BMW

Set of 8 clips to secure the intermediate levers during assembly.

• OEM Equiv: 11 9 310
• Engine codes: N42 | N46

Holds the vibration damper when releasing and tightening down the central bolt. Isolates vibration damper to prevent damage when servicing the crank pulley.

• Engines: W11
• OEM Equiv: 118460

This timing kit is designed to lock the camshaft in Top Dead Centre when adjusting the valve timing on N55 engines.

• Engine code: N55 (09-15)

This chain tensioner tool is for use during installation of cylinder heads or camshafts.

• Engine codes: M52 (96-99) | M52TU (99-02) | M54 (01-05) | M56 (01-05)
• OEM Equiv: 11 4 220

Rigid primary chain pre- tensioner for late model new generation engines (short format), including N12 | N14 | N40 | N42 | N46 | N52. Two required for BMW V8 engines. Also suitable for BMW Mini 1.4L, 1.6L 16v N12- N14 engines & Peugeot 207, 308 Citroen C4 (EP6, EP6 DT / DTS & EP3). Use with ET1188B for N52 Cam alignment & ET1300 N14 / R56 Kit.

• OEM Equiv: 11 9 340

Use spacer shim with holding wrench ET1311A to remove the crankshaft bolt on most BMW 4 / 6 cylinder engines up to 2001.

• Applications: M43 | M43TU | M44 | M50 | M52 | M52TU engines.

A specialised kit to facilitate timing chain replacement in BMW engines, offering major time savings.

A chain guide tool facilitates old chain withdrawal and simultaneous new chain insertion.

• Engine codes: N43 | N45 | N46 | N47
• Applications: E81 E87 E87 LCI E88 E82 F20 F20 LCI F21 F21 LCI E46 E90 E90 LCI E91 E91 LCI E92 E92 LCI E93 E93 LCI F30 F30 LCI F31 F35 F35 LCI E60 LCI E61 LCI F07 GT F07 GT LCI F10 F10 LCI F11 F11 LCI F06 GC F06 GC LCI F12 F12 LCI F13 F13 LCI X1 (E84) X3 (E83) X3 (E83LCI) X3 (F25) X4 (F26) X5 (E70LCI) X5 (F15) X6 (E71) X6 (F16) Z4 (E85) Z4 (E89) R56 R56 LCI R55 R55 LCI R57 R57 LCI R58 R59 R60 R61
• OEM Equiv: 83 30 2 354 985 (83302354985 )

Specialised kit for the N20 / N26 2.0L petrol engine, for dismantling and assembling the intake and exhaust camshaft. Fixes the camshaft at TDC position.

• Engine codes: N20 | N26
• Use in conjunction with ET1340A for manual transmissions
• Use in conjunction with ET1835A for automatic transmissions

A specialised timing kit for popular BMW & BMW Mini 1.2L | 1.5L (B38) and 2.0L (B48) engines.

• Engines: B38 | B48

A specialised timing tool kit for locking camshaft / crankshafts, and setting the crankshaft at TDC.

This kit is suited to the new B series 3 cyl / 4 cyl / 6 cyl engines which have replaced the N20 / N26 engines. Also suits the new Toyota Supra GR (19-)

• Engines: B38 | B48 | B58
• OEM Equiv: 2 358 122 | 2 288 380 | 2 365 488

Services a wide range of older (83-04) BMW petrol belt & chain driven engines. Locks camshaft in cylinder 1 TDC firing position. Two pieces are recommended for V12 camshaft assembly.

Also used on Land Rover 2.5L TD | TD4 | TD6 diesel engines.

• Applications: 316i | 318i | 518i | Z3
• Engine codes: M40 | M43 | M70 | M73

For setting the timing position on camshaft & crankshaft during belt or chain replacement. The pre-load tool for the primary timing chain tensioner has two threaded nuts M22 x 1.5 (M42 / M60) & M26 x 1.5 (M50 / M52). Also includes locking tools for engines with twin VANOS (VVT) units on BMW M52 (TU) / M54 / M56 essential for dismantling, assembly & timing of the twin VANOS engines plus the VANOS engagement wrench for BMW twin camshaft single VANOS (VVT) unit mounted on the inlet camshaft.

Allows for assembly / disassembly of 4 | 6 | 8 | 12 cylinder engines (91-).

For twin cam engines where both camshafts have to be locked in place while servicing cylinder head and / or timing chain.

For M52 single Vanos engines, ET1121B-4 is also required / For M52 | M54 dual Vanos engines, ET1121B is also required.

For 1.8L | 2.0L DOHC 16V twin cam Valvetronic petrol engines with chain driven camshafts, to check / adjust engine timing, and align the twin VANOS units. Use with ET1020A & ET1156C.

• Applications: BMW 1.8L | 2.0L DOHC 16V
• Engine codes: N42B16 | N42B20 | N46B20

This timing kit is designed for 1.6L | 2.0L chain driven engines to set the camshaft timing during cam chain removal or replacement (or check / adjust timing). The kit contains the camshaft locking tool; VANOS sensor alignment bar; balancer shaft locking plate; timing chain tensioner retractor & locking pins plus the flywheel locking pin.

• Engine codes: N42B16 | N43B20

For 1.6L petrol twin camshaft chain drive engines to lock the engine for removal / replacement of the camshaft chain as well as adjusting & checking camshaft timing. A Vanos setting plate is included to lock the variable valve timing in the correct position.

• Engine codes: N45
• Application: 116i (03-08)

For 2.0 DOHC 16v | 3.0L DOHC 24v (98-) engines. Used for checking and adjusting timing plus removal and installation of camshaft / variable camshaft timing unit. ALSO suits certain Holden | Land Rover | Rover & MG vehicles.

OEM Equivalents & Engine Codes:

• ET1020A: BMW 11 2 300, Holden KM 813, Land Rover LRT 12-108
• ET1388: BMW 13 5 120, Land Rover LRT 12-119, Holden KM 825
• TT3320: BMW 11 3 320, Holden KM 811, Land Rover LRT 12-112
• TT6322: BMW 11 6 322, Land Rover LRT12-173
• TT6320: BMW 11 6 320
• TT3340: BMW 11 3 340, Land Rover LRT 12-172
• TT5180: BMW 11 5 180, Land Rover 12-227
• TT6080: BMW 11 6 080
• TT3360: BMW 11 3 360, Land Rover LRT 12-115, Holden KM 822
• TT5190: BMW 13 5 190
• TT5120: BMW 13 5 120
• TT5191: BMW 13 5 191
• TT5192: BMW 13 5 192
• M47 | M47TU | M51 | M57 | M57TU

Covers latest range of 2.0 | 3.0 litre common rail diesel engines. Use with ET1441 for inline engine & ET1338 for transverse engine. Also for LAND ROVER Freelander (TD4) / RANGE ROVER (TD6) (00-02) / ROVER: 75 2.0L D (M47R) (99-03) / MG: ZT (M47R).

For BMW N47 / N47S 2.0 twin camshaft 2.0L diesel chain drive engines fitted in the 1 / 3 / 5 series, X3, X4, X5 and Countryman D R60.

• Engine codes: BMW N47 | N47S | N57
• OEM Equiv: 11 3 340 | 11 5 320 | 11 6 480 | 11 8 740 | 11 8 760

A specialised timing kit for locking camshafts / crankshafts in place on BMW diesel engines, as listed below. The kit includes fuel pump sprocket retaining tools as well as a crankshaft turning socket.

• Engine codes: N47 | N47S | N57 | N57S

A specialised timing kit for BMW vehicles fitted with N47 | N57 engines. This kit includes a camshaft setting plate, flywheel locking pin, and crankshaft turning tool. Also included is a HP pump sprocket retaining tool (required when removing / installing the pump), and a crankshaft alignment gauge to properly align the crankshaft at bottom dead centre.

• Engine codes: N47 | N57

A specific timing tool kit for M3 BMW vehicles fitted with the S54 (32 6S 4) chain driven 3.2L 6 Cyl 24V petrol engine.

• Applications: M3 S54 Cabriolet (00-06), Sports Coupe (99-06), CSL Sports Coupe (03-04)
• OEM Equiv: 11 2 300 | 11 5 100 | 11 7 160 | 11 7 342 | 11 9 130 | 119 140 | 11 9 170

A master timing kit for BMW 2.5L | 3.0L petrol engines. This kit is designed to hold the camshafts / crankshafts when working on the timing chain / engine timing.

• Engine codes: N51 | N52 | N52K | N53 | N54 | N55

Suits 2.5L | 3.0L Twin VANOS camshaft setting / locking on chain drive BMW VANOS 6 cylinder engines (98-). Due to the introduction of a Twin Vanos (variable valve control) system on the BMW 6 cyl twin cam chain driven petrol engine Vanos adjustment units fitted to inlet & exhaust camshafts must be reset to align with camshafts when setting engine timing after cam chain replacement. USE with ET1020A, ET1033A & ET1096

• Series: E36 (99-03) | E38 (90-02) | E39 (98-03) | E46 (08-07) | E53 (99-07) | E65 / E66 (02-05) | E85 / E86 (03-06)
• Engines: M52 | M54
• Engine codes: M52B20 | M52B25 | M54B25 | M52B28 | M54B30

Locks camshaft & crankshafts on M60 & M62 Vanos & Non Vanos V8 petrol engines. It consists of 2 blocks, swivel lock plates & locking pin for setting camshaft timing. Also suits Range Rover / Land Rover V8 44 8S 2 4.4L (03-05) Single Vanos & Morgan Aero 8 M62 (00-04).

A vital timing chain tool kit for 3.6L | 4.0L | 4.4L | 4.8L V8 engines, and new generation V12 engines. These tools align intake & exhaust cams in the correct timing position by holding the valve timing whilst loosening & tightening the camshaft adjuster nut for assembly plus damper tools.

This kit is designed for 550 | 650 | 750 series | Alpina B7 vehicles with N63 V8 engine.

• Please check the camshaft size carefully. This tool is only suitable when both camshafts are 20mm on the flats.
• If not, and one camshaft is 20mm on the flats / other 25mm on the flats, then you must use ET1593A instead.

This kit locks the camshaft in the TDC position when servicing timing chains on S63 / N63 (9/12 onwards).

• Please check the camshaft size carefully. This tool is only suitable when one camshaft is 20mm on the flats, and the other camshaft is 25mm on the flats.
• If not, and both camshafts are 20mm on the flats, then you must use ET1451A instead.

A specialised timing kit for BMW M3 petrol engines, for locking the camshafts / crankshafts in position when servicing the timing chain.

Application: M3 (07-13) with E90 | E91 | E92 | E93 chassis
• Engine code: S65B40A
• OEM Equiv: 11 5 290 (11 5 291 | 11 5 292) | 11 5 320 | 11 5 370 | 11 9 970

For replacing the camshaft timing chain on the S85 engine, as well as setting the correct camshaft & VANOS timing. This kit also aids in locking the camshaft at the TDC position during service work on intake & exhaust camshaft.

• Engine: S85
• OEM equiv: 115300 | 115301 | 115302 | 115381 | 115410

Used for removing and installing the pressure spring for the intermediate levers on BMW (N20 | N51 | N52 | N52K | N52T | N55) engines.

Designed to fit the newer VVT spring block that is 58mm wide.

This lever is used for applying tension to the valvetronic springs during servicing.

• Engine codes: N62 | N73
• OEM Equiv: 11 9 480

Used to remove & install the single VANOS adjusting unit with disc spring on the inlet camshaft fitted to BMW 4 & 6 cylinder twin cam engines. NOTE: VANOS adjustment system without plate springs can be removed without the use of this tool.

• Engine codes: M50 | M52 | S50 | S52

For screwing in chain tension with top right timing case cover removed. Use with camshaft chain pre-tensioner tool (ET1136-5). Also suits Range Rover 4.4L V8 (03-05)

• M22 x 1.5
• Engine code: M60 Vanos

Special socket for adjusting Vanos during assembly, as well as adjusting valve timing.

• Engine code: S85B50 | S85B50A