BMW Vanos / VCT Socket | 22mm |16 Pt

SKU: ET8745

Automotive


A special 16 point impact socket for the centring valve of the camshaft timing on BMW & Mini Vanos unit and Ford VCT modules.

  • 16 Point impact socket
  • 22mm dia
  • 1/2" Sq Drv

303-1661-3

SKU ET8745
Barcode # 9321280402096
Brand Automotive
Product weight 0.0900kg
Shipping weight 0.090000kg
Vehicle Make Ford
Vehicle Make BMW
Vehicle Make BMW Mini

12 Months


More from this category


Crankshaft Front Oil Seal Tool Crankshaft Front Oil Seal Tool

Crankshaft Front Oil Seal Tool

Required tools when replacing the crank seal / removing front engine cover to replace the chain. For use on 2.0L | 2.2L | 2.4L | 3.2L TDCi / TDDi Duratorq engines fitted to Ford Transit | Ford Ranger plus Jaguar X Type X400 and Land Rover Defender.

  • First component removes diesel pump sprocket cover, and also allows oil seal to be removed / replaced.
  • Second component aligns / centralises the front camshaft chain cover before fitting the new oil seal.

Crankshaft Locking Tool

Crankshaft Locking Tool

For 4 Cyl Pumpe Duse diesel engines (1.9L | 2.0L engine with 2 & 4 valve) with arrow at 12 o'clock position with round sprockets. Also suited to FORD, SEAT & SKODA 1.9L TDi PD 3 & 4 cylinder engines.

  • OEM Equiv: T10050

Flywheel Locking Tool

Flywheel Locking Tool

SKU: ET0212

Flywheel Locking Tool

For 1.0L 3 Cyl EcoBoost GDTi engines.

  • OEM Equiv: 303-1602

Flywheel Locking Tool

Flywheel Locking Tool

SKU: ET1374

Flywheel Locking Tool

This set locks / holds the flywheel in position to allow the release of the crankshaft pulley screws during timing belt replacement. It has the same functions as ET1574 but with the extra locking adaptors expanding its use on a larger model group in the Ford petrol & diesel engine range.

  • Applications across a wide range of Ford engines especially: Diesel 1.8TDdi / TDCi 2.0TDCi, Petrol: 1.6Ti-VCT | later 1.25L / 1.4L 16v Duratec
  • Adaptor lengths: 11mm | 29mm | 42mm

Ford / JLR Oil Pump Alignment Tool

Ford / JLR Oil Pump Alignment Tool

Oil pump locking tool for 2.0L, 2.2L, 2.4L, 3.2L diesel engines and 2.3L Duratec petrol engines.

Allows the oil pump to be removed / replaced in the same position (to ensure that the oil pump is not operating with excessive side loads).

  • Mondeo | Ranger | Transit (2.0 / 2.2 / 2.4 / 3.2 TDCi / TDDi / Di Duratorq)
  • OEM Equiv: 303-705 | 303-1093 (PSA 0198H)

Ford Auxiliary Belt Tensioner Tool

Ford Auxiliary Belt Tensioner Tool

ideally suited for operating the belt tensioning device, to allow easy belt changing. Especially suitable for hard to reach areas.

  • Internal square drive adaptor
  • Applications: Duratorq 2.0L | 2.2L TDDi and TDCi
  • Engine codes: D5BA, D6BA, HJBA, HJBC, FMBA, N7BA, QJBB, QJBA