Air Boy Protective Shield

Air Boy Protective Shield

The Air Boy protective shield helps increase the safety of working with our blowguns. This shield fits all Air Boy blowguns with an 8mm except Air Boy SUPER Silent. The shield protects the operator against back splash of chips, fluids and similar. It is a great supplement for your Air Boy blowgun.

  • 80mm dia.
  • Fits all Air Boy blow guns (except SUPER silent Air Boy).
  • Shield only (blow gun available separately).

Air Boy Recoil Hose 8mm OD x 3.5m

Air Boy Recoil Hose 8mm OD x 3.5m

These nylon (PA12) hoses are often used in environments where a slightly more rugged compressed air hose is required. The hose is very resistant to temperatures and pressure and at the same time it has a good ability to maintain its spiral shape. Withstands continuous sunlight.

  • Material: Polyamid 12 (PA12)
  • Working pressure: Max 25 bar at 23 degs C
  • Temperature range: -40 degs C to 60 degs C

Air Boy Regulated Blow Gun Air Boy Regulated Blow Gun

Air Boy Regulated Blow Gun

A safety blowgun equipped with automatic pressure reduction. If the tip is blocked, the air pressure will automatically be reduced to a lower pressure that fits the blowgun better in the blocked situation. Thereby, the blowgun can still be used in to some extend if it is blocked. This will also avoid damaging the blowgun.

These safety blowguns are available with either a bent or a straight pipe and is available with an air pressure reduction to max. 2.0 bar or 3.5 bar.

  • Bent pipe blow gun
  • 2.0 Bar pressure regulation when tip blocked
  • Maximum 16 bar pressure

Air Boy Regulated Blow Gun

Air Boy Regulated Blow Gun

A safety blowgun equipped with automatic pressure reduction. If the tip is blocked, the air pressure will automatically be reduced to a lower pressure that fits the blowgun better in the blocked situation. Thereby, the blowgun can still be used in to some extend if it is blocked. This will also avoid damaging the blowgun.

These safety blowguns are available with either a bent or a straight pipe and is available with an air pressure reduction to max. 2.0 bar or 3.5 bar.

  • Straight pipe blow gun
  • 2.0 Bar pressure regulation when tip blocked
  • Maximum 16 bar pressure

Air Boy Rubber Tip

Air Boy Rubber Tip

SKU: 124144124

Air Boy Rubber Tip

Rubber tip for Air Boy blow guns with an 8mm diameter pipe. Simply push onto the end of any Air Boy blow gun.

  • Suits all Air Boy blow guns with (standard) 8mm dia pipe.
  • Ideal to avoid scratching sensitive surfaces, or for blowing out small diameter pipes.

Air Boy Rubber Tip Blow Gun Air Boy Rubber Tip Blow Gun

Air Boy Rubber Tip Blow Gun

SKU: 124140101LK

Air Boy Rubber Tip Blow Gun

This rubber tip blow gun takes our standard 124140101 blow gun, and combines our +Lock rubber tip to provide a versatile rubber tipped blow gun.

This rubber tipped blow gun is ideal for cleaning delicate surfaces, or blowing out small diameter pipes.

  • The +Lock rubber tip can be simply removed / replaced by lifting the quick lock lip.
Air Boy Rubber Tip Nozzle | 35mm dia

Air Boy Rubber Tip Nozzle | 35mm dia

Removeable rubber tip. Connector actively locks on - won't come off until collar is lifted. 35mm dia is suitable for flushing larger hoses.

  • Suitable for all Air Boy blow (and other) guns with an 8mm dia pipe.
  • Actively locks onto the blow gun pipe.
  • Non-marring rubber surface protects against scratching delicate surfaces.

Air Boy Safety Blow Gun

Air Boy Safety Blow Gun

  • Air flow cuts off when nozzle depressed
  • 8mm bent pipe
  • Low level noise 74dB (8bar), 72dB (6bar)

Air Boy Safety Blow Gun

Air Boy Safety Blow Gun

With a low noise level, our Silent Air Boy¨ is ideal for you, who wants less noise during work.

The blowgun is at the same time unblockable, which ensures that the airflow continues through the sides of the pipe, if the tip is blocked.

  • Non block tip prevents ÒDead Hand"
  • Noise suppressor meets OH & S requirements
  • 74 dB at 8 bar
  • 72 dB at 6 bar

Air Boy Sand Blasting Gun

Air Boy Sand Blasting Gun

A specially hardened nozzle allows this gun to be used with any abrasive media, like sand, garnet etc

  • Removes corrosion, old paint, dirt, etc
  • Adjustable nozzle makes it possible to regulate quantity of abrasive media.
  • Max Working Pressure: 87-174 PSI (6-12 bar)

Air Boy Sand Blasting Kit Air Boy Sand Blasting Kit

Air Boy Sand Blasting Kit

SKU: 124145102

Air Boy Sand Blasting Kit

The Air Boy Sandblasting gun is a handy, powerful tool that easily removes rust and ingrained dirt. The sand quantity and suction force is infinitely adjustable and easily regulated with the trigger, where the air pressure is used to ease the operation of the handle.

This sand blasting kit is ideal for heavier duty tasks with the tube able to be inserted directly into the blasting media. This kit works with all forms of blasting media, including garnet.

CAUTION always use P2 respiratory protection, hearing protection, eye and facemask and gloves when using this blasting gun.

  • 1.8m hose

Air Boy Seal Kit | EPDM PP

Air Boy Seal Kit | EPDM PP

SKU: 124EP15-SEAL

Air Boy Seal Kit | EPDM PP

Air Boy 1.5 L EPDM PP Seal Kit - compatible with SKU 124EP15

Air Boy Seal Kit | Viton PP

Air Boy Seal Kit | Viton PP

SKU: 124VP15-SEAL

Air Boy Seal Kit | Viton PP

Air Boy 1.5L Viton PP Seal Kit - Compatible with SKU 124VP15

Air Boy Silent / Safety Blow Gun

Air Boy Silent / Safety Blow Gun

The Silent Air Boy¨ combines all the best features of our blow guns. It is silent with only 74 dB at 8 bar and complies with OSHAs and EU's requirements in regards to noise level. The construction of the nozzle ensures that the nozzle is unblockable and therefore complies with OSHA STD 1-13.1 requirements.

The ergonomic design is a classic in itself. We use the compressed air to ease the activating of the handle making it easy, accurate and simple to operate.

The Silent Air Boy¨ is produced in an impact-resistant acetal plastic (POM).

  • Maximum 16 Bar pressure
  • 260 l/min @ 8 Bar
  • 74dB @ 8 Bar

Air Boy Soda Blaster | Wide Nozzle Air Boy Soda Blaster | Wide Nozzle

Air Boy Soda Blaster | Wide Nozzle

Consumable wide nozzle for use with the Air Boy soda blasting gun (124145154).

  • 3 pack

Air Boy Soda Blaster Media

Air Boy Soda Blaster Media

Replacement soda blasting media for the Air Boy soda blaster. Soda blasting media is pure NAHCO3 (baking soda), with particle size optimised for soda blasting.

  • 5kg container
  • Always use P2 respiratory protection
  • Sodium Bicarbonate dissolves in water. Avoid inhaling dust.

Air Boy Soda Blaster Nozzle

Air Boy Soda Blaster Nozzle

Replacement nozzle for the Air Boy Soda Blaster gun (124145154).

Air Boy Soda Blasting Gun

Air Boy Soda Blasting Gun

SKU: 124145154

$229.00

Air Boy Soda Blasting Gun

Soda blasting is a fast and gentle method of removing paint, carbon, surface rust etc. It neither warms up / stretches sheet metal, and does not damage glass, rubber or plastic.

The soda media is environmentally friendly. It is not dangerous but may be harmful if inhaled as dust. So always use P2 respiratory protection, hearing protection, and eye and facemask when blasting.

Use with air compressors with at least a 450 litre air / min rating, and always use a water trap. Replacement soda media is available.

  • Precision nozzle requiring no manual adjustment
  • Optional wide nozzles available for faster blasting
  • Soda is environmentally friendly

Air Boy Straight Blow Gun Air Boy Straight Blow Gun

Air Boy Straight Blow Gun

  • Pipe length: 100mm
  • Pipe dia: 8mm
  • Inlet size: 1/4" BSP

Air Boy Straight Pipe Blow GunAir Boy Straight Pipe Blow GunAir Boy Straight Pipe Blow Gun

Air Boy Straight Pipe Blow Guns

Air Boy extra long blow guns fitted with Active Lock removeable rubber tips. Active Lock tips actively lock onto the blow gun, and will not come off until the collar is lifted.

Ideal for blowing out pipes, or any general cleaning where a non-marring tip is required. The 25mm dia Active Lock tip can blow out pipes up to 7/8" dia.

test
  • zz
  • zzzzz
  • zsdfsd

Air Boy Super Blow Gun

Air Boy Super Blow Gun

SKU: 124160100

Air Boy Super Blow Gun

A compact, all plastic blow gun allowing it to be used in areas where metal components would otherwise be a problem.

Air Boy Super Silent Nozzle

Air Boy Super Silent Nozzle

This push fit style fitting connects onto the end of any standard Air Boy blow gun converting the gun into a super silent version.

The nozzle restricts airflow to 330 litres / minute while also reducing the noise of the blow gun (meets OSHA).

The push fit style design allows the nozzle to be easily removed by simply lifting up the collar.

Air Boy Thrust Gun

Air Boy Thrust Gun

An optional nozzle for use with the Air Boy range of thrust guns. This nozzle has holes on the side, providing high volumes of airflow at 90 degrees to the pipe.

This nozzle is ideal for blowing out filters. This nozzle is provided with the 124140009 thrust gun, and is available separately for the other thrust guns.

Air Boy Thrust Gun

Air Boy Thrust Gun

A replacement THRUST nozzle for the Air Boy range of high airlflow THRUST blow guns. This nozzle increases the airflow by 100% due to the venturi principle. The nozzle is also unblockable, as the airflow can escape from the size if the tip becomes blocked.

  • 52mm overall length

Air Boy Tyre Inflator

Air Boy Tyre Inflator

Air Boy's professional quality tyre inflator fitted with new QT connector for leak free connections, providing the highest in inflation accuracy.

  • Smart design - handle operation eased by compressed air
  • 0-174 PSI (0-12 Bar)
  • Air escape / deflation valve

Air Boy Tyre Inflator Renewal Kit

Air Boy Tyre Inflator Renewal Kit

Genuine repair / renewal kit for all MK3 / MK4 inflators. Also compatible with Jamec TDR2000.

Air Boy Underbody Gun

Air Boy Underbody Gun

SKU: 124146100

Air Boy Underbody Gun

  • For treatment of vehicles subject to corrosion and stone chipping
  • Suitable for both water based and oil based fluids
  • Extension probes separately available
  • Max working pressure: 16 bar

Air Boy Underseal Gun

Air Boy Underseal Gun

For applying treatments to prevent corrosion / stone chipping.

  • Suitable for water / oil based fluids
  • Includes 900mm extension probe

Air Boy Venturi Nozzle

Air Boy Venturi Nozzle

Removeable rubber tip. Connector actively locks on - won't come off until collar is lifted. Venturi nozzle offers no block safety functionality, and increased air flow.

  • Fits all standard Air Boy blow guns, with 8mm diameter pipe.
  • Made in Denmark.

Air Boy Vortex Filter Air Boy Vortex Filter

Air Boy Vortex Filter

99.9999% EFFECTIVE! Inline point of use cyclonic filter. Removes 99.9999% of liquid / 99% solid particulates down to 1 Micron. ZERO ongoing maintenance costs.

  • Auto drain
  • 1/2" connection
  • 10 CFM flow rate | 232 PSI max pressure
  • No mains power required
  • No replacement filters
  • Instantaneous recovery from pulsed flows or stop start

Air Boy Air Breathing Adaptors

Air Breathing Adaptors

Air Boy air breathing adaptors are made with an optimised safety system that prevents unintended release. They are made in strong and impact resistant materials that together with their safety design ensure a long lasting, user friendly and safe fitting.

The Air Boy 580 series adaptors are compatible with EN 139 / EN 270 standards, and are interchangeable with Cejn 341 / 342 fittings.

Air Boy Air Breathing Couplers

Air Breathing Couplers

Air Boy air breathing couplers are made with an optimised safety system that prevents unintended release. They are made in strong and impact resistant materials that together with their safety design ensure a long lasting, user friendly and safe fitting.

The Air Boy 580 series couplers are compatible with EN 139 / EN 270 standards, and are interchangeable with Cejn 341 / 342 fittings.

  • Housing: Galvanised steel
  • Seals: Nitrile rubber
  • Springs: Stainless spring wire
  • Valve: POM / Acetal
  • Working pressure: 16 Bar
  • Burst pressure: 150 Bar
  • Temperature range: -20 degrees C to 60 degrees C
  • Flow diameter: 7.8mm

Air Breathing HoseAir Breathing Hose

Air Breathing Hoses

  • 10mm ID
  • With Air Breathing fittings
  • Australian made

Air Breathing HoseAir Breathing HoseAir Breathing Hose

Air Breathing Hoses

Specialised air breathing hose for applications where the airline is connected to breathing masks, such as in panel beating.

Air breathing hose is also available fitted with air breathing fittings. Air breathing fittings are also available separately.