Blow Guns

The Jet Washer is a powerful washing gun which allows you to wash effectively without damaging the surface with high pressure. By using a combination of compressed air and water, the ideal conditions for washing where more power is needed than a common water supply can provide, are given. The Jet Washer is designed to allow operators to come close without getting wet. There is no splash back.

By using the adjustments for both air and water flow, the Air Boy Jet Washer can easily be set for the requested output. Furthermore it is possible to turn off the water directly on the washing gun. Additionally the built-in swivel allows the connected water hose to rotate freely around the washing gun. The water can be connected wither by using the supplied nipple (1/2 /¿13 mm) that fits most common water couplings or by using the built in 3/4 GHT water hose thread.

The Air Boy Jet Washer comes as a standard with a wide washing nozzle, which easily can be changed for other nozzles - e.g. the Jet Flusher nozzle.

• Powerful washing gun with wide washing nozzle.
• No splash back. Great mobility with built in swivel.
• Powerful washing guns that clean effectively without damaging the surface with high pressure.
• Combines compressed air and water. Safer than high pressure blasting.
• Both air and water flow are adjustable.
• Nozzles are interchangeable and replaceable.
• Connects to standard water connectors.

Replacement metal ring for Air Boy plastic nozzle cleaning guns.

• Suits 124142130 / 124142135

The Air Boy protective shield helps increase the safety of working with our blowguns. This shield fits all Air Boy blowguns with an 8mm except Air Boy SUPER Silent. The shield protects the operator against back splash of chips, fluids and similar. It is a great supplement for your Air Boy blowgun.

• 80mm dia.
• Fits all Air Boy blow guns (except SUPER silent Air Boy).
• Shield only (blow gun available separately).

A safety blowgun equipped with automatic pressure reduction. If the tip is blocked, the air pressure will automatically be reduced to a lower pressure that fits the blowgun better in the blocked situation. Thereby, the blowgun can still be used in to some extend if it is blocked. This will also avoid damaging the blowgun.

These safety blowguns are available with either a bent or a straight pipe and is available with an air pressure reduction to max. 2.0 bar or 3.5 bar.

• Bent pipe blow gun
• 2.0 Bar pressure regulation when tip blocked
Maximum 16 bar pressure

A safety blowgun equipped with automatic pressure reduction. If the tip is blocked, the air pressure will automatically be reduced to a lower pressure that fits the blowgun better in the blocked situation. Thereby, the blowgun can still be used in to some extend if it is blocked. This will also avoid damaging the blowgun.

These safety blowguns are available with either a bent or a straight pipe and is available with an air pressure reduction to max. 2.0 bar or 3.5 bar.

• Straight pipe blow gun
• 2.0 Bar pressure regulation when tip blocked
Maximum 16 bar pressure

Rubber tip for Air Boy blow guns with an 8mm diameter pipe. Simply push onto the end of any Air Boy blow gun.

• Suits all Air Boy blow guns with (standard) 8mm dia pipe.
• Ideal to avoid scratching sensitive surfaces, or for blowing out small diameter pipes.

This rubber tip blow gun takes our standard 124140101 blow gun, and combines our +Lock rubber tip to provide a versatile rubber tipped blow gun.

This rubber tipped blow gun is ideal for cleaning delicate surfaces, or blowing out small diameter pipes.

• The +Lock rubber tip can be simply removed / replaced by lifting the quick lock lip.

Removeable rubber tip. Connector actively locks on - won't come off until collar is lifted. 35mm dia is suitable for flushing larger hoses.

• Suitable for all Air Boy blow (and other) guns with an 8mm dia pipe.
• Actively locks onto the blow gun pipe.
• Non-marring rubber surface protects against scratching delicate surfaces.

• Air flow cuts off when nozzle depressed
• 8mm bent pipe
• Low level noise 74dB (8bar), 72dB (6bar)

With a low noise level, our Silent Air Boy¨ is ideal for you, who wants less noise during work.

The blowgun is at the same time unblockable, which ensures that the airflow continues through the sides of the pipe, if the tip is blocked.

• Non block tip prevents ÒDead Hand"
• Noise suppressor meets OH & S requirements
• 74 dB at 8 bar
• 72 dB at 6 bar

The Silent Air Boy¨ combines all the best features of our blow guns. It is silent with only 74 dB at 8 bar and complies with OSHAs and EU's requirements in regards to noise level. The construction of the nozzle ensures that the nozzle is unblockable and therefore complies with OSHA STD 1-13.1 requirements.

The ergonomic design is a classic in itself. We use the compressed air to ease the activating of the handle making it easy, accurate and simple to operate.

The Silent Air Boy¨ is produced in an impact-resistant acetal plastic (POM).

• Maximum 16 Bar pressure
• 260 l/min @ 8 Bar
• 74dB @ 8 Bar

• Pipe length: 100mm
• Pipe dia: 8mm
• Inlet size: 1/4" BSP

A compact, all plastic blow gun allowing it to be used in areas where metal components would otherwise be a problem.

This push fit style fitting connects onto the end of any standard Air Boy blow gun converting the gun into a super silent version.

The nozzle restricts airflow to 330 litres / minute while also reducing the noise of the blow gun (meets OSHA).

The push fit style design allows the nozzle to be easily removed by simply lifting up the collar.

An optional nozzle for use with the Air Boy range of thrust guns. This nozzle has holes on the side, providing high volumes of airflow at 90 degrees to the pipe.

This nozzle is ideal for blowing out filters. This nozzle is provided with the 124140009 thrust gun, and is available separately for the other thrust guns.

A replacement THRUST nozzle for the Air Boy range of high airlflow THRUST blow guns. This nozzle increases the airflow by 100% due to the venturi principle. The nozzle is also unblockable, as the airflow can escape from the size if the tip becomes blocked.

• 52mm overall length

Removeable rubber tip. Connector actively locks on - won't come off until collar is lifted. Venturi nozzle offers no block safety functionality, and increased air flow.

• Fits all standard Air Boy blow guns, with 8mm diameter pipe.
• Made in Denmark.

Versatile braided recoil hose fitted with an Air Boy blow gun, and 1/4" male connector (which in turn can be fitted with any style of 1/4" female coupler).

Ideal for blowing down work places / blowing out truck cabins.

• 5m braided recoil hose
• Air Boy 124140101 blow gun