Brakes

A very convenient tool to use in conjunction with the ETWH505HA pressure brake bleeder. Use the wrench to open the nipple. Used brake fluid then flows through the hose (into any convenient disposal bottle). The one way valve prevents air from reentering the system.

• 10mm (6 point) brake bleeder wrench
• Silicone hose, with one way valve

This file is designed for removing corrosion, road dirt, brake dust etc from calipers / carriers when replacing brake discs / pads. The reverse blade also functions as a scraper for harder to remove residue.

• Flat 155mm parallel blade with diagonal coarse grooves to reduce clogging.
• Extra slim 10mm style, especially useful on Japanese vehicles with narrow caliper carriers.
• Double sided for easy use.

A heavy duty caliper windback tool to return brake caliper pistons to their original position when changing brake pads.

The extra large forks are designed to push back pistons simultaneously, on most vehicles with 4 piston calipers.

• Pad size: 7cm x 11.8cm

A special impact socket for brake pad locating bolts on Audi S5 brake calipers. Part of the Endeavour Tools range of brake caliper bits / sockets.

• Application: Audi S4 (8K) | S5 (8T) | SQ5 (8R) | Q7 (4M) | Q8 (F1)
• 22mm dia | 7 Point (AS-22)
• 48mm OL
• 1/2" Sq Drv

10 Point impact socket for brake caliper service on Porsche vehicles. Part of the Endeavour Tools range of brake caliper bits / sockets.

• 10 Pt impact socket
• 11.5mm dia (measured from inside wall of the socket)
• 50mm overall length
• 1/2" Sq Drv

A set of 9 essential sockets / bits to service brake calipers on German vehicles.

• 1/4" Sq Drv male hex bit: 9mm x 19mm
• 3/8" Sq Drv male hex bits: 7mm x24mm | 7mm x 65mm | 7mm x 92mm | 8mm x 24mm | 9mm x 50mm | 11mm x 100mm
• 1/2" Sq Drv female sockets: 11.5mm 10Pt x 50mm (Porsche) | AS22 7 Pt x 48mm (Audi S5)

• 10mm | 6 point hex socket
• 12mm hex drive

• 11 Point socket
• 12mm hex drive

A specialised 10 point socket for servicing brake caliper bolts on Porsche vehicles. Part of the Endeavour Tools range of brake caliper sockets.

• 11.5mm 10 Point socket
• 50mm overall length
• Chrome Moly
• 1/2" Sq Drv

This 11mm hex bit socket was originally used for diesel injector clamp bolts. On recent models, the application range has been extended to include brake caliper mounting bolts on Ford Focus | Mercedes ML vehicles (2016 onwards).

• 11mm hex bit socket
• 100mm OL
• S2 steel
• 3/8" Sq Drv

A specialised 7 point socket for servicing brake caliper bolts on Audi S5 vehicles. Part of the Endeavour Tools range of brake caliper sockets.

• Audi S5 brake calipers
• 22mm | 7 Point socket x 48mm
• Chrome Moly
• 1/2" Sq Drv

A specialised brake caliper socket for caliper retaining screws on Audi Q7 | S4 models. See also ET0409 for a similar socket for S5 vehicles (22mm dia).

• 7 Point socket
• 14mm dia
• 1/2" Sq Drv
• 50mm overall length
• Chrome Moly impact grade construction

Short series hex socket for brake caliper removal on Mercedes | Audi vehicles in particular.

Part of the Endeavour Tools range of brake caliper sockets.

• 7mm hex socket
• 24mm OL
• Applications: Audi TT (2007-), A4 (2001-), A6 ( 2005- ), A8 ( 2003-) | Mercedes C-Class
• 3/8" Sq Drv

A 7mm hex bit socket for use on brake calipers where a standard length bit will not fit due to limited access.

Part of the Endeavour Tools range of brake caliper bits / sockets.

• 7mm hex bit socket
• 65mm OL
• Applications: BMW E36 chassis, Ford Fiesta | Mondeo, plus a wide range of other vehicles.
• 3/8" Sq Drv

A 7mm hex bit socket for use on brake calipers where a standard length bit will not fit due to limited access.

Part of the Endeavour Tools range of brake caliper bits / sockets.

• 7mm hex bit socket
• 92mm OL
• Applications: BMW E36 chassis, Ford Fiesta | Mondeo, plus a wide range of other vehicles.
• 3/8" Sq Drv

• 8mm | 6 point hex socket
• 12mm hex drive

Short series hex socket for brake caliper removal on Mercedes | Audi vehicles in particular.

Part of the Endeavour Tools range of brake caliper sockets.

• Applications: Audi TT (2007-), A4 (2001-), A6 ( 2005- ), A8 ( 2003-) | Mercedes C-Class
• 8mm hex socket
• 24mm overall length
• 3/8" Sq Drv

• 8mm square socket
• 12mm hex drive

Special 10 Point impact socket for servicing front / rear brake calipers. Suitable for 6 piston fixed brake calipers on Audi Q7 | Porsche Cayenne | VW Touareg.

• Size: 9mm diameter | 10 Point
• Length: 30mm
• Drive: 3/8" Sq Drv
• Chrome Moly

A low profile hex bit for use on brake calipers. This low profile bit is specifically required for Mercedes ML320 vehicles.

Part of the Endeavour Tools range of brake caliper bits / sockets.

• 9mm hex socket
• 19mm OL
• Chrome Moly
• Application: Mercedes M320.
• 1/4" Sq Drv

A special bit socket for brake caliper removal on Mercedes | BMW | Jaguar XF. Part of the Endeavour Tools range of bit caliper bits / sockets.

• 9mm hex bit socket
• 50mm OL
• S2 steel
• 3/8" Sq Drv

A set of 5 Pentagon sockets / bit sockets that suit most Bendix / Girling brakes (and Nissan fuel pump / Perkins injectors (10mm)). Their principal application is the disassembly of brake calipers.

• Female pentagon sockets: 10 | 12.5 | 14 | 19mm
• Male pentagon bit socket: 10mm
• 1/2" Sq Drv

Special truck brake caliper sockets for repairing SAF | NFZ | Knorr brake caliper systems.

• Sizes: Hex: 8mm | 10mm, Square: 8mm, 11 Point
• 12mm hex drive

For brake caliper guide bolts in the wheel bearing housing (extendable for OPEL Astra G)

A repair set for pulled out / damaged internal threads of brake caliper guide bolts, especially for VW Golf IV, Beetle, Audi A3.

Includes drilling stereotype extends set for Opel Astra G.

This caliper wind back kit includes two wind back forcing units - right hand and left hand - plus a selection of adaptors to suit most vehicles.

A master brake caliper windback kit with left / right hand thrust bold assemblies and a comprehensive range of vehicle adaptors.

An essential kit to help prevent damage to pistons and seals.

• Suitable for push back and wind back brake pistons
• 37 pce kit

This rewind tool has a powerful internal spring which applies firm pressure to the piston to ensure piston mechanism is wound back as you turn the handle.

The adjustable adaptors provide almost universal application. Suitable for both left and right hand thread brake calipers and two / three pin brake caliper pistons.

• Main body: 100mm
• T-Bar (100mm) / Reaction plate.
• Magnetic 2 pin adaptor (4mm pin dia / 25mm) - fits any standard rewind adaptor.
• Adjustable 2 pin (4mm pin dia / 23-27mm) - for electronic park brakes
• Adjustable 3 pin (4mm pin dia / 22-33mm) - for common brake caliper applications

A high quality 3 leg honing tool for deglazing cylinder bores, and other similar applications such a brake calipers, and master / slave cylinders.

• Bore capacity: 20-64mm
• 28mm medium grit stones

A metal body tool for accurately measuring brake disc thickness without needing to remove the wheel. Suitable for use on most motorcycles, cars and commercial vehicles.

• 0 - 45mm range
• Metric scale with 1mm graduations
• Spring action plunger, for quick operation

Brake disc measurement tool, that fits easily on most vernier calipers (not supplied). No need to remove the wheels or strip the brake first.

A time saving tool!

• Measures brake disc thickness with wheels still on vehicle
• Quote accurately, without stripping brakes / removing tyres

Accurately measure brake disc diameter without removing wheels. Quick identification of the brake system. Saves time!

• Suits most passenger / light commercial vehicles
• Range: 200 - 400mm
• Reach: 265mm

This tool is designed to assist with quickly / safely removing the brake disc. Using this tool reduces the vibration impact on the wheel bearing, electronic sensors, suspension etc compared to traditional methods. Auto adjusting jaws allow for almost universal application.

Please ensure that nuts are attached to the hub to prevent the brake disc from falling down when being removed.

• Adjustable spring loaded legs.
• Operating range: 170 - 400mm
• 120mm depth
• Always ensure that the threaded force screw is lubricated with Moly grease.

Accurately test brake fluid performance based on its boiling point. This is the most professional approach to measuring brake fluid quality. Quick / simple test, using vehicle's 12V battery as the power source.

This pen style tool tests the percentage of water in brake fluid, and tests all essential profiles for modern brake fluids. Please refer to the DOWNLOAD tab for a detailed instruction sheet.

• Colour coded LEDs show water level
• DOT 3 | DOT 4 | DOT 5.1
• Not suitable for silicone based DOT 5.0
• Battery included

Accurately test brake fluid based on its boiling point.

One touch printing for hardcopy test reports to bluetooth printer.

Ideal for roadworthy testing.

• DOT 3 | DOT 4 | DOT 5.1

These colour coded gauges help identify brake lining that may require replacement. Quickly assess brake pad thickness on disk brakes, by inserting the blade between the brake disc and brake pad.

Traffic light like colour coding - Green / Go, Yellow / Caution, Red / Replace

• Colour coded metal gauges
• Measuring range: 2mm - 12mm

A specialised brake wear gauge for use on heavy vehicles to check the thickness of remaining brake pad material.

An offset design allows for the blades to be inserted between the brake disc and the brake pad backing plate so that the pad thickness can be measured without the pad needing to be removed from the vehicle.

• 9 blades marked in both metric & imperial units. Range: 6 - 22mm (0.2362" - 0.8661").
• Always consult manufacturer's recommended measurements for brake pad replacement; many duty manufacturers recommend pad replacement at around 5mm.

Quickly / simply measure trending brake thickness without removing any components.

Place the end of this lightweight gauge against the brake disc surface; slide back the measuring peg until it stops against the back plate of the brake pad. Read off the thickness of the pad material in mm.

• Colour coded green | yellow | red traffic-light symbol as to whether you need to replace the brake pads.
• Made from lightweight aluminium.