Electrical

• T50 Torx bit socket
• 113mm overall length
• 1/2" Sq Drv

A comprehensive tool set for removing alternator freewheel pulleys on a range of Bosch / Magneti Marelli type alternators.

This kit suits a wide range of vehicles including Audi | BMW | Fiat | Ford | Mercedes | Renault | Seat | VW.

• Includes Sockets: M10 Spline | T50 Torx (Bosch) | Bits: Hex - 8mm & 10mm | Spline - M8 & M10 | Torx T40 & T50
• 2x adaptors for Bosch / Magneti Morelli alternators a 1/2" Sq Drv >> hex adaptor, and 2x pulley connectors

Specialised pliers for removing / installing relays and fuse links. Suitable for most late model vehicles, these pliers access hard to reach areas around the corners of the relay or fuse link. Specially coated tips provide firm grip.

• Angled tip
• Jaw opening: 25 - 60mm
• 160mm overall length

A specialised set of sockets which fit most antenna nuts on Chrysler | Ford | Holden | Japanese | VW vehicles.

Special pin sockets for removing and installing bezel nuts when servicing antennas, aerials and remote control mirrors.

Suits Ford, GM, Japanese, and many other models.

Comprehensive non insulated terminal and Anderson plug crimper kit for battery terminal applications.

• Non insulated terminals
• 50 Amp housing / contacts / dust cover / handles / clamps
• Ratcheting crimper (AWG 20-16 | 16-14 | 12-10 | 8
• Cable cutters (cuts up to 38mm2 soft wire)

Air conditioning compressor belt installer for 4.0L | 4.4L V8 engines (without tensioner). Provides a damage free sitting solution.

• Vehicles: BMW | Land Rover | Mini
• Engines: N62
• OEM Equiv: 641040

Retracts the serpentine belt tensioner to assist with belt replacement. 2 small pins spaced 36mm apart. Supplied with locking pin to lock the tensioner.

• Application: Mini Cooper S 1.6L 16V SOHC | W11(R53 series).

A pair of serpentine belt tools for the BMW Mini (07-), including N12 | N14 | N16 | N18 petrol engines. These tools are designed to remove the spring loaded serpentine belt adjuster to allow servicing of the serpentine belts.

These two tools fit all engines.

• 21mm x 12 Point | 30mm x 12 Point
• 568mm OL
• OEM Equiv: 11 6 210
• Applications: R55 | R56 | R57 | R58 | R59 | R60 | R61

An essential tool for installing stretch ribbed belts on BMW 2.0L | 3.0L engines without causing damage.

• Engine codes: M47TUD20 | M57TUD30
• OEM Equiv: 11 0 330

Specialised stretch belt installation kit for BMW N52K (06-10) engines. In these engines, a separate stretch is used to drive the air conditioning pump.

• OEM Equiv: 11 1 240

A special socket for servicing overruning alternator pulleys (OAP) on vehicles with Bosch / Valeo alternators. Used to remove central bolts from the belt pulley (at the alternator) while stopping the pulley from turning.

• T50 drive
• 33 teeth / 17mm hex alternator nut
• 110mm overall length
• 1/2" Sq drive

A two bladed model for RG-58 | 59 | 62 | 6 | 3C | 4C | 5C cable. Suits cables with a diameter from 4.9mm2 to 7.5mm2.

This tool is efficiently designed to make wire stripping quick and easy. The tool can strip and cut wire from 1.13mm (squared) - 6.0mm (squared). It can also be used to crimp insulated / non-insulated terminals.

Designed to remove the crankshaft pulley in order to be able to remove the timing belt. A suitable puller needs to be used with this tool.

• Engine codes: 1.8L EBD | 2.0L ECB, ECC | 2.4L ED1, EDZ
• OEM Equiv: 6792 | 6827

An essential tool for Harley & Caterpillar mechanics.

This tool crimps round barrel contacts, pins and sockets. A built in locator ensures accurate positioning on the pin and socket, for a perfect crimp.

Adjustable pin height locator.

• D-Sub Deutsch 4 way indent crimper
• 0.5-4mm2 | AWG 20-12

This 4 way indent crimper crimps pins, round barrel contacts and sockets. A built in locator ensures accurate positioning of the pin & socket before crimping.

An Essential tool for Caterpillar, Kenworth & Harley mechanics

• Application: AWG 26-20, RS232 D-Sub 35-465
• Full cycle ratchet ensures a high quality, consistent crimp
• Adjustable pin height locator

Widely used by Caterpillar, Harley, Kenworth etc. This kit contains 6 dies for common Deutsch terminals.

• K1: AWG 14/12 (DT / P)
• K2: AWG 10/12 (DT / P)
• K3: AWG 18/16/14 (DT / M)
• K4: AWG 20/18/16 (DT / M)
• K5: AWG 20/18 (DT / M)
• K6: AWG 16/14/12 (DT / P)

A specialised set of three disconnect tools to remove Deutsch terminals from connectors fitted to Caterpillar, Harley Davidson, Kenworth etc.

• 14 | 16 | 20mm blade tools
• Stainless steel slotted tubes

A specialised set of three disconnect tools to remove Deutsch terminals from connectors fitted to Caterpillar, Harley Davidson, Kenworth etc.

• 4, 8, 12, 14, 16, 20mm blade tools + Wedge Removal / Flat Tip screwdriver
• Stainless steel slotted tubes

Updated version with 'serrated' tip for better grip. Designed for disconnecting automotive electrical connectors while avoiding damaging locking tabs.

• Spring loaded, for easy use
• Ergonomic molded handles for comfortable use
• Serrated tip
• 215mm overall length

Updated version with 'sharp tip' tip for better grip. Designed for disconnecting automotive electrical connectors while avoiding damaging locking tabs.

• Spring loaded, for easy use
• Ergonomic molded handles for comfortable use
• Sharp tip
• 185mm overall length

This kit contains four keys which are necessary for the removal of the radio from Ford Focus vehicles.

A popular assortment of glass | mini blade | standard ATS blade fuses packed in a transparent plastic case.

• 360 pcs

• 20A | 30A | 40A | 50A | 60A | 70A | 75A | 80A | 100A

• 3A | 5A | 7.5A | 10A | 15A | 20A | 25A | 30A

• 3A | 5A | 7.5A | 10A | 15A | 20A | 25A | 30A

A handy assortment kit of colour coded heat shrink. Ideal for protecting / insulating wires. Quick and simple to shrink using a heat gun. Supplied in a quality plastic case

• RoHS compliant
• 2 to 9mm diameter
• Shrinks by up to 50% when heated to 125¡

• Adhesive lined inner walls seal against moisture ingress
• 3:1 shrink ratio

• 3:1 Shrink ratio
• Butt connectors
• Ring / spade terminal
• Male / female disconnector

Versatile kit with dies for crimping battery cables, balustrading wire, and swaging.

8T hydraulic crimping force for ease of use.

• Die Sizes: 6, 10, 16, 25, 35, 50 & 70mm² Swaging Die
• Overall length: 320mm

A pack of two optional dies for the ET5114 hydraulic crimper tool. These dies are commonly used for Deutsch crimps.

• #4 crimping die
• #8 crimping die

• Ratcheting crimping tool with laminated steel jaw and insulated grips
• 500 assorted terminals, 50 cable ties & electrical tape

• Spark Plug connector (HJ12-H1)
• Weatherpack terminals (HJ12-H5)
• Non-Insulated terminals (HJ12-B)
• Open Barrel terminals (0.5-6mm 2 ) (HJ12-C)
• Open Barrel terminals (0.1-1.0mm 2 ) (HJ12-C1)
• Open Barrel terminals & D-SUB, V3.5
(0.5?10mm 2 ) (HJ12-H)

A great value pack combining our flameless heat gun, with our popular colour coded heatshrink kit.

• Auto ignition gun
• 2 to 9mm diameter shrink wrap
• Shrinks by up to 50% when heated to 125¡C

This kit includes a variety radio, ignition lock, and instrument cluster removal tools to suit most Mercedes models since 1992.

• Radio removal tools for Mercedes 129 | 140 | 202 | 210 series.
• Ignition lock removal tools for W124 | W126 | W201 series.
• Instrument cluster removal hooks for W107 | W116 | W123 | W124 | W126 | W140 | W201 series.

A time saving tool for turning the idler, to quickly replace the serpentine belt.

• Engine: M270
• Size: Torx T55

Our most comprehensive set of radio release tools allow for the damage free removal of car radios. The set includes a wide range of U hooks, special pentagon and internal hex wrenches.

This is an essential kit for removing car radios.

• Applications include Audi | BMW | Fiat | Ford | Holden | Mercedes | Porsche | VW.
• Fits radios including Becker | Blaupunkt | Clarion | Grundig | JVC | Kenwood | Sony | Panasonic | Pioneer.

Space saving design. Suits many vehicles especially with Blaupunkt, Clarion, Sony systems.

Composite handles allow firm & comfortable grip.

• Handy 2 piece clip design (which protects the tools)
• Easier to grip than regular disconnect tools
• Suits a wide range of vehicles including Audi | BMW | Fiat | Ford | GM | Land Rover | Mercedes.