TDDi / TDCi engines.

• Applications: 2.0L | 2.2L | 2.4L Duratorq TDCi (Puma) engines, on Mondeo | Transit.
• Approximate dimensions: 115mm OD | 69mm ID | Height 22mm

Contains all tools needed for Ranger 2.2L / 3.2L timing (including automatic transmissions), plus high pressure pump puller / locking tools.

The oil seal installation tool is available separately. Refer ET9161.

• OEM Equiv: 303-249 | 303-1317 | 303-1562 | 303-1587

A special timing kit for the 2.7L Diesel Ford Territory containing an additional pin / locking tool to correctly service the engine.

The Ford Territory shares a similar engine to the 2.7L TDV6 Jaguar / Land Rover. However a longer flywheel pin, and locking tool is required. These tools are also available separately (SKU: ET1565).

• Engine code: 276DT
• OEM Equiv: 303-1585 | 303-1586

Essential tools for setting and locking the engine, and for setting the position of the variable cam timing units on Ford 1.0L Ecoboost engines.

• Applications: Ford Fiesta WZ | Focus LZ | EcoSport BK
• OEM Equiv: 303-732 | 303-1064 | 303-1065 | 303-1602 | 303-1604 | 303-1606

This kit allows the locking of the camshaft & crankshaft on turbo diesel engines where the pump is driven by a separate chain drive for timing belt replacement as well as the camshaft sprocket puller. ALSO suited to Citroen & Peugeot 1.4L / 1.6L TDCi HDi diesel models.

A specialised kit for locking late model 1.5L 3 cylinder EcoBoost engines in their timed position to service the camchain / check timing.

• Application: Ford Focus (18-)
• Engine code: Y1DA
• OEM Equiv: 303-1643 | 303-1649 | 303-1645

This kit is required to replace camshaft timing belt on chain drive valve timed engines (97-09).

Use with ET1374.