A specialised cleaning gun for helping to remove bacteria from the air conditioning system. The gun injects cleaning fluid directly into the air conditioner evaporator.
The cleaning detergent leaves a protective layer in the air conditioning system that keeps it clean and at the same time secures a clean odour in the car. As quality and functionality always matters to Air Boy, our AC Cleaner is both easy to use and produced in impact-resistant quality materials that makes the tool very long lasting.
- Remove bacteria / odours
- Cleaning fluid available separately (SKU# AC-1L)
SKU | 124142175 |
Barcode # | 9321280319004 |
Brand | Air Boy |
Product weight | 5.2000kg |
Shipping weight | 13.010000kg |
12 Months
Others also bought
Air / Hand Powered Fluid Extractor
A combination air / hand powered pump for quickly extracting brake fluid, coolant, engine oil, transmission fluid etc. Do not use to extract petrol.
An optional hose to bleed brakes (with brake nipple connector) - ET3586-BRAK is also available.
- Massive 10L capacity avoids the need to remove drain plugs etc
- Supplied with 4 suction tubes (6mm oil | 7mm oil | brake fluid connector | 10mm gear oil)
ET1798-CLIP Promo
Transfer Syringe
A convenient transfer syringe with a 1.5 litre capacity, and 400mm extension tube.
This syringe is made from a high quality plastic that is resistant to most workshop fluids. The NBR seals supplied with this unit are designed for oil recovery, and should not be used with brake fluid (or other corrosive fluids like petrol / diesel).
- Robust plastic construction
- Transparent design
- Dual NBR seals
More from this category
A/C & Fuel Line Disconnect Set
For press type disconnection clips on Chrysler, Ford, Holden etc.
- Fuel line: 5/16” & 3/8”
- Air con: 3/8” | 1/2" | 5/8 ” | 3/4"
A/C Clutch Hub Puller Kit
This kit contains a wide range of air conditioning clutch hub pullers / installers for Ford, Holden, Chrysler and a range of other vehicles.
Included in this kit are forcing screws, removing flange, and adaptor assembly to install / remove most clutch hubs.
- Applications: Holden-Harrison DA-6, HR-6 and V5, A-6 and early R4 | Nippon Denso Ford / Chrysler A590, C171 & FS-6 | New Style, Sanden, York / Tecumesh HR980 | Zetex / Mitsubishi CH Series
A/C Compressor Belt Installer
Essential tool for A/C belt installation on Mazda 3 / Mazda 6 / Ford Focus.
A/C Compressor Seal & Bearing Service Kit
A comprehensive kit for replacing air conditioning seals, clutches and clutch bearings. This kit suits Diesek Kiki (Zexel) | Hitachi | Mitsubishi | Nippondenso | Seiko-Seiki | Sanden.
Ford A/C Compressor Stretch Belt Tool
Specialised tool for removing / installing the inner belt (on engines with two belts).
- Suits Ford Fiesta 1.6L (11-16)
- Equivalent to Gates 91032
Mercedes A/C Low Side Coupler Removal
A specialised tool for removing the A/C low side coupler on Mercedes vehicles.
- Applications: W204 | W211 | W219 | W221