Air Powered CV Boot Install Tool

Air Powered CV Boot Install Tool

This specialised tool installs CV boots without the need to first remove drive shafts from the vehicle, or the CV joint from the drive shaft.

Use with standard shop air. Not suitable for plastic CV boots.

  • Suits CV joint dia: 25-110mm
  • 1/4" BSP air inlet size
  • 72 - 113 PSI working pressure
  • Replacement rubber boot available (ET4151-RB)

Airbag Release Tool

Airbag Release Tool

SKU: ET0497

Airbag Release Tool

A special tool for removing the air bag module from the steering wheel.

  • Removes airbag module on Ford, Holden, Mercedes vehicles.

Airbag Removal Kit

Airbag Removal Kit

A specialised kit for the safe removal of airbags on most vehicles, including BMW | Holden | Mercedes | Renault | VAG. Includes a range of 1/4" Sq Drv hex and Torx bit sockets.

Airbag removal tools

  • 99-04 VW Passat | Polo | Golf | Bora | A4 | A6 (2x)
  • VW Golf | Beetle & Seat (2x)
  • VW Golf (98-04) | Passat (97) | Bora (99)
  • VW Passat (00)
  • VW Passat | Jetta | Golf | Beetle (99-04)

1/4" Sq Drv bit sockets

  • Torx T25: BMW
  • Torx T30: Audi | Holden | Renault | VW
  • Torx (Sec) T25-H: BMW
  • Torx (Sec) T30-H: Audi | BMW | Holden | Mercedes
  • Hex 5mm: Audi

Airbag Removal Kit Airbag Removal Kit

Airbag Removal Kit

14 Pce

SKU: ET5127VP

Airbag Removal Kit

A specialised kit for the safe removal of airbags on most vehicles, including BMW | Holden | Mercedes | Renault and VAG vehicles. Includes a range of 1/4" Sq Drv hex and Torx bit sockets.

  • Includes additional removal tools for Ford and VE Commodore airbags.

Airbag Removal Tool Airbag Removal Tool

Airbag Removal Tool

Specialised tool for the correct release of the driver's side front SIR inflator module from the steering wheel. Insert the tool into the access hole behind the steering wheel, and press the tool towards the front of the vehicle to release the retaining clips. Rotate the steering wheel 180 degrees to expose the other access hole, and repeat the process.

It is important that correct tools are used to safely remove airbags.

  • Application: VE Commodore
  • OEM Equiv: EL-48508

Ajax Magnetic Bit Holder

Ajax Magnetic Bit Holder

This magnetised bit holder holds standard 1/4" hex insert bits. Features a soft grip rubber handle for comfortable use.

  • Holds 1/4" hex drive insert bits
  • Blade length: 100mm | Overall length: 205mm

Ajax Ratcheting Breaker Bar

Ajax Ratcheting Breaker Bar

Professional quality 18" breaker bar.

Replacement heads available.

Ajax Ratcheting Breaker Bar

Ajax Ratcheting Breaker Bar

Professional quality breaker bar with ratcheting head. The ratcheting head has a three way mechanism - lock / right / left, and is rated to a maximum torque of 1,000Nm.

Made from heat treated drop forged CrV steel with a mirror chrome finish.

  • 24" / 600mm long
  • 1/2" Sq Drv

Ajax XL Wrench Set

Ajax XL Wrench Set

Imperial (6 Pce)

SKU: LSBM-6IMP

$259.00

Ajax XL Wrench Set

Extra long double box wrench set designed for accessing hard to reach areas. Mirror chrome finish. Made from durable 6140 alloy steel.

Contains six imperial size wrenches.

  • 1/4 x 5/16
  • 3/8 x 7/16
  • 1/2 x 9/16
  • 5/8 x 11/16
  • 3/4 x 7/8
  • 13/16 x 15/16

Ajax XL Wrench Set

Ajax XL Wrench Set

Metric (6 Pce)

SKU: LSBM-6

$259.00

Ajax XL Wrench Set

Extra long double box wrench set designed for accessing hard to reach areas. Mirror chrome finish. Made from durable 6140 alloy steel. Zero degree offset.

Contains six metric size wrenches.

  • 8x10
  • 12x14
  • 13x15
  • 16x18
  • 17x19
  • 22x24

Alfa / Ford Timing Kit

Alfa / Ford Timing Kit

A diesel engine timing overhaul kit for Fiat / Ford / GM vehicles fitted with a 1.3L diesel 16v engine.

  • Includes crankshaft pulley flange holding tool, timing chain tensioner tool, and camshaft holding tool

Alfa | Fiat Timing Kit Alfa | Fiat Timing Kit

Alfa | Fiat Timing Kit

A specialised timing kit for Fiat's new 1.3L JTD multi jet 16V diesel chain driven engine. This kit contains all necessary tools to check and adjust the camshaft timing, service the cam chain and perform complete engine rebuilds whilst maintaining correct timing.

  • Applications: Alfa Romeo Mito, Fiat 500 | Grande Punto | Punto, Suzuki Swift
  • Engine codes: 169A1.000 | 199A3.000 | D13A

Alfa Tensioning Tool

Alfa Tensioning Tool

For the correct tensioning of the balance shaft belt fitted to Twin Spark 2.0L engines.

  • Applications: 145 | 1467 | 156 | GTV | Spider
  • Engine codes: 162.01 | 323.01 | 323.10 | 672.04

Alfa Timing Kit Alfa Timing Kit

Alfa Timing Kit

Position camshaft setting plates in place of the bearing caps to lock camshaft in timed position.

Kit includes camshaft timed locking blocks & balance shaft belt tensioner adjusters. Please note that TDC positioning tools are also required, but not included in this kit.

  • Purple plates: 1.4L | 1.6L
  • Blue plates: 1.8L | 2.0L

Alfa Timing Kit

Alfa Timing Kit

A specialised timing kit for the 1.75 TBi belt driven engine fitted to a range of Alfa vehicles since 2009.

  • Engine codes: 939B1 | 940A1

Alfa Variator Socket

Alfa Variator Socket

1.4L

SKU: ET1083A-25

Alfa Variator Socket

For servicing the camshaft variator on Twin Spark 1.4L 16v engines. This tool is designed to be mounted on the inlet camshaft to control the variable valve timing.

  • 1/2" Sq Drv
  • OEM Equiv: 1 852 161 000

Alternator Bit Socket T50 Torx | 113mm OL

Alternator Bit Socket T50 Torx | 113mm OL

  • T50 Torx bit socket
  • 113mm overall length
  • 1/2" Sq Drv

Angle Tip Relay & Fuse Pliers

Angle Tip Relay & Fuse Pliers

Specialised pliers for removing / installing relays and fuse links. Suitable for most late model vehicles, these pliers access hard to reach areas around the corners of the relay or fuse link. Specially coated tips provide firm grip.

  • Angled tip
  • Jaw opening: 25 - 60mm
  • 160mm overall length

Angled Chuck Dial Tyre Gauge

Angled Chuck Dial Tyre Gauge

An ideal gauge for checking tyre pressure on passenger cars. Supplied in a protective case.

A professional quality unit which is calibrated to the ANSI B standard.

  • 5-60 PSI (20-400kPa)
  • Angled Chuck
  • Deflate control
  • High quality diaphragm type gauge

Angled Head Parts Washer Brush Angled Head Parts Washer Brush

Angled Head Parts Washer Brush

This angled flow thru parts cleaning brush is designed for parts washing sinks with circulating solvent systems. A continuous stream of solvent is delivered through the whole bristle head not just through the centre.

  • Suits most parts washers
  • 12" (305mm) overall length

Angled Hose Clamp Plier Set

Angled Hose Clamp Plier Set

Made from a lightweight / durable plastic, these angled tip pliers are designed to shut off / restrict flows in a wide range of automotive applications. For instance brake / fuel / heater / vacuume hoses.

  • 3 pce set (155mm | 165mm | 225mm)
  • Special rounded jaw design to avoid damaging hoses
  • Ring lock holds the pliers in desired position.

Angular Torque Gauge

Angular Torque Gauge

SKU: DA7356

Angular Torque Gauge

Measures angle of rotation following pre-torque adjustment. 0-360¡ measurement range in 2¡ increments. Rotate housing to zero gauge.

  • 1/2" Sq Drv

Antenna Nut Socket Set

Antenna Nut Socket Set

A specialised set of sockets which fit most antenna nuts on Chrysler | Ford | Holden | Japanese | VW vehicles.

Antenna Nut Socket Set

Antenna Nut Socket Set

Special pin sockets for removing and installing bezel nuts when servicing antennas, aerials and remote control mirrors.

Suits Ford, GM, Japanese, and many other models.

Anti Zap Surge Protector

Anti Zap Surge Protector

This surge protector is designed to protect on-board electronics from the voltage spikes that may occur while employing electric power from an external source for fast starting purposes (battery connected to another vehicle or booster, or when welding).

Connect the two clamps to the battery poles. The red light indicates operating voltage (12V/24V). The buzzer sound indicates the presence of voltage spikes that the surge protector is dispelling.

ATF Transmission Filler Adaptor Kit

ATF Transmission Filler Adaptor Kit

Five new adaptors for VAG / Honda / Nissan & Hyundai

ATF Adaptor | Audi DSG 7 Speed ATF Adaptor | Audi DSG 7 Speed

ATF Adaptor | Audi DSG 7 Speed

A specialised twist type ATF adaptor for refilling Audi DSG transmissions that are not fitted with a dipstick.

Made from 6-6 Nylon material providing a lightweight, yet durable solution.

  • Applications: Audi A4 (15-20) | A5 (16-20) | A6 (10-20) | A7 (10-20) | Q5 (08-20)
  • 7 speed dual clutch gearboxes
  • OEM Equiv: VAS 6617/12

ATF Transmission Filler

ATF Transmission Filler

Designed for Honda vehicle with automatic transmission. Small end provides deep and narrow access.

  • Bar dia: 10mm
  • Bar length: 430mm
  • Material: Aluminium bar | PVC tube

Bonus
ET4088-21
ATF Transmission Filler

ATF Transmission Filler

Manual Type

SKU: ET4088

$339.00

ATF Transmission Filler

Manual type pressure tank to refill ATF on automatic transmissions without a dipstick. Includes 20 adapters for most common vehicles.

Tank with 6 litre / 1.5 gallon capacity, suitable for most transmissions - Audi, Ford, Holden, Infiniti, Mercedes, Nissan, Toyota, VW, and Volvo.

Specially designed tank base for feet to step on to stabilise the tank while pumping.

  • Includes 20 adaptors

ATF Transmission Filler Adaptor Kit ATF Transmission Filler Adaptor Kit

ATF Transmission Filler Adaptor Kit

Standard ATF adaptor kit that is supplied with the ET4090A ATF Filler kit. Adaptor kit contains 10 adaptors for popular vehicles.

An additional 5 optional adaptors are available in the ET4092 kit.

  • 10 adaptors

ATF Transmission Filler Adaptor Kit

ATF Transmission Filler Adaptor Kit

Comprehensive adaptor kit for the ATF transmission filler. This kit includes 15 adaptors for popular vehicles including VW CVT / DSG transmissions.

This kit incorporates the 10 standard adaptors supplied with the ET4090A kit, plus five new additional adaptors (which are available separately in the ET4092 adaptor kit).

  • For use with ATF filling kits, such as our ET4088 / ET4090A.

ATF Transmission Filler Adaptor Kit

ATF Transmission Filler Adaptor Kit

A comprehensive adaptor kit for use with ATF transmission fillers. Please see the download link for a full list of adaptors supplied.

These adaptors are designed for use on automatic transmissions without a dipstick.

  • Includes the latest adaptor for VAG DSG 7 speed.

NEW
Audi / VW Crankshaft Seal Installer V6 | V8

Audi / VW Crankshaft Seal Installer V6 | V8

A specialised crankshaft seal installation tools, for certain Audi V6 / V8 engines, to renew the PTFE crankshaft seal.

  • OEM equiv: T40048A

Audi Camshaft Turning Socket Audi Camshaft Turning Socket

Audi Camshaft Turning Socket

This camshaft turning socket is used to adjust the variable valve timing on the exhaust side camshaft to the basic position. Suits Audi 3.0L V8 40V petrol engines.

  • Application: Audi S4
  • Engine code: BBK
  • 3/8" Sq Drv

Audi Crankshaft Turning Tool

Audi Crankshaft Turning Tool

This kit provides a comprehensive solution for safely turning crankshafts on both Audi V6 | V8 petrol engines.

This kit combines two separate OEM tools into the one kit.

  • Applications: 2.5L | 2.8L petrol engines (from approx 2010) on A6 | A7 | A8 | RS4 | RS5 | RS6 | RS7 | S6 | S7 | S8.
  • OEM Equiv: T40257 | T40272

Audi DSG ATF Filling Tool

Audi DSG ATF Filling Tool

A new addition to the Endeavour Tools range of transmission filling tools. This specialised adaptor is designed for newer gearboxes that have a plastic fill plug.

  • Applications: Audi A4 (15-20) | A5 (16-20) | A6 (10-20) | A7 (10-20) | Q5 (08-20)
  • 7 speed dual clutch gearboxes
  • OEM Equiv: VAS 6617/12