Brakes
Drive
Points
Socket Type
Style
Type
Vehicle Make
Phoenix Brake Test Strips
Need a simple / fast / accurate way to test brake fluid?
Are your customers asking for a test report to prove the fluid needs changing?
Looking for more service opportunities? Test each car that comes into the workshop...
ests both coolant and brake fuid.
Simply dip a test strip into fluid for 60 seconds.
Patented FASCAR copper testing technology.
Phoenix Brake Test Strips
Need a simple / fast / accurate way to test brake fluid & coolant?
Are your customers asking for a test report to prove the fluid needs changing?
Looking for more service opportunities? Test each car that comes into the workshop...
One double ended strip tests both coolant and brake fluid.
Simply dip a test strip into fluid for 60 seconds.
Patented FASCAR copper testing technology.
- DOUBLE THE SERVICE OPPORTUNITIES
- DUAL BRAKE / COOLANT TEST STRIPS
- PROVIDE CUSTOMERS WITH A TEST REPORT
Phoenix Reverse Brake Bleeder
Pushes fluid up through the brake system.
Professional quality made of cast aluminium / fully rebuildable.
Also capable of performing pressure (top down) and vacuum bleeding.
Includes European adaptor. Plus attachments to fit bleed screws and clutch weep holes.
Phoenix Reverse Brake Bleeder
Obliterate trapped air fast in brake / clutch systems, and get maximum response from your brake systems!
- Reverse brake bleeding injects fluid at the low point. System is bled by forcing air up and out the master cylinder
- Recommended for dry brake / clutch systems
- Versatile - did you know the V-12 can also be used for pressure / suction brake bleeding?
- One person operation
- Attachments included to fit bleed screws / clutch weep holes
- PUSHES FLUID UP. FORCING AIR UP AND OUT.
- FOR PROFESSIONAL BRAKE & CLUTCH BLEEDING.
Phoenix V-5 Reverse Brake Bleeder
Phoenix System reverse brake bleeders are designed to push fluid up through the brake / clutch system. Essential for concentric clutch bleeding.
A great value entry level reverse brake bleeder.
- Simple, 1 man operation.
- Also able to pressure bleed.
- Tested for ABS Systems.
Piston Wind Back Adaptor
Specialised 3 pin piston wind back adaptor for servicing rear brake calipers on vehicles with electronic park brakes.
Electronic park brake mechanisms generally need to be retracted using a scan tool. Once this has been done, this tool is used to reset the caliper pistons to allow new pads to be fitted. The adaptor is designed to be used with a standard windback tool.
- Applications: Renault, Volvo, VAG
- Use with 2 pin windback tool, or 3/8" Sq Drv tool
- 39mm OD | 32mm PCD | 3mm Pin dia
Pressure Brake Bleeder | Hand Operated
Professional one person brake and clutch bleeding. Simply connect the adaptor to the master cylinder, fill the container with brake fluid, and pump. No external power source is required.
- 2.8 litre capacity
- Supplied with 44mm adaptor that suits many European vehicles
- Other adaptors available sepearately
Ratcheting Brake Caliper Press
Updated model with extra plate to fit virtually all passenger / commercial vehicles. Ratcheting handle with reversing switch makes it convenient to use in any position, and also centrally distributes force to prevent piston misalignment.
- Works on most single / multi piston calipers.
- Size range: 1-9/16" - 2-5/8"
- Includes magnetic 7" extended adaptor plates to suit multi piston calipers on heavy duty vehicles.
Rear Disc Brake Piston Cube
This tool restores the brake caliper piston to its original resting position when servicing disc brakes. Suits most popular vehicles.
- 6 different configurations
- Use with 3/8" Sq Drv tool
Rechargeable Brake Fluid Tester
This pen style tool tests the percentage of water in brake fluid, and tests all essential profiles for modern brake fluids. Please refer to the DOWNLOAD tab for a detailed instruction sheet.
- Colour coded LEDs show water level
- DOT 3 | DOT 4 | DOT 5.1
- Not suitable for silicone based DOT 5.0
- Rechargeable Li-ion battery
Spline Bit Socket | M14 | 100mm
A professional quality spline (triple square) bit socket made from premium S2 steel for added durability. Spline fasteners are widely used in automotive applications, especially VAG rear brake caliper bolts, and ball joints on VW LT, Transporter and Touran. Part of the Endeavour range of specialty fastening tools.
- M14 Spline bit socket
- 100mm overall length
- 1/2" Sq Drv
Spline Bit Socket | M14 | 100mm
A specialised spline bit socket for use on ball joints on VW LT | Transporter | Touran, and rear caliper bolts on VW Passat and Audi A3. Part of the Endeavour Tools range of specialised bit sockets.
- M14 Spline bit socket
- 100mm overall length
- 1/2" Sq Drv
Spline Bit Socket | M14 | 100mm
A professional quality spline (triple square) bit socket made from premium S2 steel for added durability. Spline fasteners are widely used in automotive applications, especially VAG rear brake caliper bolts, and ball joints on VW LT, Transporter and Touran. Part of the Endeavour range of specialty fastening tools.
- M14 Spline bit socket
- 100mm overall length
- 1/2" Sq Drv
Truck & Tractor Brake Riveter
A handy tool for driving brake rivets on trucks / tractors.
Simply secure the riveting jig in a vice. Select the appropriate punch size and anvil to suit the brake rivet. Hold the brake shoe and lining in one hand, and then fasten the rivet using a hammer.
Also suitable for older cars fitted with rivetted brake linings.
- 8mm | 11mm roll punches
- Star punch
Truck Air Brake Cage Socket
Specialty impact socket to loosen truck cage bolt to unlock air brakes PLUS remove air brake booster.
- 19mm | 6 point
- 163mm overall length
- 1/2" Sq Drv
Truck Airline Disconnect Kit
Disconnects quick connect push-in connectors on truck air systems. Double ended. 230mm OL.
- Sizes: 1/4" | 3/8" | 1/2" | 5/8"
Truck Brake Caliper Socket
A specialised socket for air disc brake caliper adjustment. This socket suits Bendix ADB 22X | ADB 225 | SN6 | SN7 | SK7 air disc brake calipers.
- 11 point
- 30mm length
- 3/8" Sq Drive
Universal Brake Bleeder Adaptor | Right Angle
This brake bleeder adaptor is designed for use with our pressure brake bleeder (ETWH505H). With adjustable wings, and a conical rubber plug, this brake bleeder is designed to fit round master cylinders with a 28mm - 70mm diameter.
Universal Adaptor | Large
A master cylinder adaptor for universal use for vehicles with a round reservoir. Designed for use with pressure brake bleeders.
- Suits round reservoirs
- Nitto style connector fitting
- 2" - 3-3/8" (50-85mm)
Universal Adaptor | Small
A master cylinder adaptor for universal use for vehicles with a round reservoir. Designed for use with pressure brake bleeders.
- Suits round reservoirs
- Nitto style connector fitting
- 1-3/16" - 2-3/16" (30 - 55mm)
Universal Round Brake Bleeder Adaptor
This brake bleeder adaptor is designed for use with our pressure brake bleeder (ETWH505HA). With adjustable wings, and a conical rubber plug, this brake bleeder is designed to fit round master cylinders with a 28mm - 70mm diameter.
- Suits round cylinders with 28 - 70mm diameter
- Holds pressure up to 3.5 bar / 50 PSI
- Adjustable wings to fit various brake reservoir filler neck sizes
- 90 degree rotating coupling
- 28 - 70mm dia
Universal Twin Disc Brake Spreader
This specialised tool is designed to compress brake pistons to allow for brake pad replacement. Swivel end caps allow for extra torque for removing stubborn pistons.
- Universal application
- Heavy duty pushing plate 3/16" (5mm)
- Fine thread forcing screws
VAG Brake Caliper Socket Set
An essential set of popular sizes of brake caliper sockets used on Audi / VW / Porsche vehicles.
These sockets are specialised 7 Point & 10 Point sockets with a range of different diameters (which are measured from the inside rim of the sockets).
- 9mm | 10 Point - Audi Q7 / Touareg / Porsche
- 11.5mm | 10 Point - Porsche
- 14mm | 7 Point - Audi Q7
- 15mm | 10 Point - Audi Q7 / Porsche
- 20mm | 10 Point - Porsche Cayenne
- 22mm | 7 Point - Audi S5
VAG Brake Caliper Wind Back Socket | 5 Point
A specialised socket for winding back the brake calipers on late model VAG vehicles, fitted with electronic solenoids (in order to be able to replace the solenoid).
- Applications: VW Golf MKVIII
- 5 point | 3/8" Sq Drv
- OEM equiv: T10621
VAG Brake Servo Release Kit
A specialised kit of tools designed to release the brake servo push rod from the brake pedal on a wide range of VAG vehicles.
- OEM Equiv: T10159 | T10060A | T10189 | T40136
- 4 Pce kit
Wheel Bolt Pattern Gauge Tool
Measures most common 4 | 5 | 6 | 8 lug bolt patterns. Can be used to measure a wheel or turned over to measure the studs on a vehicle.
- 4 lug (98 - 140mm)
- 5 lug (100 - 150mm)
- 6 lug (114 - 140mm)
- 8 lug (170mm)