Oil Drain Plug Key Set
An essential set of 18 keys for draining sumps, axles, gearboxes, differentials etc. 3/8" Sq Drv.
- Hex: 8, 9, 10, 12, 14, 17mm
- Square: 7, 8, 10, 11, 12, 13, 14mm
- Square: 5/16" (male), 3/8" (male) | 10mm (female)
- Spline (Sec): M16
- Triangular: 10mm
Oil Drain Plug Washer Seat Resurface Kit
A specialised kit for resurfacing the washer set of the oil drain plug, to ensure reliable sealing for the drain plug. Pilot centering pins (M14 / M15) ensure a correct centred boring.
Simply screw the relevant guide into the sump and then apply the cutter to resurface the seal area of the sump.
- M14 x P1.5 for standard oil drain plug threads
- M15 x P1.5 for oversized threads
Oil Drain Repair Kit
This kit is designed for repairing differential, gearbox, sump plug threads. Simply tap the damaged thread slightly oversize (oversize tap included), and then a new drain plug and washer.
- M11 x P1.5
- Includes tap plus 6 drain plugs / copper washers
Oil Drain Repair Kit
This kit is designed for repairing differential, gearbox, sump plug threads. Simply tap the damaged thread slightly oversize (oversize tap included), and then a new drain plug and washer.
- M13 x P1.25
- Includes tap plus 6 drain plugs / copper washers.
Oil Drain Repair Kit
This kit is designed for repairing differential, gearbox, sump plug threads. Simply tap the damaged thread slightly oversize (oversize tap included), and then a new drain plug and washer.
This kit is ideal for use on M14 sumps where the thread has been stripped or worn.
- M15 x P1.5
- Includes tap plus 6 drain plugs / copper washers
Oil Drain Repair Kit
This kit is designed for repairing differential, gearbox, sump plug threads. Simply tap the damaged thread slightly oversize (oversize tap included), and then a new drain plug and washer.
Ideal for M16 sump plugs where the thread has been stripped.
- M17 x P1.5
- Includes tap plus 6 drain plugs / copper washers
Oil Extractor | Vacuum Type
A manual type vacuum pump for extracting engine oil (and ATF / coolant) etc. Includes a 5.6mm OD suction probe which fits most dipstick tubes.
This kit is NOT suitable for extracting petrol / diesel fluids, as the sealants used in this kit are not fuel / solvent resistant.
- 6 litre tank capacity
- Plastic base to step on to stabilise the tank while pumping
- Conical pour spout for spill free waste oil discharge
Oil Filter Cup Wrench
This oil filter socket suits new model Subaru vehicles (03-) having the 2.5L 4 Cyclinder turbo engine. The oil filter socket fits between the exhaust manifold and the oil filter for easy removal / installation of the filter.
Also suits Yanmar 3YM30AE filters.
- 66.5mm dia
- 14 Flute
Oil Filter Cup Wrench
This oil filter cup wrench is commonly used on the Mitsubishi Triton.
- 100mm dia
- 15 Flute
- 3/8" Sq Drv
Oil Filter Cutter
This tool is designed to cut the oil filter before recycling, in order to extract any residual oil.
The tool features a two bearing design, to make it easier to rotate the oil filter. The blade is made from a hardened SKH9 steel, while the body is made from an aluminium steel alloy for lighter / more durable construction.
- The cutter incorporates a longer body to allow the unit to be used to cut oil filters with a diameter from 60mm - 140mm.
Oil Filter Drain Tool
A handy tool for preventing oil spillage when draining the oil filter on 2.0L petrol | 2.5L diesel engines on VAG engines. It can also be used to prime the filter housing with new oil after installing new oil filters.
- See attached manual for list of applications.
Oil Filter Locking Plier
Fits most vehicles from small cars to trucks. Also suitable for water filters. Heat treated CrV steel jaws and carbon steel handle, triple chrome plated.
- Jaw opening: 2-1/8" - 4-5/8" (53 - 118mm)
- 228mm overall length
Oil Filter Removal Wrench Kit
Low profile design for removing oil filters in areas of tight access, which require an offset design.
- Suits most Ford / Holden & European / Korean vehicles
- T shaped | 24mm | 27mm | 30mm | 32mm | 36mm | 38mm
- 3/8" Sq Drv
Oil Filter Socket
Oil filter wrench for removing Mercedes / Smart oil filter covers. Also suits Ford Ranger, Ford Focus TDCi 1.6L | 2.0L (04-11) located underneath the air cleaner.
- 27mm dia
- 6 point (single hex) socket
- 3/8" Sq Drv
Oil Filter Socket
A specialised shallow oil filter socket for removing oil filter covers on a wide range of vehicles including Holden / Mercedes.
- 32mm dia
- 6 point (single hex) socket
- 3/8" Sq Drv
Oil Filter Socket
A specially designed shallow socket (with face drive) for removing BMW and BMW Mini filter covers. The face drive protects the corners of the filter from damage.
Applications also include Ford / Jaguar 2.2D | Mini R56 | Mercedes M116 / M606 engines.
- 36mm dia
- 6 point / single hex socket
- 3/8" Sq Drv
Oil Filter Wrench
This oil filter wrench is designed for Hyundai / Kia vehicles with a 2.0L | 2.2L diesel R engine.
- Applications: Hyundai: IX35 (from 2009) | Santa Fe (from 2012), Kia: Sportage (R) (from 2011) | Sorento (R) (from 2010) | Carnival (from 2010)
- 42mm dia (across the flats)
- 1/2" Sq Drv
Oil Filter Wrench
This round oil filter wrench key is designed for VAG diesel engines fitted with Mann Mahle and Knecht filters. Ideal for use where space is restricted.
- 42mm round
- 1/2" Sq Drv
Oil Filter Wrench
A standard oil filter wrench with traditional style handle, for where filter access is not restricted. Designed to suit 2-7/8" - 3-1/8" (73-80mm) filters.
- 2-7/8 - 3-1/8" (73 - 80mm)
Oil Filter Wrench
A deluxe oil filter wrench with tempered spring steel band with gripping studs to hold filters for easy removal. Designed to suit 3" - 3-3/4" (75 - 95mm) filters.
- 3" - 3-3/4" (75 - 95mm)
Oil Filter Wrench
Cup style oil filter wrench suitable for Honda l-dtec diesel fuel filters and oil filter removal on Hyundai / Kia 3.3L and 3.8 V6 petrol engines.
- 88.8mm x 15F
- 3/8" Sq Drv
- OEM Equiv: Honda: 070AA-RL00200
Oil Filter Wrench
Specially design for easy removal of canister type filters. For 3-1/2 - 3-7/8" (89 - 98mm) filters.
Oil Filter Wrench
Part of the Endeavour Tools range of specialised oil filter wrenches for truck servicing. This 89mm diameter wrench suits Isuzu Elf trucks.
- Isuzu Elf
- 89mm diameter | 15 points
- 1/2" Sq Drv
Oil Filter Wrench
A standard oil filter wrench with traditional style handle, for where filter access is not restricted. Designed to suit 3-5/8" - 3-15/16" (92 - 100mm) filters.
- 3-5/8 - 3-15/16" (92 - 100mm)
Oil Filter Wrench
This oil filter wrench suits VAG vehicles fitted with the Bosch 0 451 203 087 oil filter.
- Applications: VW Transporter T4 (92-03) | Volvo 740 | 760 | 940 | 960
- 95mm diameter
- 9 Ribs
- Suits OEM filter: 0451203087
- 1/2" Sq Drv
Oil Filter Wrench
Part of the Endeavour Tools range of specialist oil filter wrenches.
- 100mm diameter
- 15 point
Oil Filter Wrench
Cup style oil filter wrench for Isuzu / Hino trucks (17T | Euro 4).
- 118mm | 16 Points
- 1/2" Sq Drv
Oil Filter Wrench
A heavy duty cam type oil filter wrench for use with 1/2" Sq Drv or 1" hex drive tools.. Designed to suit 3-3/8 - 3-7/8" (89-98mm) filters.
- 3-3/8 - 3-7/8" (89-98mm)
Oil Filter Wrench
Socket drive chain filter wrench. Designed for filters in confined areas.
- 1/2" Sq Drv socket
- 16" chain
- Up to 4-1/4" (108mm) filters
Oil Filter Wrench
A sturdy non slip strap type wrench for spin type filters up to 6" (150mm). For use with 1/2" Sq Drv tools.
- Filter sizes to 150mm diameter
- Sturdy nylon strap
- Use with 1/2" Sq Drv tools
Oil Filter Wrench
Non slip band designed to provide a strong grip. Swivel handle for tight areas. Notched link allows setting to one of four preset lengths.
- For 2-1/2 - 3-1/2" (60-89mm) filters.
Oil Filter Wrench
A heavy duty oil filter wrench with a dimpled band for extra grip.
- For 3-3/4 - 4-1/2" (95 - 111mm) filters.