Mercedes Valve Spring Compressor Mercedes Valve Spring Compressor

Mercedes Valve Spring Compressor

A time saving tool for removing / fitting valve springs when replacing springs / seals / valves on pre 1991 engines. Avoids the need to remove the cylinder head.

  • Engines: M114 | M115 | M116 | M117 | M130 | M180
  • NOT suitable for M110

Mercedes Viscous Fan Counterholder Tool

Mercedes Viscous Fan Counterholder Tool

A counterholder tool for belt pulleys on coolant pumps when assembling / disassembling the viscous fan clutch.

  • Applications: M272 engine (965 | 966)
  • OEM Equiv:W611589004000

Overhead Camshaft Valve Shim Remover

Overhead Camshaft Valve Shim Remover

For use on overhead camshafts which use space shims - especially Volvo / Holden / Massey Ferguson. This tool compresses the valve spring allowing the shim to be removed / installed without the need to remove the camshafts.

  • T bar design
  • Time saving tool to quickly remove shims.
  • Applications: Holden | Massey Ferguson | Toyota | Volvo etc

Petrol Engine Compression Tester

Petrol Engine Compression Tester

This petrol engine compression kit provides a fast way for testing cylinder compression pressure on engines with deep, recessed spark plugs and / or difficult access.

A special air hold valve allows for easy resetting of the gauge, and tapered cone adaptors allow for multi size applications.

  • 58mm dia gauge (10-300 psi) includes pressure release valve
  • Curved / straight connectors - M10x1.0 | M12x 1.25 | M14x1.25 | 3/8-24 fittings

Petrol Engine Compression Tester

Petrol Engine Compression Tester

A handy entry level compression tester for small petrol engines, including motorcycles. This unit is supplied with 14mm | 18mm threaded adaptors, plus a 150mm extension with rubber tipped cone for universal applications.

  • 0-300 PSI / 0-21kg/cm2 dual calibrated gauge
  • 315mm extension hose with quick connect coupler
  • 14mm | 18mm threaded adaptors
  • 150mm steel extension with rubber tipped cone

Piston Ring Compressor

Piston Ring Compressor

Piston ring compressors allow for the quick installation of pistons and rings into the engine cylinder.

Our range of piston ring compressors have a self locking ratchet assembly / wide band design to enable compression / installation in one simple step.

Piston Ring Compressor

Piston Ring Compressor

Piston ring compressors allow for the quick installation of pistons and rings into the engine cylinder.

Our range of piston ring compressors have a self locking ratchet assembly / wide band design to enable compression / installation in one simple step.

Piston Ring Compressor

Piston Ring Compressor

Piston ring compressors allow for the quick installation of pistons and rings into the engine cylinder.

Our range of piston ring compressors have a self locking ratchet assembly / wide band design to enable compression / installation in one simple step.

  • 60 - 175mm capacity
  • 80mm height
  • Adjustable bore dia using key provided
  • Made from premium spring steel

Piston Ring Plier

Piston Ring Plier

Installs & removes piston rings. DA3038 features automatic spring action. Jaws are shaped to protect the piston ring from damage.

  • 80 - 120mm

Seal Driver Kit

Seal Driver Kit

SKU: DA9137

Seal Driver Kit

One drive handle and 16 adaptors drive seals quickly without damage to parts. Includes special adaptors for shielded seals.

  • PLASTIC Adaptors Sizes # 1- 61.3mm Dia, # 2 - 69.0mm Dia, # 3 - 88.0mm Dia, # 4 - 33.5mm Dia, # - 5 38.0mm Dia, # 6 - 41.5mm Dia, # 7 - 43.0mm Dia, # 8 - 50.0mm Dia, # 9 - 52.3mm Dia, # 10 - 53.7mm Dia, # 11 - 61.6mm Dia, # 12 - 64.8mm Dia, # 13 - 69.3mm Dia, # 14 - 76.0mm, # 15 - 82.4mm Dia, # 16 - 85.5mm Dia
  • One Metal Base Plate 89.0mm x 14mm Bore + Drive Handle

Shim Style Valve Adjusting Kit

Shim Style Valve Adjusting Kit

For Nissan / Toyota / Hyundai engines with overhead camshaft engines using spacer shims.

The shim pliers are designed to push between the camshaft and the shim, allowing the wedge tool to be inserted between the valve lifter edge and the camshaft.

This then allows for easy shim replacement.

  • Applications: Nissan Maxima | Patrol

Thick Wall Crank Bolt Socket Set

Thick Wall Crank Bolt Socket Set

Break loose crank bolts that normal tools can't!

A set of thick wall crank bolt sockets for Honda / Mazda / Toyota vehicles. Counter weighted design for high torque applications.

  • 17mm - Honda | Kia
  • 19mm - Honda | Toyota
  • 21mm - Ford | Holden | Jeep | Mazda
  • 1/2" Sq Drv

Torx T60 Bit Socket (Modified)

Torx T60 Bit Socket (Modified)

A modified Torx T60 bit socket for BMW ZMS engines (4.0L and 4.4L V8) fitted with a dual mass flywheel where the mounting bolts are off centre to their acccess points. The reduced diameter of the tool allows the socket to line up with the bolts.

  • Torx T60
  • 1/2" Sq Drv
  • OEM Equiv: 114180

Transmission Cooler Line Disconnect Tool Transmission Cooler Line Disconnect Tool

Transmission Cooler Line Disconnect Tool

Quick disconnect tool at the radiator end for Holden vehicles since 2001.

Many Holden cooler lines use a quick connect fitting which has a very close tolerance at the radiator end. This tool is specially designed to snap around the cooler line. Simply insert the tool into the fitting to release it, and the line can then be separated by hand.

Avoid use of pick style tools as they can damage the line or the fitting.

  • 3/8" diameter
  • OEM Equiv: J-44827 | AU525

Universal Valve Spring Remover

Universal Valve Spring Remover

This kit has been designed to remove valve springs and valve stem seals on the vehicle without the need to take the cylinder head off. A definite time & money saver.

Ideal for narrow engine bays where space is limited.

This kit is applicable to European, Japanese and US cars. Such as BMW, Ford, Mercedes, Volvo, Toyota, Mitsubishi, VW etc. Especially suitable for Mercedes V6 / BMW V8 engines. However it is not suited to some S63 engines due to their lower positioning.

  • Applications: BMW M52 | M54 | M56 | N42 | N46 | N52 | N62, Mercedes M102 | M103 | M104 | M111 | M112 | M113 | M271 | M272, plus Mitsubishi, Toyota, VAG.

Vacuum Hose Removal Plier

Vacuum Hose Removal Plier

Sharp edge grips tube securely. Smooth jaw pushes off hose. Available separately or as part of the DA9989A hose clamp plier kit.

  • 3 - 13mm hose capacity
  • 0-30mm jaw opening
  • 26mm jaw width
  • Part #G

VAG Diesel Turbo Removal Wrench

VAG Diesel Turbo Removal Wrench

A special wrench for turbo diesels on V6 TDI engines.

  • For 12mm x 12 point bolts
  • 3/8" Sq Drv

VAG Front Engine Sub Frame Bush Tool VAG Front Engine Sub Frame Bush Tool

VAG Front Engine Sub Frame Bush Tool

A comprehensive / specialised kit for servicing the two part engine support steady bar bush that is fitted to the front subframe of certain VAG models. This kit allows for sealing off the side of the aperture to enable easy extraction / insertion of the bushes, as well as allowing this task to be done without removing the subframe from the vehicle.

A time saving workshop tool.

VAG Front Engine Sub Frame Bush Tool VAG Front Engine Sub Frame Bush Tool

VAG Front Engine Sub Frame Bush Tool

A comprehensive / specialised kit for servicing the two part engine support steady bar bush that is fitted to the front subframe of certain VAG models. This kit allows for sealing off the side of the aperture to enable easy extraction / insertion of the bushes, as well as allowing this task to be done without removing the subframe from the vehicle.

A time saving workshop tool.

VAG Intake Manifold Connector Release Tool

VAG Intake Manifold Connector Release Tool

These specialised tools are designed to quickly / safely release the intake manifold pipe connections on a range of Audi / VW direct injection turbo charged petrol engines.

This set includes two different sized release tools.

  • Engines: 1.0L | 1.2L | 1.4L FSI / TFSI
  • Applications: Audi A1 | A3 | Q2, VW Beetle | Golf (13-) | Jetta | Polo | Up!
  • OEM Equiv: T10527

VAG Speed Sensor Release Tool

VAG Speed Sensor Release Tool

A specialised tool designed to quickly and safely release the gearbox input speed sensor (G182) connector. Suits various VAG models.

  • Applications: 6 Speed dual clutch 02E | 7 Speed dual clutch 0BH | 0BT
  • OEM Equiv: T10465

VAG Valve Spring Compressor Tool

VAG Valve Spring Compressor Tool

This tool is used for removing the valve springs on VAG group 4 Cyl 1.8L Turbo 20V petrol engines.

  • Applications: Audi A4 (B5) | VW Passat (B5)
  • OEM Equiv: 3362

Valve Lapper Set

Valve Lapper Set

2 Pce

SKU: DA3018

Valve Lapper Set

A set of valve grinding / lapping sticks with contoured hardwood handles. With four different sized neoprene cups, which are resistant to grease / oil / petrol.

  • 2 grinding sticks - 210mm | 230mm
  • 16x20, 29x35mm dia cups

Valve Spring Compressor

Valve Spring Compressor

A valve spring compressor for overhead cam engines. A universal model with fixed jaws, cam action provides a parallel lift. Automatic locking leaves hands free to continue jobs. Intended for use on OHC engines and a wide range of OHV and CVH engines.

  • Capacity: 75 - 140mm
  • Thread clearance: 150mm

Valve Spring Compressor

Valve Spring Compressor

A valve spring compressor for small / medium OHV engines. A universal model with strong adjustable cam action, parallel lift, and automatic locking.

  • Capacity: 75 - 165mm
  • Throat clearance: 150mm

Valve Spring Compressor Valve Spring Compressor

Valve Spring Compressor

This puller style of valve spring compressor enables valve springs / valve stem oil seals to be replaced without having to remove the cylinder head. The offset jaws easily grip and compress the valve springs.

  • Suitable for use on a wide range of CVH | OHC | OHV engines.
  • Spread: 50mm
  • Reach: 60mm

Valve Spring Compressor Kit

Valve Spring Compressor Kit

This kit is designed to remove & install the valve spring with the cylinder head on or off OHV & OHC petrol or diesel engines. This kit has almost universal application for most engines.

The multi-point adjustable base of this tool bolts securely to the head while the adjustable lever mechanism pivots fromthe beam. Thus compressing the spring quickly by one hand operation.

Fast removal & installation of the spring retaining keeper. This is easily accomplished through the large opening on both sides of the compressing tube.

Valve Spring Compressor Repair Kit

Valve Spring Compressor Repair Kit

A comprehensive service tool kit for installing / removing the valve spring without removing the cylinder head from the engine.

  • Applications: OHC / OHV petrol & diesel engines on a wide range of European / Japanese vehicles.

Welsh Plug Puller

Welsh Plug Puller

SKU: DA3807

Welsh Plug Puller

This puller works on frozen plugs up to 2" (50mm) in diameter. Simply drill a 17/64" hole and screw in the forcing screw. Use with a 5/8" socket or wrench.